Re: [PATCH 01/14] ARM: dts: sun8i: Add SID node
From: Chen-Yu Tsai
Date: Thu Jun 23 2016 - 22:42:13 EST
On Fri, Jun 24, 2016 at 3:20 AM, <megous@xxxxxxxxxx> wrote:
> From: Josef Gajdusek <atx@xxxxxxxx>
>
> Add a node describing the Security ID memory to the Allwinner H3 .dtsi file.
>
> Signed-off-by: Josef Gajdusek <atx@xxxxxxxx>
> ---
> arch/arm/boot/dts/sun8i-h3.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> index 4a4926b..172576d 100644
> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> @@ -389,6 +389,13 @@
> #size-cells = <0>;
> };
>
> + sid: eeprom@01c14000 {
> + compatible = "allwinner,sun4i-a10-sid";
This has been discussed before. The hardware is not compatible.
The write control registers are at different offsets.
ChenYu
> + reg = <0x01c14000 0x400>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> +
> usbphy: phy@01c19400 {
> compatible = "allwinner,sun8i-h3-usb-phy";
> reg = <0x01c19400 0x2c>,
> --
> 2.9.0
>