[PATCH] ASoC: dwc: make pcm support built-in when necessary

[Arnd Bergmann]

The new PIO mode for the dwc audio driver causes a link failure
when it is built as a loadable module but the audio driver is built-in:

sound/built-in.o: In function `i2s_irq_handler':
:(.text+0x58c64): undefined reference to `dw_pcm_push_tx'
sound/built-in.o: In function `dw_i2s_probe':
:(.text+0x593dc): undefined reference to `dw_pcm_register'

We could link both into a single module, but apparently the
author intended them to be separate, so this instead changes
the Makefile to force the pcm module to be built-in if the
base module is. This is a bit hacky but not as bad as trying
to work around it in Kconfig language.

Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
Fixes: 79361b2b98b7 ("ASoC: dwc: Add PIO PCM extension")
---
 sound/soc/dwc/Makefile | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/sound/soc/dwc/Makefile b/sound/soc/dwc/Makefile
index 1b48bcccbc51..38f1ca31c5fa 100644
--- a/sound/soc/dwc/Makefile
+++ b/sound/soc/dwc/Makefile
@@ -1,4 +1,5 @@
 # SYNOPSYS Platform Support
 obj-$(CONFIG_SND_DESIGNWARE_I2S) += designware_i2s.o
-obj-$(CONFIG_SND_DESIGNWARE_PCM) += designware_pcm.o
-
+ifdef CONFIG_SND_DESIGNWARE_PCM
+obj-$(CONFIG_SND_DESIGNWARE_I2S) += designware_pcm.o
+endif
-- 
2.9.0