[RFC] [PATCH 1/3] staging: media: omap1: drop videobuf-dma-sg mode
From: Janusz Krzysztofik
Date: Thu Jun 16 2016 - 13:23:01 EST
For over 20 last kernel versions the driver has been able to allocate
DMA buffers in videobuf-dma-contig mode without any issues. Drop the
no longer needed sg mode in preparation for conversion to videobuf2.
Created and tested on Amstrad Delta against Linux-4.7-rc3 with
omap1_camera and ov6650 fixes applied.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
---
drivers/staging/media/omap1/Kconfig | 1 -
drivers/staging/media/omap1/omap1_camera.c | 445 ++++-------------------
include/linux/platform_data/media/omap1_camera.h | 9 -
3 files changed, 77 insertions(+), 378 deletions(-)
diff --git a/drivers/staging/media/omap1/Kconfig b/drivers/staging/media/omap1/Kconfig
index 6cfab3a..e2a39f5 100644
--- a/drivers/staging/media/omap1/Kconfig
+++ b/drivers/staging/media/omap1/Kconfig
@@ -4,7 +4,6 @@ config VIDEO_OMAP1
depends on ARCH_OMAP1
depends on HAS_DMA
select VIDEOBUF_DMA_CONTIG
- select VIDEOBUF_DMA_SG
---help---
This is a v4l2 driver for the TI OMAP1 camera interface
diff --git a/drivers/staging/media/omap1/omap1_camera.c b/drivers/staging/media/omap1/omap1_camera.c
index 9b6140a..37ef4da 100644
--- a/drivers/staging/media/omap1/omap1_camera.c
+++ b/drivers/staging/media/omap1/omap1_camera.c
@@ -32,13 +32,12 @@
#include <media/soc_camera.h>
#include <media/drv-intf/soc_mediabus.h>
#include <media/videobuf-dma-contig.h>
-#include <media/videobuf-dma-sg.h>
#include <linux/omap-dma.h>
#define DRIVER_NAME "omap1-camera"
-#define DRIVER_VERSION "0.0.2"
+#define DRIVER_VERSION "0.0.3"
#define OMAP_DMA_CAMERA_IF_RX 20
@@ -114,22 +113,18 @@
#define FIFO_SHIFT __fls(FIFO_SIZE)
#define DMA_BURST_SHIFT (1 + OMAP_DMA_DATA_BURST_4)
-#define DMA_BURST_SIZE (1 << DMA_BURST_SHIFT)
+#define DMA_BURST_SIZE BIT(DMA_BURST_SHIFT)
#define DMA_ELEMENT_SHIFT OMAP_DMA_DATA_TYPE_S32
-#define DMA_ELEMENT_SIZE (1 << DMA_ELEMENT_SHIFT)
+#define DMA_ELEMENT_SIZE BIT(DMA_ELEMENT_SHIFT)
-#define DMA_FRAME_SHIFT_CONTIG (FIFO_SHIFT - 1)
-#define DMA_FRAME_SHIFT_SG DMA_BURST_SHIFT
-
-#define DMA_FRAME_SHIFT(x) ((x) == OMAP1_CAM_DMA_CONTIG ? \
- DMA_FRAME_SHIFT_CONTIG : \
- DMA_FRAME_SHIFT_SG)
-#define DMA_FRAME_SIZE(x) (1 << DMA_FRAME_SHIFT(x))
+#define DMA_FRAME_SHIFT (FIFO_SHIFT - 1)
+#define DMA_FRAME_SIZE BIT(DMA_FRAME_SHIFT)
#define DMA_SYNC OMAP_DMA_SYNC_FRAME
#define THRESHOLD_LEVEL DMA_FRAME_SIZE
-
+#define OMAP1_CAMERA_MIN_BUF_COUNT \
+ 3
#define MAX_VIDEO_MEM 4 /* arbitrary video memory limit in MB */
@@ -140,12 +135,8 @@
/* buffer for one video frame */
struct omap1_cam_buf {
struct videobuf_buffer vb;
- u32 code;
+ u32 code;
int inwork;
- struct scatterlist *sgbuf;
- int sgcount;
- int bytes_left;
- enum videobuf_state result;
};
struct omap1_cam_dev {
@@ -170,11 +161,6 @@ struct omap1_cam_dev {
struct omap1_cam_buf *active;
struct omap1_cam_buf *ready;
- enum omap1_cam_vb_mode vb_mode;
