Re: [tpmdd-devel] [PATCH 3/3] tpm, tpm_crb: runtime power management

From: Jarkko Sakkinen
Date: Thu Jun 16 2016 - 17:30:04 EST


On Thu, Jun 16, 2016 at 11:26:48PM +0300, Tomas Winkler wrote:
> On Thu, Jun 16, 2016 at 10:57 PM, Jarkko Sakkinen
> <jarkko.sakkinen@xxxxxxxxxxxxxxx> wrote:
> > Hi Thomas,
> >
> > I'm on a vacation this week but I'll give you quick answers :)
> >
> > On Tue, Jun 14, 2016 at 04:14:58PM +0300, Tomas Winkler wrote:
> >> On Wed, Jun 8, 2016 at 2:02 AM, Jarkko Sakkinen
> >> <jarkko.sakkinen@xxxxxxxxxxxxxxx> wrote:
> >> > The register TPM_CRB_CTRL_REQ_0 contains bits goIdle and cmdReady for
> >> > invoking the chip to suspend and resume. This commit implements runtime
> >> > PM for tpm_crb by using these bits.
> >> >
> >> > The legacy ACPI start (SMI + DMA) based devices do not support these
> >> > bits. Thus this functionality only is enabled only for CRB start (MMIO)
> >> > based devices.
> >> >
> >> > Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@xxxxxxxxxxxxxxx>
> >> > ---
> >> > drivers/char/tpm/tpm-interface.c | 3 ++
> >> > drivers/char/tpm/tpm_crb.c | 62 ++++++++++++++++++++++++++++++++++++++--
> >> > 2 files changed, 63 insertions(+), 2 deletions(-)
> >> >
> >> > diff --git a/drivers/char/tpm/tpm-interface.c b/drivers/char/tpm/tpm-interface.c
> >> > index 5e3c1b6..3b85648 100644
> >> > --- a/drivers/char/tpm/tpm-interface.c
> >> > +++ b/drivers/char/tpm/tpm-interface.c
> >> > @@ -29,6 +29,7 @@
> >> > #include <linux/mutex.h>
> >> > #include <linux/spinlock.h>
> >> > #include <linux/freezer.h>
> >> > +#include <linux/pm_runtime.h>
> >> >
> >> > #include "tpm.h"
> >> > #include "tpm_eventlog.h"
> >> > @@ -350,6 +351,7 @@ ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
> >> > return -E2BIG;
> >> > }
> >> >
> >> > + pm_runtime_get_sync(chip->dev.parent);
> >> > mutex_lock(&chip->tpm_mutex);
> >> >
> >> > rc = chip->ops->send(chip, (u8 *) buf, count);
> >> > @@ -394,6 +396,7 @@ out_recv:
> >> > "tpm_transmit: tpm_recv: error %zd\n", rc);
> >> > out:
> >> > mutex_unlock(&chip->tpm_mutex);
> >> > + pm_runtime_put_sync(chip->dev.parent);
> >> > return rc;
> >> > }
> >> >
> >> > diff --git a/drivers/char/tpm/tpm_crb.c b/drivers/char/tpm/tpm_crb.c
> >> > index ca2cad9..71cc7cd 100644
> >> > --- a/drivers/char/tpm/tpm_crb.c
> >> > +++ b/drivers/char/tpm/tpm_crb.c
> >> > @@ -20,6 +20,7 @@
> >> > #include <linux/rculist.h>
> >> > #include <linux/module.h>
> >> > #include <linux/platform_device.h>
> >> > +#include <linux/pm_runtime.h>
> >> > #include "tpm.h"
> >> >
> >> > #define ACPI_SIG_TPM2 "TPM2"
> >> > @@ -41,7 +42,6 @@ enum crb_ca_request {
> >> >
> >> > enum crb_ca_status {
> >> > CRB_CA_STS_ERROR = BIT(0),
> >> > - CRB_CA_STS_TPM_IDLE = BIT(1),
> >> > };
> >> >
> >> > enum crb_start {
> >> > @@ -68,6 +68,8 @@ struct crb_control_area {
> >> >
> >> > enum crb_status {
> >> > CRB_STS_COMPLETE = BIT(0),
> >> > + CRB_STS_READY = BIT(1),
> >> > + CRB_STS_IDLE = BIT(2),
> >> > };
> >> >
> >> > enum crb_flags {
> >> > @@ -81,9 +83,52 @@ struct crb_priv {
> >> > struct crb_control_area __iomem *cca;
> >> > u8 __iomem *cmd;
> >> > u8 __iomem *rsp;
> >> > + wait_queue_head_t idle_queue;
> >>
> >>
> >> I'm failing to find the code that is calling wake_up_interruptible(idle_queue);
> >
> > Ugh, my bad. This actually should not be declared at all. Will remove it
> > from the next version and NULL should be passed to wait_for_tpm_stat()
> > as the driver does not yet support interrupts (Haswell did not have
> > them, not sure about later gens).
> >
> >
> >> > };
> >> >
> >> > -static SIMPLE_DEV_PM_OPS(crb_pm, tpm_pm_suspend, tpm_pm_resume);
> >> > +static int __maybe_unused crb_runtime_suspend(struct device *dev)
> >> > +{
> >> > + struct tpm_chip *chip = dev_get_drvdata(dev);
> >> > + struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> >> > + u32 req;
> >> > +
> >> > + if (priv->flags & CRB_FL_ACPI_START)
> >> > + return 0;
> >> > +
> >> > + req = ioread32(&priv->cca->req);
> >> > +
> >> > + iowrite32(cpu_to_le32(req | CRB_CA_REQ_GO_IDLE), &priv->cca->req);
> >> > +
> >> > + if (wait_for_tpm_stat(chip, CRB_STS_IDLE, chip->timeout_c,
> >> > + &priv->idle_queue, false))
> >> > + dev_warn(&chip->dev, "idle timed out\n");
> >>
> >> Unfortunately you cannot do that as there is an HW errata, the status
> >> register value might not be defined here during power transition
> >> You should poll for request CRB_CA_REQ_GO_IDLE goes to 0 as descried
> >> in the spec . only after that you can check for the status register
> >> (thought it's maybe not needed)
> >
> > And I do exactly what you are asking me to do.
> >
> >> > +
> >> > + return 0;
> >> > +}
> >> > +
> >> > +static int __maybe_unused crb_runtime_resume(struct device *dev)
> >>
> >> why this is marked unused, why just not compile it out? if the
> >> CONFIG_PM is not set?
> >
> > It is compiled out if it is unused. Why would you want to trash the code
> > with #ifdef cages if they are not necessary? I can add /* CONFIG_PM */
> > before the function if that makes it cleaner.
>
> I'm not sure about that, I believe it just suppresses warnings.
> You will need something --gc-sessions int the linker, I'm not sure
> this is used by kernel.

