On 06/20/2016 01:01 PM, Srinivas Kandagatla wrote:I agree, Will fix this in next version.
This patch adds apq8096 db820c basic support with serial port.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 2 +-
arch/arm64/boot/dts/qcom/apq8096-db820c.dts | 21 +++++++++++++++++
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 34 ++++++++++++++++++++++++++++
3 files changed, 56 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c.dts
create mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index fa1f661..80ecdfe 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,5 +1,5 @@
dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb msm8916-mtp.dtb
-dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb apq8096-db820c.dtb
We should do a new line for each board as other arm64 vendors have done?
I agree, this should match up with the dtbTool. I have been manually patching up dtb to include the board-id, pmic id stuff.
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dts b/arch/arm64/boot/dts/qcom/apq8096-db820c.dts
new file mode 100644 >> +/dts-v1/;
+
+#include "apq8096-db820c.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. DB820c";
+ compatible = "qcom,apq8096-db820c";
Should be qcom,apq8096-sbc? At least I have to use that on my board to
match the board ids.