[PATCH 05/15] drivers: net: cpsw: ndev: fix accessing to suspended device

[Grygorii Strashko]

The CPSW might be suspended by RPM if all ethX interfaces are down,
but it still could be accesible through net_device_ops interfce. In
this case net_device_ops operations, requiring registers access, will
cause L3 errors and CPSW crash.

Hence, fix it by adding RPM get/put calls in net_device_ops callbacks
which can access CPSW registers: .ndo_set_mac_address(),
.ndo_vlan_rx_add_vid(), .ndo_vlan_rx_kill_vid().

Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
---
 drivers/net/ethernet/ti/cpsw.c | 33 ++++++++++++++++++++++++++++++---
 1 file changed, 30 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 1ba0c09..591d1c3 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -1633,10 +1633,17 @@ static int cpsw_ndo_set_mac_address(struct net_device *ndev, void *p)
 	struct sockaddr *addr = (struct sockaddr *)p;
 	int flags = 0;
 	u16 vid = 0;
+	int ret;
 
 	if (!is_valid_ether_addr(addr->sa_data))
 		return -EADDRNOTAVAIL;
 
+	ret = pm_runtime_get_sync(&priv->pdev->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(&priv->pdev->dev);
+		return ret;
+	}
+
 	if (priv->data.dual_emac) {
 		vid = priv->slaves[priv->emac_port].port_vlan;
 		flags = ALE_VLAN;
@@ -1651,6 +1658,8 @@ static int cpsw_ndo_set_mac_address(struct net_device *ndev, void *p)
 	memcpy(ndev->dev_addr, priv->mac_addr, ETH_ALEN);
 	for_each_slave(priv, cpsw_set_slave_mac, priv);
 
+	pm_runtime_put(&priv->pdev->dev);
+
 	return 0;
 }
 
@@ -1715,10 +1724,17 @@ static int cpsw_ndo_vlan_rx_add_vid(struct net_device *ndev,
 				    __be16 proto, u16 vid)
 {
 	struct cpsw_priv *priv = netdev_priv(ndev);
+	int ret;
 
 	if (vid == priv->data.default_vlan)
 		return 0;
 
+	ret = pm_runtime_get_sync(&priv->pdev->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(&priv->pdev->dev);
+		return ret;
+	}
+
 	if (priv->data.dual_emac) {
 		/* In dual EMAC, reserved VLAN id should not be used for
 		 * creating VLAN interfaces as this can break the dual
@@ -1733,7 +1749,10 @@ static int cpsw_ndo_vlan_rx_add_vid(struct net_device *ndev,
 	}
 
 	dev_info(priv->dev, "Adding vlanid %d to vlan filter\n", vid);
-	return cpsw_add_vlan_ale_entry(priv, vid);
+	ret = cpsw_add_vlan_ale_entry(priv, vid);
+
+	pm_runtime_put(&priv->pdev->dev);
+	return ret;
 }
 
 static int cpsw_ndo_vlan_rx_kill_vid(struct net_device *ndev,
@@ -1745,6 +1764,12 @@ static int cpsw_ndo_vlan_rx_kill_vid(struct net_device *ndev,
 	if (vid == priv->data.default_vlan)
 		return 0;
 
+	ret = pm_runtime_get_sync(&priv->pdev->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(&priv->pdev->dev);
+		return ret;
+	}
+
 	if (priv->data.dual_emac) {
 		int i;
 
@@ -1764,8 +1789,10 @@ static int cpsw_ndo_vlan_rx_kill_vid(struct net_device *ndev,
 	if (ret != 0)
 		return ret;
 
-	return cpsw_ale_del_mcast(priv->ale, priv->ndev->broadcast,
-				  0, ALE_VLAN, vid);
+	ret = cpsw_ale_del_mcast(priv->ale, priv->ndev->broadcast,
+				 0, ALE_VLAN, vid);
+	pm_runtime_put(&priv->pdev->dev);
+	return ret;
 }
 
 static const struct net_device_ops cpsw_netdev_ops = {
-- 
2.8.4