[PATCH 04/13] RTC: ds1307: Convert ds1307_can_wakeup_device into a predicate
From: Andrey Smirnov
Date: Wed Jun 15 2016 - 02:00:42 EST
Convert ds1307_can_wakeup_device in ds1307_probe into a predicate in
order to make various chunks of code in that function less connected to
each other.
Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
---
drivers/rtc/rtc-ds1307.c | 35 ++++++++++++++++++-----------------
1 file changed, 18 insertions(+), 17 deletions(-)
diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
index 54cc527..c482d8b 100644
--- a/drivers/rtc/rtc-ds1307.c
+++ b/drivers/rtc/rtc-ds1307.c
@@ -1232,6 +1232,21 @@ static void ds1307_clks_register(struct ds1307 *ds1307)
#endif /* CONFIG_COMMON_CLK */
+static bool ds1307_can_wakeup_device(const struct ds1307 *ds1307)
+{
+
+/*
+ * For devices with no IRQ directly connected to the SoC, the RTC chip
+ * can be forced as a wakeup source by stating that explicitly in
+ * the device's .dts file using the "wakeup-source" boolean property.
+ * If the "wakeup-source" property is set, don't request an IRQ.
+ * This will guarantee the 'wakealarm' sysfs entry is available on the device,
+ * if supported by the RTC.
+ */
+ return of_property_read_bool(ds1307->client->dev.of_node,
+ "wakeup-source");
+}
+
static int ds1307_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -1241,7 +1256,6 @@ static int ds1307_probe(struct i2c_client *client,
struct chip_desc *chip = &chips[id->driver_data];
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
bool want_irq = false;
- bool ds1307_can_wakeup_device = false;
unsigned char *buf;
struct ds1307_platform_data *pdata = dev_get_platdata(&client->dev);
irq_handler_t irq_handler = ds1307_irq;
@@ -1290,20 +1304,6 @@ static int ds1307_probe(struct i2c_client *client,
ds1307->write_block_data = ds1307_write_block_data;
}
-#ifdef CONFIG_OF
-/*
- * For devices with no IRQ directly connected to the SoC, the RTC chip
- * can be forced as a wakeup source by stating that explicitly in
- * the device's .dts file using the "wakeup-source" boolean property.
- * If the "wakeup-source" property is set, don't request an IRQ.
- * This will guarantee the 'wakealarm' sysfs entry is available on the device,
- * if supported by the RTC.
- */
- if (of_property_read_bool(client->dev.of_node, "wakeup-source")) {
- ds1307_can_wakeup_device = true;
- }
-#endif
-
switch (ds1307->type) {
case ds_1337:
case ds_1339:
@@ -1357,7 +1357,7 @@ static int ds1307_probe(struct i2c_client *client,
ds1307->regs[0] &= ~(DS1337_BIT_A2IE | DS1337_BIT_A1IE);
if (chip->alarm && (ds1307->client->irq > 0 ||
- ds1307_can_wakeup_device))
+ ds1307_can_wakeup_device(ds1307)))
want_irq = true;
i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL,
@@ -1567,7 +1567,8 @@ read_rtc:
return PTR_ERR(ds1307->rtc);
}
- if (ds1307_can_wakeup_device && ds1307->client->irq <= 0) {
+ if (ds1307_can_wakeup_device(ds1307) &&
+ ds1307->client->irq <= 0) {
/* Disable request for an IRQ */
want_irq = false;
dev_info(&client->dev, "'wakeup-source' is set, request for an IRQ is disabled!\n");
--
2.5.5