- int (*mmap_mapper)(struct videobuf_queue *q,
- struct videobuf_buffer *buf,
- struct vm_area_struct *vma);
-
u32 reg_cache[0];
};
@@ -205,13 +191,11 @@ static int omap1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
unsigned int *size)
{
struct soc_camera_device *icd = vq->priv_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct omap1_cam_dev *pcdev = ici->priv;
*size = icd->sizeimage;
- if (!*count || *count < OMAP1_CAMERA_MIN_BUF_COUNT(pcdev->vb_mode))
- *count = OMAP1_CAMERA_MIN_BUF_COUNT(pcdev->vb_mode);
+ if (!*count || *count < OMAP1_CAMERA_MIN_BUF_COUNT)
+ *count = OMAP1_CAMERA_MIN_BUF_COUNT;
if (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
*count = (MAX_VIDEO_MEM * 1024 * 1024) / *size;
@@ -222,8 +206,7 @@ static int omap1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
return 0;
}
-static void free_buffer(struct videobuf_queue *vq, struct omap1_cam_buf *buf,
- enum omap1_cam_vb_mode vb_mode)
+static void free_buffer(struct videobuf_queue *vq, struct omap1_cam_buf *buf)
{
struct videobuf_buffer *vb = &buf->vb;
@@ -231,16 +214,7 @@ static void free_buffer(struct videobuf_queue *vq, struct omap1_cam_buf *buf,
videobuf_waiton(vq, vb, 0, 0);
- if (vb_mode == OMAP1_CAM_DMA_CONTIG) {
- videobuf_dma_contig_free(vq, vb);
- } else {
- struct soc_camera_device *icd = vq->priv_data;
- struct device *dev = icd->parent;
- struct videobuf_dmabuf *dma = videobuf_to_dma(vb);
-
- videobuf_dma_unmap(dev, dma);
- videobuf_dma_free(dma);
- }
+ videobuf_dma_contig_free(vq, vb);
vb->state = VIDEOBUF_NEEDS_INIT;
}
@@ -250,8 +224,6 @@ static int omap1_videobuf_prepare(struct videobuf_queue *vq,
{
struct soc_camera_device *icd = vq->priv_data;
struct omap1_cam_buf *buf = container_of(vb, struct omap1_cam_buf, vb);
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct omap1_cam_dev *pcdev = ici->priv;
int ret;
WARN_ON(!list_empty(&vb->queue));
@@ -288,56 +260,25 @@ static int omap1_videobuf_prepare(struct videobuf_queue *vq,
return 0;
fail:
- free_buffer(vq, buf, pcdev->vb_mode);
+ free_buffer(vq, buf);
out:
buf->inwork = 0;
return ret;
}
-static void set_dma_dest_params(int dma_ch, struct omap1_cam_buf *buf,
- enum omap1_cam_vb_mode vb_mode)
+static void set_dma_dest_params(int dma_ch, struct omap1_cam_buf *buf)
{
dma_addr_t dma_addr;
unsigned int block_size;
- if (vb_mode == OMAP1_CAM_DMA_CONTIG) {
- dma_addr = videobuf_to_dma_contig(&buf->vb);
- block_size = buf->vb.size;
- } else {
- if (WARN_ON(!buf->sgbuf)) {
- buf->result = VIDEOBUF_ERROR;
- return;
- }
- dma_addr = sg_dma_address(buf->sgbuf);
- if (WARN_ON(!dma_addr)) {
- buf->sgbuf = NULL;
- buf->result = VIDEOBUF_ERROR;
- return;
- }
- block_size = sg_dma_len(buf->sgbuf);
- if (WARN_ON(!block_size)) {
- buf->sgbuf = NULL;
- buf->result = VIDEOBUF_ERROR;
- return;
- }
- if (unlikely(buf->bytes_left < block_size))
- block_size = buf->bytes_left;
- if (WARN_ON(dma_addr & (DMA_FRAME_SIZE(vb_mode) *
- DMA_ELEMENT_SIZE - 1))) {
