Re: [RFC PATCH v3 2/2] ARM64/PCI: Start using quirks handling for ACPI based PCI host controller
From: Duc Dang
Date: Tue Jun 21 2016 - 04:43:12 EST
On Mon, Jun 20, 2016 at 12:12 PM, Duc Dang <dhdang@xxxxxxx> wrote:
> On Mon, Jun 20, 2016 at 10:17 AM, Christopher Covington
> <cov@xxxxxxxxxxxxxx> wrote:
>> Hi Duc,
>>
>> On 06/20/2016 05:42 AM, Lorenzo Pieralisi wrote:
>>> On Fri, Jun 17, 2016 at 02:37:02PM -0700, Duc Dang wrote:
>>>> On Thu, Jun 16, 2016 at 10:48 AM, Lorenzo Pieralisi
>>>> <lorenzo.pieralisi@xxxxxxx> wrote:
>>>>> On Wed, Jun 15, 2016 at 11:34:11AM -0400, Christopher Covington wrote:
>>>>>> From: Tomasz Nowicki <tn@xxxxxxxxxxxx>
>>>>>>
>>>>>> pci_generic_ecam_ops is used by default. Since there are platforms
>>>>>> which have non-compliant ECAM space we need to overwrite these
>>>>>> accessors prior to PCI buses enumeration. In order to do that
>>>>>> we call pci_mcfg_get_ops to retrieve pci_ecam_ops structure so that
>>>>>> we can use proper PCI config space accessors and bus_shift.
>>>>>>
>>>>>> pci_generic_ecam_ops is still used for platforms free from quirks.
>>>>>>
>>>>>> Signed-off-by: Tomasz Nowicki <tn@xxxxxxxxxxxx>
>>>>>> ---
>>>>>> arch/arm64/kernel/pci.c | 7 ++++---
>>>>>> 1 file changed, 4 insertions(+), 3 deletions(-)
>>>>>>
>>>>>> diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
>>>>>> index 94cd43c..a891bda 100644
>>>>>> --- a/arch/arm64/kernel/pci.c
>>>>>> +++ b/arch/arm64/kernel/pci.c
>>>>>> @@ -139,6 +139,7 @@ pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
>>>>>> struct pci_config_window *cfg;
>>>>>> struct resource cfgres;
>>>>>> unsigned int bsz;
>>>>>> + struct pci_ecam_ops *ops;
>>>>>>
>>>>>> /* Use address from _CBA if present, otherwise lookup MCFG */
>>>>>> if (!root->mcfg_addr)
>>>>>> @@ -150,12 +151,12 @@ pci_acpi_setup_ecam_mapping(struct acpi_pci_root *root)
>>>>>> return NULL;
>>>>>> }
>>>>>>
>>>>>> - bsz = 1 << pci_generic_ecam_ops.bus_shift;
>>>>>> + ops = pci_mcfg_get_ops(root);
>>>>>> + bsz = 1 << ops->bus_shift;
>>>>>> cfgres.start = root->mcfg_addr + bus_res->start * bsz;
>>>>>> cfgres.end = cfgres.start + resource_size(bus_res) * bsz - 1;
>>>>>> cfgres.flags = IORESOURCE_MEM;
>>>>>> - cfg = pci_ecam_create(&root->device->dev, &cfgres, bus_res,
>>>>>> - &pci_generic_ecam_ops);
>>>>>> + cfg = pci_ecam_create(&root->device->dev, &cfgres, bus_res, ops);
>>>>>
>>>>> Arnd pointed this out already, I think that's the only pending question
>>>>> here.
>>>>>
>>>>> pci_ecam_create() maps ECAM space for config regions retrieved from
>>>>> the MCFG, which are *supposed* to be ECAM compliant.
>>>>>
>>>>> Do we think that's *always* correct/safe regardless of the kind
>>>>> of quirk we are currently fixing up ?
>>>>>
>>>>> Or we do think that configuration space regions should come from
>>>>> a different resource declared in the ACPI namespace if the regions
>>>>> are not MCFG/ECAM compliant (ie config space is not defined through
>>>>> MCFG at all - possibly through a _CRS method for a vendor specific
>>>>> _HID under the PNP0A03 node ?)