It is used in lot of places. git grep gave me 1482 matches.

> >> > +{
> >> > + struct tpm_chip *chip = dev_get_drvdata(dev);
> >> > + struct crb_priv *priv = dev_get_drvdata(&chip->dev);
> >> > + u32 req;
> >> > +
> >> > + if (priv->flags & CRB_FL_ACPI_START)
> >> > + return 0;
> >> > +
> >> > + req = ioread32(&priv->cca->req);
> >> > + iowrite32(cpu_to_le32(req | CRB_CA_REQ_CMD_READY), &priv->cca->req);
> >> > +
> >> > + if (wait_for_tpm_stat(chip, CRB_STS_READY, chip->timeout_c,
> >> > + &priv->idle_queue, false))
> >> > + dev_warn(&chip->dev, "wake timed out\n");
> >>
> >> Same here, you should wait for CRB_CA_REQ_CMD_READ to get cleared,
> >> only after that it is safe to check the status register.
> >
> > It does exactly that. I'm not using CRB status register for anything.
> >
> >> > +
> >> > + return 0;
> >> > +}
> >> > +
> >> > +static const struct dev_pm_ops crb_pm = {
> >> > + SET_RUNTIME_PM_OPS(crb_runtime_suspend, crb_runtime_resume, NULL)
> >> > + SET_SYSTEM_SLEEP_PM_OPS(tpm_pm_suspend, tpm_pm_resume)
> >> > +};
> >> >
> >> > static u8 crb_status(struct tpm_chip *chip)
> >> > {
> >> > @@ -94,6 +139,14 @@ static u8 crb_status(struct tpm_chip *chip)
> >> > CRB_START_INVOKE)
> >> > sts |= CRB_STS_COMPLETE;
> >> >
> >> > + if ((ioread32(&priv->cca->req) & CRB_CA_REQ_CMD_READY) !=
> >> > + CRB_CA_REQ_CMD_READY)
> >> > + sts |= CRB_STS_READY;
> >>
> >> There is meaning for checking this w/o the actual transition i.e.
> >> setting the before
> >
> > I'm not sure what you are trying to say.
>
> Sorry, my bad, it should be: There is NO meaning for checking
> CRB_CA_REQ_CMD_READY is 0 if this wasn't asserted before, In
> interrupt language it's not edge sensitive not level sensitive

Got you but it should work because I take advatange of this in the case
I first set it. Anyway, this approach that I chose is crap and I'll
revise the whole patch in a way that I explained in my follow-up reply
:)

> Tomas

/Jarkko