- dma_addr = ALIGN(dma_addr, DMA_FRAME_SIZE(vb_mode) *
- DMA_ELEMENT_SIZE);
- block_size &= ~(DMA_FRAME_SIZE(vb_mode) *
- DMA_ELEMENT_SIZE - 1);
- }
- buf->bytes_left -= block_size;
- buf->sgcount++;
- }
+ dma_addr = videobuf_to_dma_contig(&buf->vb);
+ block_size = buf->vb.size;
omap_set_dma_dest_params(dma_ch,
OMAP_DMA_PORT_EMIFF, OMAP_DMA_AMODE_POST_INC, dma_addr, 0, 0);
omap_set_dma_transfer_params(dma_ch,
- OMAP_DMA_DATA_TYPE_S32, DMA_FRAME_SIZE(vb_mode),
- block_size >> (DMA_FRAME_SHIFT(vb_mode) + DMA_ELEMENT_SHIFT),
+ OMAP_DMA_DATA_TYPE_S32, DMA_FRAME_SIZE,
+ block_size >> (DMA_FRAME_SHIFT + DMA_ELEMENT_SHIFT),
DMA_SYNC, 0, 0);
}
@@ -360,68 +301,16 @@ static struct omap1_cam_buf *prepare_next_vb(struct omap1_cam_dev *pcdev)
list_del_init(&buf->vb.queue);
}
- if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
- /*
- * In CONTIG mode, we can safely enter next buffer parameters
- * into the DMA programming register set after the DMA
- * has already been activated on the previous buffer
- */
- set_dma_dest_params(pcdev->dma_ch, buf, pcdev->vb_mode);
- } else {
- /*
- * In SG mode, the above is not safe since there are probably
- * a bunch of sgbufs from previous sglist still pending.
- * Instead, mark the sglist fresh for the upcoming
- * try_next_sgbuf().
- */
- buf->sgbuf = NULL;
- }
+ /*
+ * In CONTIG mode, we can safely enter next buffer parameters
+ * into the DMA programming register set after the DMA
+ * has already been activated on the previous buffer
+ */
+ set_dma_dest_params(pcdev->dma_ch, buf);
return buf;
}
-static struct scatterlist *try_next_sgbuf(int dma_ch, struct omap1_cam_buf *buf)
-{
- struct scatterlist *sgbuf;
-
- if (likely(buf->sgbuf)) {
- /* current sglist is active */
- if (unlikely(!buf->bytes_left)) {
- /* indicate sglist complete */
- sgbuf = NULL;
- } else {
- /* process next sgbuf */
- sgbuf = sg_next(buf->sgbuf);
- if (WARN_ON(!sgbuf)) {
- buf->result = VIDEOBUF_ERROR;
- } else if (WARN_ON(!sg_dma_len(sgbuf))) {
- sgbuf = NULL;
- buf->result = VIDEOBUF_ERROR;
- }
- }
- buf->sgbuf = sgbuf;
- } else {
- /* sglist is fresh, initialize it before using */
- struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb);
-
- sgbuf = dma->sglist;
- if (!(WARN_ON(!sgbuf))) {
- buf->sgbuf = sgbuf;
- buf->sgcount = 0;
- buf->bytes_left = buf->vb.size;
- buf->result = VIDEOBUF_DONE;
- }
- }
- if (sgbuf)
- /*
- * Put our next sgbuf parameters (address, size)
- * into the DMA programming register set.
- */
- set_dma_dest_params(dma_ch, buf, OMAP1_CAM_DMA_SG);
-
- return sgbuf;
-}
-
static void start_capture(struct omap1_cam_dev *pcdev)
{
struct omap1_cam_buf *buf = pcdev->active;
@@ -445,15 +334,6 @@ static void start_capture(struct omap1_cam_dev *pcdev)
omap_start_dma(pcdev->dma_ch);
- if (pcdev->vb_mode == OMAP1_CAM_DMA_SG) {
- /*
- * In SG mode, it's a good moment for fetching next sgbuf
- * from the current sglist and, if available, already putting
- * its parameters into the DMA programming register set.
