[PATCH] ARM: BCM5301X: Set GPIO enabling USB power on Netgear R7000

[RafaÅ MiÅecki]

There is one GPIO controlling power for both USB ports.

Signed-off-by: RafaÅ MiÅecki <zajec5@xxxxxxxxx>
---
 arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
index a22ed14..a76486b 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -104,3 +104,11 @@
 &uart0 {
 	status = "okay";
 };
+
+&usb2 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
-- 
1.8.4.5