>>>>
>>>> Hi Lorenzo,
>>>>
>>>> For X-Gene: the ECAM space is used to access the configuration space
>>>> of PCIe devices, with additional help from controller register to
>>>> specify the bus, device and function number. Below is the RFC patch
>>>> that implements ECAM fixup for X-Gene PCIe controller on top of this
>>>> RFC ECAM quirk v3 for your and others reference.
>>>
>>> Yes, you have an additional resource in the PNP0A03 _CRS to describe
>>> your register that is a deliberate abuse of the ACPI standard in
>>> that the _CRS is meant to describe resources that are passed on
>>> to secondary buses
>>
>> A potential alternative came up in an off-list discussion: Would it be
>> better to hard code the information in the quirk workaround than look it
>> up from a repurposed ACPI resource?
>
> Hi Chris, Lorenzo,
>
> Thanks for looking into this.
>
> Yes, I am open for this approach and I think it may work. I can
> + check the pci_config_window resource start address (cfg->res.start)
> to figure out the controller and then get the fixed controller
> register address
> or
> + using the domain number to identify the controller.
Hi Chris, Lorenzo,
I reworked the patch to use fix-ed controller address. Please let me know
if you have further comment/concern.
---
[PATCH 1/1] pci: xgene: ECAM fix-up code for X-Gene PCIe
X-Gene PCIe controller does not fully support ECAM.
This patch adds required ECAM fixup to allow X-Gene
PCIe controller to be functional in ACPI boot mode.
Signed-off-by: Duc Dang <dhdang@xxxxxxx>
---
v2 changes:
- Using ECAM base address to identify fixed controller address
drivers/pci/host/Makefile | 2 +-
drivers/pci/host/pci-xgene-ecam.c | 291 ++++++++++++++++++++++++++++++++++++++
2 files changed, 292 insertions(+), 1 deletion(-)
create mode 100644 drivers/pci/host/pci-xgene-ecam.c
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 9c8698e..3480696 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -14,7 +14,7 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
-obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
+obj-$(CONFIG_PCI_XGENE) += pci-xgene.o pci-xgene-ecam.o
obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
diff --git a/drivers/pci/host/pci-xgene-ecam.c
b/drivers/pci/host/pci-xgene-ecam.c
new file mode 100644
index 0000000..87d2dcf
--- /dev/null
+++ b/drivers/pci/host/pci-xgene-ecam.c
@@ -0,0 +1,291 @@
+/*
+ * APM X-Gene PCIe ECAM fixup driver
+ *
+ * Copyright (c) 2016, Applied Micro Circuits Corporation
+ * Author:
+ * Duc Dang <dhdang@xxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/platform_device.h>
+#include <linux/pci-ecam.h>
+
+#ifdef CONFIG_ACPI
+#define RTDID 0x160
+#define ROOT_CAP_AND_CTRL 0x5C
+
+/* PCIe IP version */
+#define XGENE_PCIE_IP_VER_UNKN 0
+#define XGENE_PCIE_IP_VER_1 1
+#define XGENE_PCIE_IP_VER_2 2
+
+#define XGENE_CSR_LENGTH 0x10000
+
+struct xgene_pcie_acpi_root {
+ void __iomem *csr_base;
+ u32 version;
+};
+
+static int xgene_v1_pcie_ecam_init(struct pci_config_window *cfg)
+{
+ struct xgene_pcie_acpi_root *xgene_root;
+ struct device *dev = cfg->parent;
+ u32 csr_base;
+