- */
- try_next_sgbuf(pcdev->dma_ch, buf);
- }
-
/* (re)enable pixel clock */
CAM_WRITE(pcdev, CTRLCLOCK, ctrlclock | LCLK_EN);
/* release FIFO reset */
@@ -511,18 +391,9 @@ static void omap1_videobuf_queue(struct videobuf_queue *vq,
dev_dbg(icd->parent,
"%s: capture not active, setup FIFO, start DMA\n", __func__);
mode = CAM_READ_CACHE(pcdev, MODE) & ~THRESHOLD_MASK;
- mode |= THRESHOLD_LEVEL(pcdev->vb_mode) << THRESHOLD_SHIFT;
+ mode |= THRESHOLD_LEVEL << THRESHOLD_SHIFT;
CAM_WRITE(pcdev, MODE, mode | EN_FIFO_FULL | DMA);
- if (pcdev->vb_mode == OMAP1_CAM_DMA_SG) {
- /*
- * In SG mode, the above prepare_next_vb() didn't actually
- * put anything into the DMA programming register set,
- * so we have to do it now, before activating DMA.
- */
- try_next_sgbuf(pcdev->dma_ch, buf);
- }
-
start_capture(pcdev);
}
@@ -533,8 +404,6 @@ static void omap1_videobuf_release(struct videobuf_queue *vq,
container_of(vb, struct omap1_cam_buf, vb);
struct soc_camera_device *icd = vq->priv_data;
struct device *dev = icd->parent;
- struct soc_camera_host *ici = to_soc_camera_host(dev);
- struct omap1_cam_dev *pcdev = ici->priv;
switch (vb->state) {
case VIDEOBUF_DONE:
@@ -554,7 +423,7 @@ static void omap1_videobuf_release(struct videobuf_queue *vq,
break;
}
- free_buffer(vq, buf, pcdev->vb_mode);
+ free_buffer(vq, buf);
}
static void videobuf_done(struct omap1_cam_dev *pcdev,
@@ -580,8 +449,7 @@ static void videobuf_done(struct omap1_cam_dev *pcdev,
* No next buffer has been entered into the DMA
* programming register set on time (could be done only
* while the previous DMA interurpt was processed, not
- * later), so the last DMA block, be it a whole buffer
- * if in CONTIG or its last sgbuf if in SG mode, is
+ * later), so the last DMA block (whole buffer) is
* about to be reused by the just autoreinitialized DMA
* engine, and overwritten with next frame data. Best we
* can do is stopping the capture as soon as possible,
@@ -615,7 +483,7 @@ static void videobuf_done(struct omap1_cam_dev *pcdev,
}
} else if (pcdev->ready) {
/*
- * In both CONTIG and SG mode, the DMA engine has possibly
+ * The DMA engine has possibly
* been already autoreinitialized with the preprogrammed
* pcdev->ready buffer. We can either accept this fact
* and just swap the buffers, or provoke an error condition
@@ -625,14 +493,6 @@ static void videobuf_done(struct omap1_cam_dev *pcdev,
__func__);
pcdev->active = pcdev->ready;
- if (pcdev->vb_mode == OMAP1_CAM_DMA_SG) {
- /*
- * In SG mode, we have to make sure that the buffer we
- * are putting back into the pcdev->ready is marked
- * fresh.
- */
- buf->sgbuf = NULL;
- }
pcdev->ready = buf;
buf = pcdev->active;
@@ -640,29 +500,13 @@ static void videobuf_done(struct omap1_cam_dev *pcdev,
/*
* No next buffer has been entered into
* the DMA programming register set on time.
+ * the DMA engine has already been reinitialized
+ * with the current buffer. Best we can do
+ * is not touching it.
*/
- if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
- /*
- * In CONTIG mode, the DMA engine has already been
- * reinitialized with the current buffer. Best we can do
- * is not touching it.
- */
- dev_dbg(dev,
- "%s: nobody waiting on videobuf, reuse it\n",
- __func__);
- } else {
- /*
- * In SG mode, the DMA engine has just been
- * autoreinitialized with the last sgbuf from the
- * current list. Restart capture in order to transfer
- * next frame start into the first sgbuf, not the last
- * one.
- */
- if (result != VIDEOBUF_ERROR) {
- suspend_capture(pcdev);
- result = VIDEOBUF_ERROR;
- }
- }
+ dev_dbg(dev,
+ "%s: nobody waiting on videobuf, reuse it\n",
+ __func__);
}
if (!buf) {
@@ -671,43 +515,23 @@ static void videobuf_done(struct omap1_cam_dev *pcdev,
return;
}
- if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
- /*
- * In CONTIG mode, the current buffer parameters had already
- * been entered into the DMA programming register set while the
- * buffer was fetched with prepare_next_vb(), they may have also
- * been transferred into the runtime set and already active if
- * the DMA still running.
