Re: [PATCH v6] leds: documentation: 'ide-disk' to 'disk-activity'

From: Jacek Anaszewski
Date: Mon Jun 27 2016 - 03:04:23 EST


Hi Stephan,

On 06/24/2016 07:16 PM, Stephan Linz wrote:
Cc: Joseph Jezak <josejx@xxxxxxxxxx>
Cc: JÃrg Sommer <joerg@xxxxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Signed-off-by: Stephan Linz <linz@xxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
---
Changes in v6:
- Reorganize v5.

Changes in v5:
- Keep documentation for the old 'ide-disk' device tree
binding, but mark as deprecated and refer to the new
trigger 'disk-activity'.

Changes in v4:
- Keep the 'ide-disk' trigger and add a second one
for 'disk-activity'.

Changes in v3:
- Port to kernel 4.x
- Split into platform independent and dependent parts.

v2: https://patchwork.ozlabs.org/patch/117485/
v1: http://dev.gentoo.org/~josejx/ata.patch
---
Documentation/devicetree/bindings/leds/common.txt | 4 +++-
Documentation/devicetree/bindings/leds/leds-gpio.txt | 4 ++--
Documentation/laptops/asus-laptop.txt | 2 +-
Documentation/leds/leds-class.txt | 2 +-
4 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
index af10678..93ef6e6 100644
--- a/Documentation/devicetree/bindings/leds/common.txt
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -26,7 +26,9 @@ Optional properties for child nodes:
"default-on" - LED will turn on (but for leds-gpio see "default-state"
property in Documentation/devicetree/bindings/gpio/led.txt)
"heartbeat" - LED "double" flashes at a load average based rate
- "ide-disk" - LED indicates disk activity
+ "disk-activity" - LED indicates disk activity
+ "ide-disk" - LED indicates IDE disk activity (deprecated),
+ in new implementations use "disk-activity"
"timer" - LED flashes at a fixed, configurable rate

- led-max-microamp : Maximum LED supply current in microamperes. This property
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.txt b/Documentation/devicetree/bindings/leds/leds-gpio.txt
index cbbeb18..5b1b43a 100644
--- a/Documentation/devicetree/bindings/leds/leds-gpio.txt
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.txt
@@ -33,9 +33,9 @@ Examples:
leds {
compatible = "gpio-leds";
hdd {
- label = "IDE Activity";
+ label = "Disk Activity";
gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "ide-disk";
+ linux,default-trigger = "disk-activity";
};

fault {
diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt
index 79a1bc6..5f28587 100644
--- a/Documentation/laptops/asus-laptop.txt
+++ b/Documentation/laptops/asus-laptop.txt
@@ -72,7 +72,7 @@ LEDs
echo 1 > /sys/class/leds/asus::mail/brightness
will switch the mail LED on.
You can also know if they are on/off by reading their content and use
- kernel triggers like ide-disk or heartbeat.
+ kernel triggers like disk-activity or heartbeat.

Backlight
---------
diff --git a/Documentation/leds/leds-class.txt b/Documentation/leds/leds-class.txt
index 44f5e6b..f1f7ec9 100644
--- a/Documentation/leds/leds-class.txt
+++ b/Documentation/leds/leds-class.txt
@@ -11,7 +11,7 @@ brightness support so will just be turned on for non-zero brightness settings.
The class also introduces the optional concept of an LED trigger. A trigger
is a kernel based source of led events. Triggers can either be simple or
complex. A simple trigger isn't configurable and is designed to slot into
-existing subsystems with minimal additional code. Examples are the ide-disk,
+existing subsystems with minimal additional code. Examples are the disk-activity,
nand-disk and sharpsl-charge triggers. With led triggers disabled, the code
optimises away.



Applied, thanks.

--
Best regards,
Jacek Anaszewski