[PATCH v5 5/7] max8903: removes non zero validity checks on gpios.
From: Chris Lapa
Date: Thu Jun 23 2016 - 22:26:49 EST
From: Chris Lapa <chris@xxxxxxxxxxx>
Prior to this commit a zero gpio was treated as invalid. Whereas
gpio_is_valid() will treat a zero gpio as valid.
This commit removes the confusion and explicitly uses gpio_is_valid()
throughout. Which in turn results in several of the error messages becoming
redundant and thus removed.
Signed-off-by: Chris Lapa <chris@xxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
---
drivers/power/max8903_charger.c | 115 ++++++++++++++++------------------------
1 file changed, 47 insertions(+), 68 deletions(-)
diff --git a/drivers/power/max8903_charger.c b/drivers/power/max8903_charger.c
index 3f35593..643a87a 100644
--- a/drivers/power/max8903_charger.c
+++ b/drivers/power/max8903_charger.c
@@ -53,7 +53,7 @@ static int max8903_get_property(struct power_supply *psy,
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
- if (data->pdata->chg) {
+ if (gpio_is_valid(data->pdata->chg)) {
if (gpio_get_value(data->pdata->chg) == 0)
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else if (data->usb_in || data->ta_in)
@@ -93,11 +93,11 @@ static irqreturn_t max8903_dcin(int irq, void *_data)
data->ta_in = ta_in;
/* Set Current-Limit-Mode 1:DC 0:USB */
- if (pdata->dcm)
+ if (gpio_is_valid(pdata->dcm))
gpio_set_value(pdata->dcm, ta_in ? 1 : 0);
/* Charger Enable / Disable (cen is negated) */
- if (pdata->cen)
+ if (gpio_is_valid(pdata->cen))
gpio_set_value(pdata->cen, ta_in ? 0 :
(data->usb_in ? 0 : 1));
@@ -136,7 +136,7 @@ static irqreturn_t max8903_usbin(int irq, void *_data)
/* Do not touch Current-Limit-Mode */
/* Charger Enable / Disable (cen is negated) */
- if (pdata->cen)
+ if (gpio_is_valid(pdata->cen))
gpio_set_value(pdata->cen, usb_in ? 0 :
(data->ta_in ? 0 : 1));
@@ -190,7 +190,7 @@ static int max8903_setup_gpios(struct platform_device *pdev)
int usb_in = 0;
if (pdata->dc_valid) {
- if (pdata->dok && gpio_is_valid(pdata->dok)) {
+ if (gpio_is_valid(pdata->dok)) {
ret = devm_gpio_request(dev, pdata->dok,
data->psy_desc.name);
if (ret) {
@@ -208,27 +208,21 @@ static int max8903_setup_gpios(struct platform_device *pdev)
}
}
- if (pdata->dcm) {
- if (gpio_is_valid(pdata->dcm)) {
- ret = devm_gpio_request(dev, pdata->dcm,
- data->psy_desc.name);
- if (ret) {
- dev_err(dev,
- "Failed GPIO request for dcm: %d err %d\n",
- pdata->dcm, ret);
- return ret;
- }
-
- gpio = pdata->dcm; /* Output */
- gpio_set_value(gpio, ta_in);
- } else {
- dev_err(dev, "Invalid pin: dcm.\n");
- return -EINVAL;
+ if (gpio_is_valid(pdata->dcm)) {
+ ret = devm_gpio_request(dev, pdata->dcm, data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for dcm: %d err %d\n",
+ pdata->dcm, ret);
+ return ret;
}
+
+ gpio = pdata->dcm; /* Output */
+ gpio_set_value(gpio, ta_in);
}
if (pdata->usb_valid) {
- if (pdata->uok && gpio_is_valid(pdata->uok)) {
+ if (gpio_is_valid(pdata->uok)) {
ret = devm_gpio_request(dev, pdata->uok,
data->psy_desc.name);
if (ret) {
@@ -247,60 +241,45 @@ static int max8903_setup_gpios(struct platform_device *pdev)
}
}
- if (pdata->cen) {
- if (gpio_is_valid(pdata->cen)) {
- ret = devm_gpio_request(dev, pdata->cen,
- data->psy_desc.name);
- if (ret) {
- dev_err(dev,
- "Failed GPIO request for cen: %d err %d\n",
- pdata->cen, ret);
- return ret;
- }
-
- gpio_set_value(pdata->cen, (ta_in || usb_in) ? 0 : 1);
- } else {
- dev_err(dev, "Invalid pin: cen.\n");
- return -EINVAL;
+ if (gpio_is_valid(pdata->cen)) {
+ ret = devm_gpio_request(dev, pdata->cen, data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for cen: %d err %d\n",
+ pdata->cen, ret);
+ return ret;
}
+
+ gpio_set_value(pdata->cen, (ta_in || usb_in) ? 0 : 1);
}
- if (pdata->chg) {
- if (gpio_is_valid(pdata->chg)) {
- ret = devm_gpio_request(dev, pdata->chg,
- data->psy_desc.name);
- if (ret) {
- dev_err(dev,
- "Failed GPIO request for chg: %d err %d\n",
- pdata->chg, ret);
- return ret;
- }
+ if (gpio_is_valid(pdata->chg)) {
+ ret = devm_gpio_request(dev, pdata->chg, data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for chg: %d err %d\n",
+ pdata->chg, ret);
+ return ret;
}
}
- if (pdata->flt) {
- if (gpio_is_valid(pdata->flt)) {
- ret = devm_gpio_request(dev, pdata->flt,
- data->psy_desc.name);
- if (ret) {
- dev_err(dev,
- "Failed GPIO request for flt: %d err %d\n",
- pdata->flt, ret);
- return ret;
- }
+ if (gpio_is_valid(pdata->flt)) {
+ ret = devm_gpio_request(dev, pdata->flt, data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for flt: %d err %d\n",
+ pdata->flt, ret);
+ return ret;
}
}
- if (pdata->usus) {
- if (gpio_is_valid(pdata->usus)) {
- ret = devm_gpio_request(dev, pdata->usus,
- data->psy_desc.name);
- if (ret) {
- dev_err(dev,
- "Failed GPIO request for usus: %d err %d\n",
- pdata->usus, ret);
- return ret;
- }
+ if (gpio_is_valid(pdata->usus)) {
+ ret = devm_gpio_request(dev, pdata->usus, data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for usus: %d err %d\n",
+ pdata->usus, ret);
+ return ret;
}
}
@@ -385,7 +364,7 @@ static int max8903_probe(struct platform_device *pdev)
}
}
- if (pdata->flt) {
+ if (gpio_is_valid(pdata->flt)) {
ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->flt),
NULL, max8903_fault,
IRQF_TRIGGER_FALLING |
--
1.9.1