+ xgene_root = devm_kzalloc(dev, sizeof(*xgene_root), GFP_KERNEL);
+ if (!xgene_root)
+ return -ENOMEM;
+
+ switch (cfg->res.start) {
+ case 0xE0D0000000ULL:
+ csr_base = 0x1F2B0000;
+ break;
+ case 0xD0D0000000ULL:
+ csr_base = 0x1F2C0000;
+ break;
+ case 0x90D0000000ULL:
+ csr_base = 0x1F2D0000;
+ break;
+ case 0xA0D0000000ULL:
+ csr_base = 0x1F500000;
+ break;
+ case 0xC0D0000000ULL:
+ csr_base = 0x1F510000;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ xgene_root->csr_base = ioremap(csr_base, XGENE_CSR_LENGTH);
+ if (!xgene_root->csr_base) {
+ kfree(xgene_root);
+ return -ENODEV;
+ }
+
+ xgene_root->version = XGENE_PCIE_IP_VER_1;
+
+ cfg->priv = xgene_root;
+
+ return 0;
+}
+
+static int xgene_v2_1_pcie_ecam_init(struct pci_config_window *cfg)
+{
+ struct xgene_pcie_acpi_root *xgene_root;
+ struct device *dev = cfg->parent;
+ resource_size_t csr_base;
+
+ xgene_root = devm_kzalloc(dev, sizeof(*xgene_root), GFP_KERNEL);
+ if (!xgene_root)
+ return -ENOMEM;
+
+ switch (cfg->res.start) {
+ case 0xC0D0000000ULL:
+ csr_base = 0x1F2B0000;
+ break;
+ case 0xA0D0000000ULL:
+ csr_base = 0x1F2C0000;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ xgene_root->csr_base = ioremap(csr_base, XGENE_CSR_LENGTH);
+ if (!xgene_root->csr_base) {
+ kfree(xgene_root);
+ return -ENODEV;
+ }
+
+ xgene_root->version = XGENE_PCIE_IP_VER_2;
+
+ cfg->priv = xgene_root;
+
+ return 0;
+}
+
+static int xgene_v2_2_pcie_ecam_init(struct pci_config_window *cfg)
+{
+ struct xgene_pcie_acpi_root *xgene_root;
+ struct device *dev = cfg->parent;
+ resource_size_t csr_base;
+
+ xgene_root = devm_kzalloc(dev, sizeof(*xgene_root), GFP_KERNEL);
+ if (!xgene_root)
+ return -ENOMEM;
+
+ switch (cfg->res.start) {
+ case 0xE0D0000000ULL:
+ csr_base = 0x1F2B0000;
+ break;
+ case 0xA0D0000000ULL:
+ csr_base = 0x1F500000;
+ break;
+ case 0x90D0000000ULL:
+ csr_base = 0x1F2D0000;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ xgene_root->csr_base = ioremap(csr_base, XGENE_CSR_LENGTH);
+ if (!xgene_root->csr_base) {
+ kfree(xgene_root);
+ return -ENODEV;
+ }
+
+ xgene_root->version = XGENE_PCIE_IP_VER_2;
+
+ cfg->priv = xgene_root;
+
+ return 0;
+}
+/*
+ * For Configuration request, RTDID register is used as Bus Number,
+ * Device Number and Function number of the header fields.
+ */
+static void xgene_pcie_set_rtdid_reg(struct pci_bus *bus, uint devfn)
+{
+ struct pci_config_window *cfg = bus->sysdata;
+ struct xgene_pcie_acpi_root *port = cfg->priv;
+ unsigned int b, d, f;
+ u32 rtdid_val = 0;
+
+ b = bus->number;
+ d = PCI_SLOT(devfn);
+ f = PCI_FUNC(devfn);
+
+ if (!pci_is_root_bus(bus))
+ rtdid_val = (b << 8) | (d << 3) | f;
+
+ writel(rtdid_val, port->csr_base + RTDID);
+ /* read the register back to ensure flush */
+ readl(port->csr_base + RTDID);
+}
+
+/*
+ * X-Gene PCIe port uses BAR0-BAR1 of RC's configuration space as
+ * the translation from PCI bus to native BUS. Entire DDR region
+ * is mapped into PCIe space using these registers, so it can be
+ * reached by DMA from EP devices. The BAR0/1 of bridge should be
+ * hidden during enumeration to avoid the sizing and resource allocation
+ * by PCIe core.
