Re: [PATCH v5 2/3] drm/arm: Add support for Mali Display Processors

From: Liviu Dudau
Date: Wed Jun 15 2016 - 13:21:16 EST

On Wed, Jun 15, 2016 at 07:13:15PM +0200, Daniel Vetter wrote:
> On Wed, Jun 15, 2016 at 6:17 PM, Liviu Dudau <Liviu.Dudau@xxxxxxx> wrote:
> > On Wed, Jun 15, 2016 at 05:23:10PM +0200, Daniel Vetter wrote:
> >> On Wed, Jun 15, 2016 at 03:51:34PM +0100, Liviu Dudau wrote:
> >> > Add support for the new family of Display Processors from ARM Ltd.
> >> > This commit adds basic support for Mali DP500, DP550 and DP650
> >> > parts, with only the display engine being supported at the moment.
> >> >
> >> > Cc: David Brown <David.Brown@xxxxxxx>
> >> > Cc: Brian Starkey <Brian.Starkey@xxxxxxx>
> >> >
> >> > Signed-off-by: Liviu Dudau <Liviu.Dudau@xxxxxxx>
> >>
> >> Small thing I noticed: drm_dev_register/connector_register_all should be
> >> the last step in your init code, and unregister the first. Atm it's
> >> somewhere in the middle. But perfectly fine to do that as a follow-up.
> >
> > I've tried that, but the connector and encoder that gets registered as part
> > of the component_bind_all() fails if there is no drm dev registered. You did
> > comment on the v4 version about that and I did test your idea, sorry for
> > forgeting to update you on that.
>
> Why does it fail? That shouldn't happen ... we need to be able to set
> up everything first, before we register.

Could be the tda998x_drv fault, but I'm getting this splat:

[ 1.347687] kobject_add_internal failed for card0-HDMI-A-1 (error: -2 parent: card0)
[ 1.355420] ------------[ cut here ]------------
[ 1.360015] WARNING: CPU: 3 PID: 1 at /work/repositories/kernel/lib/kobject.c:244 kobject_add_internal+0xd8/0x290
[ 1.370202] Modules linked in:
[ 1.373238]
[ 1.374724] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc2+ #2
[ 1.380941] Hardware name: ARM Juno development board (r0) (DT)
[ 1.386816] task: ffffffc976ca0000 ti: ffffffc976ca8000 task.ti: ffffffc976ca8000
[ 1.394251] PC is at kobject_add_internal+0xd8/0x290
[ 1.399179] LR is at kobject_add_internal+0xd8/0x290
[ 1.404107] pc : [<ffffff8008344730>] lr : [<ffffff8008344730>] pstate: 60000045
[ 1.411452] sp : ffffffc976cab7f0
[ 1.414742] x29: ffffffc976cab7f0 x28: ffffff8008c5bbb8
[ 1.420022] x27: ffffffc0799c3810 x26: ffffff80089f8a10
[ 1.425302] x25: 0000000000000000 x24: ffffffc0799c2000
[ 1.430582] x23: ffffff8008bddc78 x22: ffffffc0799c2000
[ 1.435861] x21: ffffffc0799c2010 x20: 00000000fffffffe
[ 1.441139] x19: ffffffc0799c3810 x18: 0000000000000010
[ 1.446418] x17: 0000000000000000 x16: 0000000000000000
[ 1.451697] x15: ffffff8088c35c87 x14: 6163203a746e6572
[ 1.456976] x13: 617020322d203a72 x12: 6f7272652820312d
[ 1.462255] x11: 412d494d44482d30 x10: 6472616320726f66
[ 1.467533] x9 : 2064656c69616620 x8 : 00000000000000a1
[ 1.472812] x7 : 5f6464615f746365 x6 : 000000000000000a
[ 1.478091] x5 : ffffffc976453c18 x4 : 0000000000000000
[ 1.483370] x3 : 0000000000000000 x2 : ffffff8008baa7b8
[ 1.488649] x1 : ffffffc976ca8000 x0 : 0000000000000048
[ 1.493927]
[ 1.495421] ---[ end trace b193c9c9e93296f4 ]---
[ 1.500002] Call trace:
[ 1.502434] Exception stack(0xffffffc976cab630 to 0xffffffc976cab750)
[ 1.508827] b620: ffffffc0799c3810 00000000fffffffe
[ 1.516608] b640: ffffffc976cab7f0 ffffff8008344730 ffffffc976cab670 ffffff80080f81dc
[ 1.524389] b660: ffffff80089b7570 0000000108c35000 ffffffc976cab710 ffffff80080f8500
[ 1.532170] b680: ffffffc0799c3810 00000000fffffffe ffffffc0799c2010 ffffffc0799c2000
[ 1.539951] b6a0: ffffff8008bddc78 ffffffc0799c2000 0000000000000000 ffffff80089f8a10
[ 1.547731] b6c0: ffffffc0799c3810 ffffff8008c5bbb8 0000000000000048 ffffffc976ca8000
[ 1.555511] b6e0: ffffff8008baa7b8 0000000000000000 0000000000000000 ffffffc976453c18
[ 1.563292] b700: 000000000000000a 5f6464615f746365 00000000000000a1 2064656c69616620
[ 1.571073] b720: 6472616320726f66 412d494d44482d30 6f7272652820312d 617020322d203a72
[ 1.578851] b740: 6163203a746e6572 ffffff8088c35c87
[ 1.583695] [<ffffff8008344730>] kobject_add_internal+0xd8/0x290
[ 1.589658] [<ffffff800834496c>] kobject_add+0x84/0xd0
[ 1.594763] [<ffffff8008484e94>] device_add+0xc4/0x548
[ 1.599867] [<ffffff8008485568>] device_create_groups_vargs+0x108/0x118
[ 1.606432] [<ffffff8008485644>] device_create_with_groups+0x3c/0x48
[ 1.612742] [<ffffff80084630cc>] drm_sysfs_connector_add+0x5c/0xd0
[ 1.618880] [<ffffff80084671f0>] drm_connector_register+0x18/0xa0
[ 1.624930] [<ffffff80084809b8>] tda998x_bind+0x5f8/0x6c0
[ 1.630292] [<ffffff8008482f94>] component_bind_all+0xfc/0x258
[ 1.636083] [<ffffff800847d1a4>] malidp_bind+0x3b4/0x528
[ 1.641357] [<ffffff8008482be8>] try_to_bring_up_master+0x140/0x1a0
[ 1.647579] [<ffffff8008482ce0>] component_add+0x98/0x170
[ 1.652940] [<ffffff800847fc18>] tda998x_probe+0x18/0x20
[ 1.658216] [<ffffff80085f087c>] i2c_device_probe+0x164/0x228
[ 1.663921] [<ffffff8008488124>] driver_probe_device+0x204/0x2b0
[ 1.669884] [<ffffff800848827c>] __driver_attach+0xac/0xb0
[ 1.675330] [<ffffff80084860d8>] bus_for_each_dev+0x60/0xa0
[ 1.680862] [<ffffff80084878b0>] driver_attach+0x20/0x28
[ 1.686135] [<ffffff80084874a8>] bus_add_driver+0x1d0/0x238
[ 1.691668] [<ffffff8008488a40>] driver_register+0x60/0xf8
[ 1.697116] [<ffffff80085f19e0>] i2c_register_driver+0x38/0x88
[ 1.702909] [<ffffff8008ad6a4c>] tda998x_driver_init+0x18/0x20
[ 1.708701] [<ffffff8008081a10>] do_one_initcall+0x38/0x128
[ 1.714234] [<ffffff8008ab0cc0>] kernel_init_freeable+0x14c/0x1f0
[ 1.720286] [<ffffff8008782b08>] kernel_init+0x10/0x100
[ 1.725475] [<ffffff8008084e10>] ret_from_fork+0x10/0x40
[ 1.730771] [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -2
[ 1.745136] mali-dp 6f200000.malidp: failed to bind 1-0070 (ops tda998x_ops): -2
[ 1.752506] [drm:malidp_bind] *ERROR* Failed to bind all components

Best regards,
Liviu


> -Daniel
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
>

--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
Â\_(ã)_/Â