[PATCH 04/16] arm64: dts: msm8996: add support blsp2_uart2

[Srinivas Kandagatla]

This patch adds bslp2_uart2 node in soc so that boards that use this
uart can enable it.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 22b770f..a1605f7 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -161,6 +161,16 @@
 			status = "disabled";
 		};
 
+		blsp2_uart2: serial@75b1000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x075b1000 0x1000>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		msmgpio: pinctrl@1010000 {
 			compatible = "qcom,msm8996-pinctrl";
 			reg = <0x01010000 0x300000>;
-- 
2.7.4