Re: net: stmmac: dwmac-rk: fixes for Wake-on-Lan on RK3288
From: Vincent Palatin
Date: Wed Jun 15 2016 - 13:04:41 EST
On Sun, Jun 12, 2016 at 11:46 PM, Giuseppe CAVALLARO
<peppe.cavallaro@xxxxxx> wrote:
> On 6/11/2016 3:00 AM, Vincent Palatin wrote:
>>
>> In order to support Wake-On-Lan when using the RK3288 integrated MAC
>> (with an external RGMII PHY), we need to avoid shutting down the regulator
>> of the external PHY when the MAC is suspended as it's currently done in
>> the MAC
>> platform code.
>> As a first step, create independant callbacks for suspend/resume rather
>> than
>> re-using exit/init callbacks. So the dwmac platform driver can behave
>> differently
>> on suspend where it might skip shutting the PHY and at module unloading.
>> Then update the dwmac-rk driver to switch off the PHY regulator only if we
>> are
>> not planning to wake up from the LAN.
>> Finally add the PMT interrupt to the MAC device tree configuration, so we
>> can
>> wake up the core from it when the PHY has received the magic packet.
>
>
> IMO these could be sent for net-next and also other glue logic
> files should be reworked in order to use the new API for coherence.
Given they will have the same set of functions for exit/init and
suspend/resume, you mean duplicating the callbacks like this :
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c
@@ -359,6 +359,8 @@ static int sti_dwmac_probe(struct platform_device *pdev)
plat_dat->bsp_priv = dwmac;
plat_dat->init = sti_dwmac_init;
plat_dat->exit = sti_dwmac_exit;
+ plat_dat->suspend = sti_dwmac_exit;
+ plat_dat->resume = sti_dwmac_init;
plat_dat->fix_mac_speed = data->fix_retime_src;
ret = sti_dwmac_init(pdev, plat_dat->bsp_priv);
Is this anyhow useful ?
--
Vincent