- */
- } else {
- /* In SG mode, extra steps are required */
- if (result == VIDEOBUF_ERROR)
- /* make sure we (re)use sglist from start on error */
- buf->sgbuf = NULL;
-
- /*
- * In any case, enter the next sgbuf parameters into the DMA
- * programming register set. They will be used either during
- * nearest DMA autoreinitialization or, in case of an error,
- * on DMA startup below.
- */
- try_next_sgbuf(pcdev->dma_ch, buf);
- }
+ /*
+ * the current buffer parameters had already
+ * been entered into the DMA programming register set while the
+ * buffer was fetched with prepare_next_vb(), they may have also
+ * been transferred into the runtime set and already active if
+ * the DMA still running.
+ */
if (result == VIDEOBUF_ERROR) {
dev_dbg(dev, "%s: videobuf error; reset FIFO, restart DMA\n",
__func__);
start_capture(pcdev);
- /*
- * In SG mode, the above also resulted in the next sgbuf
- * parameters being entered into the DMA programming register
- * set, making them ready for next DMA autoreinitialization.
- */
}
/*
* Finally, try fetching next buffer.
- * In CONTIG mode, it will also enter it into the DMA programming
+ * That will also enter it into the DMA programming
* register set, making it ready for next DMA autoreinitialization.
*/
prepare_next_vb(pcdev);
@@ -727,59 +551,15 @@ static void dma_isr(int channel, unsigned short status, void *data)
goto out;
}
- if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
- /*
- * In CONTIG mode, assume we have just managed to collect the
- * whole frame, hopefully before our end of frame watchdog is
- * triggered. Then, all we have to do is disabling the watchdog
- * for this frame, and calling videobuf_done() with success
- * indicated.
- */
- CAM_WRITE(pcdev, MODE,
- CAM_READ_CACHE(pcdev, MODE) & ~EN_V_DOWN);
- videobuf_done(pcdev, VIDEOBUF_DONE);
- } else {
- /*
- * In SG mode, we have to process every sgbuf from the current
- * sglist, one after another.
- */
- if (buf->sgbuf) {
- /*
- * Current sglist not completed yet, try fetching next
- * sgbuf, hopefully putting it into the DMA programming
- * register set, making it ready for next DMA
- * autoreinitialization.
- */
- try_next_sgbuf(pcdev->dma_ch, buf);
- if (buf->sgbuf)
- goto out;
-
- /*
- * No more sgbufs left in the current sglist. This
- * doesn't mean that the whole videobuffer is already
- * complete, but only that the last sgbuf from the
- * current sglist is about to be filled. It will be
- * ready on next DMA interrupt, signalled with the
- * buf->sgbuf set back to NULL.
- */
- if (buf->result != VIDEOBUF_ERROR) {
- /*
- * Video frame collected without errors so far,
- * we can prepare for collecting a next one
- * as soon as DMA gets autoreinitialized
- * after the current (last) sgbuf is completed.
- */
- buf = prepare_next_vb(pcdev);
- if (!buf)
- goto out;
-
- try_next_sgbuf(pcdev->dma_ch, buf);
- goto out;
- }
- }
- /* end of videobuf */
- videobuf_done(pcdev, buf->result);
- }
+ /*
+ * Assume we have just managed to collect the
+ * whole frame, hopefully before our end of frame watchdog is
+ * triggered. Then, all we have to do is disabling the watchdog
+ * for this frame, and calling videobuf_done() with success
+ * indicated.
+ */
+ CAM_WRITE(pcdev, MODE, CAM_READ_CACHE(pcdev, MODE) & ~EN_V_DOWN);
+ videobuf_done(pcdev, VIDEOBUF_DONE);
out:
spin_unlock_irqrestore(&pcdev->lock, flags);
@@ -811,46 +591,23 @@ static irqreturn_t cam_isr(int irq, void *data)
dev_warn(dev, "%s: FIFO overflow\n", __func__);
} else if (it_status & V_DOWN) {
- /* end of video frame watchdog */
- if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
- /*
- * In CONTIG mode, the watchdog is disabled with
- * successful DMA end of block interrupt, and reenabled
- * on next frame start. If we get here, there is nothing
- * to check, we must be out of sync.