+ */
+static bool xgene_pcie_hide_rc_bars(struct pci_bus *bus, int offset)
+{
+ if (pci_is_root_bus(bus) && ((offset == PCI_BASE_ADDRESS_0) ||
+ (offset == PCI_BASE_ADDRESS_1)))
+ return true;
+
+ return false;
+}
+
+void __iomem *xgene_pcie_ecam_map_bus(struct pci_bus *bus,
+ unsigned int devfn, int where)
+{
+ struct pci_config_window *cfg = bus->sysdata;
+ unsigned int busn = bus->number;
+ void __iomem *base;
+
+ if (busn < cfg->busr.start || busn > cfg->busr.end)
+ return NULL;
+
+ if ((pci_is_root_bus(bus) && devfn != 0) ||
+ xgene_pcie_hide_rc_bars(bus, where))
+ return NULL;
+
+ xgene_pcie_set_rtdid_reg(bus, devfn);
+
+ if (busn > cfg->busr.start)
+ base = cfg->win + (1 << cfg->ops->bus_shift);
+ else
+ base = cfg->win;
+
+ return base + where;
+}
+
+static int xgene_pcie_config_read32(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 *val)
+{
+ struct pci_config_window *cfg = bus->sysdata;
+ struct xgene_pcie_acpi_root *port = cfg->priv;
+
+ if (pci_generic_config_read32(bus, devfn, where & ~0x3, 4, val) !=
+ PCIBIOS_SUCCESSFUL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * The v1 controller has a bug in its Configuration Request
+ * Retry Status (CRS) logic: when CRS is enabled and we read the
+ * Vendor and Device ID of a non-existent device, the controller
+ * fabricates return data of 0xFFFF0001 ("device exists but is not
+ * ready") instead of 0xFFFFFFFF ("device does not exist"). This
+ * causes the PCI core to retry the read until it times out.
+ * Avoid this by not claiming to support CRS.
+ */
+ if (pci_is_root_bus(bus) && (port->version == XGENE_PCIE_IP_VER_1) &&
+ ((where & ~0x3) == ROOT_CAP_AND_CTRL))
+ *val &= ~(PCI_EXP_RTCAP_CRSVIS << 16);
+
+ if (size <= 2)
+ *val = (*val >> (8 * (where & 3))) & ((1 << (size * 8)) - 1);
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ecam_ops xgene_v1_pcie_ecam_ops = {
+ .bus_shift = 16,
+ .init = xgene_v1_pcie_ecam_init,
+ .pci_ops = {
+ .map_bus = xgene_pcie_ecam_map_bus,
+ .read = xgene_pcie_config_read32,
+ .write = pci_generic_config_write,
+ }
+};
+
+DECLARE_ACPI_MCFG_FIXUP(&xgene_v1_pcie_ecam_ops, "APM", "XGENE", 0x2,
+ PCI_MCFG_DOMAIN_ANY, PCI_MCFG_BUS_ANY);
+DECLARE_ACPI_MCFG_FIXUP(&xgene_v1_pcie_ecam_ops, "APM", "XGENE", 0x1,
+ PCI_MCFG_DOMAIN_ANY, PCI_MCFG_BUS_ANY);
+
+static struct pci_ecam_ops xgene_v2_1_pcie_ecam_ops = {
+ .bus_shift = 16,
+ .init = xgene_v2_1_pcie_ecam_init,
+ .pci_ops = {
+ .map_bus = xgene_pcie_ecam_map_bus,
+ .read = xgene_pcie_config_read32,
+ .write = pci_generic_config_write,
+ }
+};
+
+DECLARE_ACPI_MCFG_FIXUP(&xgene_v2_1_pcie_ecam_ops, "APM", "XGENE2", 0x1,
+ PCI_MCFG_DOMAIN_ANY, PCI_MCFG_BUS_ANY);
+
+static struct pci_ecam_ops xgene_v2_2_pcie_ecam_ops = {
+ .bus_shift = 16,
+ .init = xgene_v2_2_pcie_ecam_init,
+ .pci_ops = {
+ .map_bus = xgene_pcie_ecam_map_bus,
+ .read = xgene_pcie_config_read32,
+ .write = pci_generic_config_write,
+ }
+};
+
+DECLARE_ACPI_MCFG_FIXUP(&xgene_v2_2_pcie_ecam_ops, "APM", "XGENE2", 0x2,
+ PCI_MCFG_DOMAIN_ANY, PCI_MCFG_BUS_ANY);
+#endif
--
1.9.1
>>
>> Supporting quirk workarounds for early, non-compliant hardware is
>> helpful and perhaps necessary for bootstrapping the ecosystem in a
>> timely manner. But we don't really want to provide an expandable or
>> reusable interface that would make it easy for new hardware to remain
>> non-compliant.
>>
>> Regards,
>> Cov
>>
>> --
>> Qualcomm Innovation Center, Inc.
>> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
>> a Linux Foundation Collaborative Project
Regards,
Duc Dang.