[PATCH v4 0/2] Add support for SYSCON reset
From: Andrew F. Davis
Date: Mon Jun 20 2016 - 15:14:14 EST
Some SoCs contain reset controls for modules that are memory-mapped to
areas shared with other module configuration settings. This requires
synchronization across all drivers accessing this memory area. This
series adds a generic SYSCON reset driver to allow resets toggled
by bits in memory-mapped registers through SYSCON.
Changes from v3:
- Add depends on HAS_IOMEM to Kconfig
- Re-worked naming to be more TI specific for now
- Changed DT binding to Philipp's suggestion
Changes from v2:
- Rebased on v4.7-rc1
- Removed the need to give reset specifier nodes an index address
Changes from v1:
- Reset control information is now described in the reset node, this
keeps the reset information centralized for easy verification
- Other small fixups
Andrew F. Davis (2):
Documentation: dt: reset: Add TI syscon reset binding
reset: add TI SYSCON based reset driver
.../devicetree/bindings/reset/ti-syscon-reset.txt | 83 +++++++
drivers/reset/Kconfig | 11 +
drivers/reset/Makefile | 1 +
drivers/reset/reset-ti-syscon.c | 260 +++++++++++++++++++++
include/dt-bindings/reset/ti-syscon.h | 30 +++
5 files changed, 385 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/ti-syscon-reset.txt
create mode 100644 drivers/reset/reset-ti-syscon.c
create mode 100644 include/dt-bindings/reset/ti-syscon.h
--
2.9.0