Re: [PATCH v2 0/3] firmware: scpi: add device power domain support

[Sudeep Holla]

On 17/06/16 16:22, Mathieu Poirier wrote:
> On 16 June 2016 at 04:37, Sudeep Holla <sudeep.holla@xxxxxxx> wrote:
> > This series add support for SCPI based device device power state
> > management using genpd.
> >
> > Regards,
> > Sudeep
> >
> > v1[1]->v2:
> >          - Fixed the endianness handling in scpi_device_get_power_state
> >            as spotted by Tixy
> >          - Renamed scpi_pd.c to scpi_pm_domain.c as suggested by Ulf
> >          - Added Mark's ack on DT binding
> >
> > [1] https://marc.info/?l=linux-kernel&m=146522850003483&w=2
> >
> > Sudeep Holla (3):
> >    firmware: arm_scpi: add support for device power state management
> >    Documentation: add DT bindings for ARM SCPI power domains
> >    firmware: scpi: add device power domain support using genpd
> >
> >   Documentation/devicetree/bindings/arm/arm,scpi.txt |  34 +++++
> >   drivers/firmware/Kconfig                           |   9 ++
> >   drivers/firmware/Makefile                          |   1 +
> >   drivers/firmware/arm_scpi.c                        |  30 ++++
> >   drivers/firmware/scpi_pm_domain.c                  | 152 +++++++++++++++++++++
> >   include/linux/scpi_protocol.h                      |   2 +
> >   6 files changed, 228 insertions(+)
> >   create mode 100644 drivers/firmware/scpi_pm_domain.c
> >
> > --
> > 2.7.4
>
> For the set:
>
> Tested-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>

Thanks for testing.

--
Regards,
Sudeep