- */
- } else {
- if (buf->sgcount == 2) {
- /*
- * If exactly 2 sgbufs from the next sglist have
- * been programmed into the DMA engine (the
- * first one already transferred into the DMA
- * runtime register set, the second one still
- * in the programming set), then we are in sync.
- */
- goto out;
- }
- }
+ /* End of video frame watchdog
+ * the watchdog is disabled with
+ * successful DMA end of block interrupt, and reenabled
+ * on next frame start. If we get here, there is nothing
+ * to check, we must be out of sync.
+ */
dev_notice(dev, "%s: unexpected end of video frame\n",
__func__);
} else if (it_status & V_UP) {
u32 mode;
- if (pcdev->vb_mode == OMAP1_CAM_DMA_CONTIG) {
- /*
- * In CONTIG mode, we need this interrupt every frame
- * in oredr to reenable our end of frame watchdog.
- */
- mode = CAM_READ_CACHE(pcdev, MODE);
- } else {
- /*
- * In SG mode, the below enabled end of frame watchdog
- * is kept on permanently, so we can turn this one shot
- * setup off.
- */
- mode = CAM_READ_CACHE(pcdev, MODE) & ~EN_V_UP;
- }
+ /*
+ * In CONTIG mode, we need this interrupt every frame
+ * in oredr to reenable our end of frame watchdog.
+ */
+ mode = CAM_READ_CACHE(pcdev, MODE);
if (!(mode & EN_V_DOWN)) {
/* (re)enable end of frame watchdog interrupt */
@@ -1125,28 +882,26 @@ static int omap1_cam_get_formats(struct soc_camera_device *icd,
return formats;
}
-static bool is_dma_aligned(s32 bytes_per_line, unsigned int height,
- enum omap1_cam_vb_mode vb_mode)
+static bool is_dma_aligned(s32 bytes_per_line, unsigned int height)
{
int size = bytes_per_line * height;
return IS_ALIGNED(bytes_per_line, DMA_ELEMENT_SIZE) &&
- IS_ALIGNED(size, DMA_FRAME_SIZE(vb_mode) * DMA_ELEMENT_SIZE);
+ IS_ALIGNED(size, DMA_FRAME_SIZE * DMA_ELEMENT_SIZE);
}
static int dma_align(int *width, int *height,
- const struct soc_mbus_pixelfmt *fmt,
- enum omap1_cam_vb_mode vb_mode, bool enlarge)
+ const struct soc_mbus_pixelfmt *fmt, bool enlarge)
{
s32 bytes_per_line = soc_mbus_bytes_per_line(*width, fmt);
if (bytes_per_line < 0)
return bytes_per_line;
- if (!is_dma_aligned(bytes_per_line, *height, vb_mode)) {
+ if (!is_dma_aligned(bytes_per_line, *height)) {
unsigned int pxalign = __fls(bytes_per_line / *width);
- unsigned int salign = DMA_FRAME_SHIFT(vb_mode) +
- DMA_ELEMENT_SHIFT - pxalign;
+ unsigned int salign = DMA_FRAME_SHIFT + DMA_ELEMENT_SHIFT
+ - pxalign;
unsigned int incr = enlarge << salign;
v4l_bound_align_image(width, 1, *width + incr, 0,
@@ -1207,7 +962,7 @@ static int set_format(struct omap1_cam_dev *pcdev, struct device *dev,
return bytes_per_line;
}
- if (!is_dma_aligned(bytes_per_line, mf->height, pcdev->vb_mode)) {
+ if (!is_dma_aligned(bytes_per_line, mf->height)) {
dev_err(dev, "%s: resulting geometry %ux%u not DMA aligned\n",
__func__, mf->width, mf->height);
return -EINVAL;
@@ -1243,8 +998,7 @@ static int omap1_cam_set_crop(struct soc_camera_device *icd,
return ret;
}
- ret = dma_align(&mf->width, &mf->height, xlate->host_fmt, pcdev->vb_mode,
- false);
+ ret = dma_align(&mf->width, &mf->height, xlate->host_fmt, false);
if (ret < 0) {
dev_err(dev, "%s: failed to align %ux%u %s with DMA\n",
__func__, mf->width, mf->height,
@@ -1295,8 +1049,7 @@ static int omap1_cam_set_fmt(struct soc_camera_device *icd,
mf->colorspace = pix->colorspace;
mf->code = xlate->code;
- ret = dma_align(&mf->width, &mf->height, xlate->host_fmt, pcdev->vb_mode,
- true);
+ ret = dma_align(&mf->width, &mf->height, xlate->host_fmt, true);
if (ret < 0) {
dev_err(dev, "%s: failed to align %ux%u %s with DMA\n",
__func__, pix->width, pix->height,
@@ -1359,59 +1112,18 @@ static int omap1_cam_try_fmt(struct soc_camera_device *icd,
return 0;
}
-static bool sg_mode;
-
-/*
- * Local mmap_mapper wrapper,
- * used for detecting videobuf-dma-contig buffer allocation failures
- * and switching to videobuf-dma-sg automatically for future attempts.
