[PATCH v2 3/3] mtd: nand: add a pairing field to nand_flash_dev

[Boris Brezillon]

Add a new field to attach a pairing scheme to a NAND chip definition
and assign it to mtd->pairing when a full-id match is detected.

Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
---
 drivers/mtd/nand/nand_base.c | 1 +
 include/linux/mtd/nand.h     | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index dc30e3c5c032..920b0b31ff71 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3791,6 +3791,7 @@ static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
 		mtd->writesize = type->pagesize;
 		mtd->erasesize = type->erasesize;
 		mtd->oobsize = type->oobsize;
+		mtd_set_pairing_scheme(mtd, type->pairing);
 
 		chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
 		chip->chipsize = (uint64_t)type->chipsize << 20;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 874b2671af90..685b26efcf82 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -855,6 +855,7 @@ static inline void nand_set_controller_data(struct nand_chip *chip, void *priv)
  * @onfi_timing_mode_default: the default ONFI timing mode entered after a NAND
  *			      reset. Should be deduced from timings described
  *			      in the datasheet.
+ * @pairing: The page pairing scheme used by this NAND, if any.
  *
  */
 struct nand_flash_dev {
@@ -877,6 +878,7 @@ struct nand_flash_dev {
 		uint16_t step_ds;
 	} ecc;
 	int onfi_timing_mode_default;
+	const struct mtd_pairing_scheme *pairing;
 };
 
 /**
-- 
2.7.4