Re: [PATCH 1/1] drivers:iio:light:isl29125: added macros for sensing range

[Peter Meerwald-Stadler]

> On 24/06/16 12:16, Bijosh Thykkoottathil wrote:
> > Added macros for sensing range as the corresponding magic numbers
> > were used at multiple places.
> >    - SENSING_RANGE_0 for 375 lux full range
> >    - SENSING_RANGE_1 for 10k lux full range

> Macros are great for making cases of 'magic numbers' more readable.
> However here we are wrapping up 'real' numbers in macros that actually
> obscure what they are...
> 
> Now the fact they are used twice does make it a little more worthwhile.
> Peter, what do you think?  Your driver so up to you ;)

I'm fine with the proposed change, but a proper prefix is required, hence
ISL29125_SENSING_RANGE_0 and _1

regards, p.

> > ---
> >  drivers/iio/light/isl29125.c | 11 +++++++----
> >  1 file changed, 7 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/iio/light/isl29125.c b/drivers/iio/light/isl29125.c
> > index e2945a2..83a5a7a 100644
> > --- a/drivers/iio/light/isl29125.c
> > +++ b/drivers/iio/light/isl29125.c
> > @@ -44,6 +44,9 @@
> >  #define ISL29125_MODE_B 0x3
> >  #define ISL29125_MODE_RGB 0x5
> >  
> > +#define SENSING_RANGE_0 5722   /* 375 lux full range */
> > +#define SENSING_RANGE_1 152590 /* 10k lux full range */
> > +
> >  #define ISL29125_MODE_RANGE BIT(3)
> >  
> >  #define ISL29125_STATUS_CONV BIT(1)
> > @@ -140,9 +143,9 @@ static int isl29125_read_raw(struct iio_dev *indio_dev,
> >  	case IIO_CHAN_INFO_SCALE:
> >  		*val = 0;
> >  		if (data->conf1 & ISL29125_MODE_RANGE)
> > -			*val2 = 152590; /* 10k lux full range */
> > +			*val2 = SENSING_RANGE_1; /* 10k lux full range */
> >  		else
> > -			*val2 = 5722; /* 375 lux full range */
> > +			*val2 = SENSING_RANGE_0; /* 375 lux full range */
> >  		return IIO_VAL_INT_PLUS_MICRO;
> >  	}
> >  	return -EINVAL;
> > @@ -158,9 +161,9 @@ static int isl29125_write_raw(struct iio_dev *indio_dev,
> >  	case IIO_CHAN_INFO_SCALE:
> >  		if (val != 0)
> >  			return -EINVAL;
> > -		if (val2 == 152590)
> > +		if (val2 == SENSING_RANGE_1)
> >  			data->conf1 |= ISL29125_MODE_RANGE;
> > -		else if (val2 == 5722)
> > +		else if (val2 == SENSING_RANGE_0)
> >  			data->conf1 &= ~ISL29125_MODE_RANGE;
> >  		else
> >  			return -EINVAL;
> > 
> 

-- 

Peter Meerwald-Stadler
+43-664-2444418 (mobile)