Re: [PATCH] vb2: V4L2_BUF_FLAG_DONE is set after DQBUF
From: Ricardo Ribalda Delgado
Date: Mon Jun 20 2016 - 06:12:40 EST
Good catch :)
I will prepare the new version. Btw, can I also merge
vb2_internal_dqbuf and vb2_dqbuf in one function? Seems a bit
overkilled that split.
Regarding v42l_compliance... I can take care of that if you dare :)
Best regards!
On Mon, Jun 20, 2016 at 11:53 AM, Hans Verkuil <hverkuil@xxxxxxxxx> wrote:
> On 06/20/2016 11:01 AM, Ricardo Ribalda Delgado wrote:
>> According to the doc, V4L2_BUF_FLAG_DONE is cleared after DQBUF:
>>
>> V4L2_BUF_FLAG_DONE 0x00000004 ... After calling the VIDIOC_QBUF or
>> VIDIOC_DQBUF it is always cleared ...
>>
>> Unfortunately, it seems that videobuf2 keeps it set after DQBUF. This
>> can be tested with vivid and dev_debug:
>>
>> [257604.338082] video1: VIDIOC_DQBUF: 71:33:25.00260479 index=3,
>> type=vid-cap, flags=0x00002004, field=none, sequence=163,
>> memory=userptr, bytesused=460800, offset/userptr=0x344b000,
>> length=460800
>>
>> This patch changes the order when fill_user_buffer() is called,
>> to follow the documentation.
>>
>> Reported-by: Dimitrios Katsaros <patcherwork@xxxxxxxxx>
>> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
>
> Sorry, this won't work. Calling __vb2_dqbuf will overwrite the state
> VB2_BUF_STATE_ERROR and so the V4L2_BUF_FLAG_ERROR flag will never be
> set. The same is true for the last 'if' in the __fill_v4l2_buffer()
> function.
>
> I think it might be better to keep this code and instead change the
> vb2_internal_dqbuf function to just clear the DONE flag after calling
> vb2_core_dqbuf.
>
> It would be nice to have a v4l2_compliance check for this as well.
>
> Regards,
>
> Hans
>
>> ---
>> drivers/media/v4l2-core/videobuf2-core.c | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c
>> index 633fc1ab1d7a..63981f28075e 100644
>> --- a/drivers/media/v4l2-core/videobuf2-core.c
>> +++ b/drivers/media/v4l2-core/videobuf2-core.c
>> @@ -1771,10 +1771,6 @@ int vb2_core_dqbuf(struct vb2_queue *q, unsigned int *pindex, void *pb,
>> if (pindex)
>> *pindex = vb->index;
>>
>> - /* Fill buffer information for the userspace */
>> - if (pb)
>> - call_void_bufop(q, fill_user_buffer, vb, pb);
>> -
>> /* Remove from videobuf queue */
>> list_del(&vb->queued_entry);
>> q->queued_count--;
>> @@ -1784,6 +1780,10 @@ int vb2_core_dqbuf(struct vb2_queue *q, unsigned int *pindex, void *pb,
>> /* go back to dequeued state */
>> __vb2_dqbuf(vb);
>>
>> + /* Fill buffer information for the userspace */
>> + if (pb)
>> + call_void_bufop(q, fill_user_buffer, vb, pb);
>> +
>> dprintk(1, "dqbuf of buffer %d, with state %d\n",
>> vb->index, vb->state);
>>
>>
--
Ricardo Ribalda