[PATCH 0/2] arm: dts: syscon based reboot in DT
From: Jon Mason
Date: Tue Jun 28 2016 - 18:10:50 EST
Splitting off the bcm5301x reset device tree changes from the patch
series (originally sent on http://lists.infradead.org/pipermail/linux-arm-kernel/2015-December/395155.html
and resent on https://lkml.org/lkml/2016/5/11/953) and adding a
Northstar Plus reset device tree change.
I'd like to get Arnd's ack/nack on these, as I am uncertain if I am
doing the correct thing based on the last email from him. Per my
comment in the original email thread:
The CRU (Clock and Reset Unit) starts at 0x1800c100, with the
following layout:
CRU Clock Management at 0x1800c100-0x1800c180
CRU Reset at 0x1800c184
CRU Period Sample Clock at 0x1800c188
CRU Interrupt register at 0x1800c18c
CRU MDIO Control at 0x1800c190
CRU GPIO at 0x1800c1c0-0x1800c1e0
CRU SDIO 0x1800c200-0x1800c214
CRU RoboSW Interrupt at 0x1800c280
CRU Straps Control at 0x1800c2a0
The clock driver is already referencing the registers between
0x1800c100-0x1800c180, and the GPIO driver is referencing registers
between 0x1800c1c0-0x1800c1e0.
The reset part of the syscon seems to be the only useful thing in this
block.
So, are these patches acceptable given those constrains or am I better
off doing a reset driver that is more or less identical to
syscon-reboot?
Thanks,
Jon
Jon Mason (2):
arm: dts: bcm5301x: Add syscon based reboot in DT
arm: dts: nsp: Add syscon based reboot in DT
arch/arm/boot/dts/bcm-nsp.dtsi | 12 ++++++++++++
arch/arm/boot/dts/bcm5301x.dtsi | 12 ++++++++++++
2 files changed, 24 insertions(+)
--
1.9.1