- */
-static int omap1_cam_mmap_mapper(struct videobuf_queue *q,
- struct videobuf_buffer *buf,
- struct vm_area_struct *vma)
-{
- struct soc_camera_device *icd = q->priv_data;
- struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
- struct omap1_cam_dev *pcdev = ici->priv;
- int ret;
-
- ret = pcdev->mmap_mapper(q, buf, vma);
-
- if (ret == -ENOMEM)
- sg_mode = true;
-
- return ret;
-}
-
static void omap1_cam_init_videobuf(struct videobuf_queue *q,
struct soc_camera_device *icd)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct omap1_cam_dev *pcdev = ici->priv;
- if (!sg_mode)
- videobuf_queue_dma_contig_init(q, &omap1_videobuf_ops,
- icd->parent, &pcdev->lock,
- V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
- sizeof(struct omap1_cam_buf), icd, &ici->host_lock);
- else
- videobuf_queue_sg_init(q, &omap1_videobuf_ops,
- icd->parent, &pcdev->lock,
- V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
- sizeof(struct omap1_cam_buf), icd, &ici->host_lock);
-
- /* use videobuf mode (auto)selected with the module parameter */
- pcdev->vb_mode = sg_mode ? OMAP1_CAM_DMA_SG : OMAP1_CAM_DMA_CONTIG;
-
- /*
- * Ensure we substitute the videobuf-dma-contig version of the
- * mmap_mapper() callback with our own wrapper, used for switching
- * automatically to videobuf-dma-sg on buffer allocation failure.
- */
- if (!sg_mode && q->int_ops->mmap_mapper != omap1_cam_mmap_mapper) {
- pcdev->mmap_mapper = q->int_ops->mmap_mapper;
- q->int_ops->mmap_mapper = omap1_cam_mmap_mapper;
- }
+ videobuf_queue_dma_contig_init(q, &omap1_videobuf_ops,
+ icd->parent, &pcdev->lock,
+ V4L2_BUF_TYPE_VIDEO_CAPTURE,
+ V4L2_FIELD_NONE,
+ sizeof(struct omap1_cam_buf),
+ icd, &ici->host_lock);
}
static int omap1_cam_reqbufs(struct soc_camera_device *icd,
@@ -1692,9 +1404,6 @@ static struct platform_driver omap1_cam_driver = {
module_platform_driver(omap1_cam_driver);
-module_param(sg_mode, bool, 0644);
-MODULE_PARM_DESC(sg_mode, "videobuf mode, 0: dma-contig (default), 1: dma-sg");
-
MODULE_DESCRIPTION("OMAP1 Camera Interface driver");
MODULE_AUTHOR("Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>");
MODULE_LICENSE("GPL v2");
diff --git a/include/linux/platform_data/media/omap1_camera.h b/include/linux/platform_data/media/omap1_camera.h
index 819767c..f059328 100644
--- a/include/linux/platform_data/media/omap1_camera.h
+++ b/include/linux/platform_data/media/omap1_camera.h
@@ -13,15 +13,6 @@
#include <linux/bitops.h>
-#define OMAP1_CAMERA_IOSIZE 0x1c
-
-enum omap1_cam_vb_mode {
- OMAP1_CAM_DMA_CONTIG = 0,
- OMAP1_CAM_DMA_SG,
-};
-
-#define OMAP1_CAMERA_MIN_BUF_COUNT(x) ((x) == OMAP1_CAM_DMA_CONTIG ? 3 : 2)
-
struct omap1_cam_platform_data {
unsigned long camexclk_khz;
unsigned long lclk_khz_max;
--
2.7.3