Re: [PATCH v2 17/17] sh: landisk CPLD interrupt controller driver

From: Rob Herring
Date: Tue Jun 14 2016 - 18:24:47 EST


On Sun, Jun 12, 2016 at 04:44:14PM +0900, Yoshinori Sato wrote:
> Sorry. I send old patches.
> Please ignore previous files.

same comment here.

>
> Signed-off-by: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
> ---
> .../interrupt-controller/iodata-landisk.txt | 28 +++++++++
> drivers/irqchip/irq-io-landisk.c | 72 ++++++++++++++++++++++
> 2 files changed, 100 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt
> create mode 100644 drivers/irqchip/irq-io-landisk.c
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt b/Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt
> new file mode 100644
> index 0000000..d398538
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/iodata-landisk.txt
> @@ -0,0 +1,28 @@
> +DT bindings for the I/O DATA HDL-U interrupt controller
> +
> +Required properties:
> +
> + - compatible: has to be "iodata,landisk-intc".
> +
> + - reg: Base address and length of interrupt controller register.
> +
> + - interrupt-controller: Identifies the node as an interrupt controller.
> +
> + - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined
> + in interrupts.txt in this directory.
> +
> + - interrupt-map: Interrupt mapping on parent controller.
> +
> +Example
> +-------
> +
> + cpldintc: cpld@b0000000 {
> + compatible = "iodata,landisk-intc";
> + #interrupt-cells = <2>;
> + interrupt-controller;
> + reg = <0xb0000000 8>;
> + interrupt-map=<0 &shintc 0 0>, <1 &shintc 1 0>,
> + <2 &shintc 2 0>, <3 &shintc 3 0>,
> + <4 &shintc 4 0>, <5 &shintc 5 0>,
> + <6 &shintc 6 0>, <7 &shintc 7 0>;

This is not right. Since this node has 2 interrupt-cells, you need 2
entries for the child-interrupt specifier. You also need to set
#address-cells to 0 and set the mask to mask out the 2nd cell.

Then again, there is not any real translation happening here, so perhaps
you don't need this at all.

Rob