Re: [PATCH 0/3] add support for Allwinner SoCs ADC
From: Chen-Yu Tsai
Date: Tue Jun 28 2016 - 23:28:36 EST
Hi,
On Tue, Jun 28, 2016 at 4:45 PM, Quentin Schulz
<quentin.schulz@xxxxxxxxxxxxxxxxxx> wrote:
> The Allwinner SoCs all have an ADC that can also act as a touchscreen controller
> and a thermal sensor. The first four channels can be used either for the ADC or
> the touchscreen and the fifth channel is used for the thermal sensor. We
> currently have a driver for the two latter functions in
> drivers/input/touchscreen/sun4i-ts.c but we don't have access to the ADC feature
> at all.
>
> This adds initial support for Allwinner SoCs ADC with all features. Yet, the
> touchscreen is not implemented but will be added later. To switch between
> touchscreen and ADC modes, you need to poke few bits in registers and
> (de)activate an interrupt (pen-up).
> A MFD is provided to let the input driver activate the pen-up interrupt through
> virtual interrupt, poke few bits via regmap and read data from the ADC driver
> while both (and iio_hwmon) are probed by the MFD.
I take it that we are going to replace the original sun4i-ts driver
with this new mfd one, and various sub device drivers?
> There exists slight modifications between the different SoCs ADC like the
> address of some registers and the scale and offset to apply to thermal sensor
> raw values. These modifications are done by drivers on different
> platform_device_id passed by the MFD when probing subdrivers.
>
> This also modifies iio-hwmon to allow probe deferring when no iio channel is
> found. Currently when no iio channel is found, the probing of iio-hwmon fails.
> This is problematic when iio-hwmon probes before the iio driver could register
> iio channels to share.
One thing about iio-hwmon is that it doesn't support hwmon labels.
Any chance you could improve this, so we see the same names in userspace?
Thanks
ChenYu
>
> Quentin Schulz (3):
> mfd: add support for Allwinner SoCs ADC
> iio: adc: add support for Allwinner SoCs ADC
> hwmon: iio_hwmon: defer probe when no channel is found
>
> drivers/hwmon/iio_hwmon.c | 5 +-
> drivers/iio/adc/Kconfig | 12 ++
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/sunxi-gpadc-iio.c | 371 ++++++++++++++++++++++++++++++++++++
> drivers/mfd/Kconfig | 14 ++
> drivers/mfd/Makefile | 2 +
> drivers/mfd/sunxi-gpadc-mfd.c | 188 ++++++++++++++++++
> include/linux/mfd/sunxi-gpadc-mfd.h | 14 ++
> 8 files changed, 606 insertions(+), 1 deletion(-)
> create mode 100644 drivers/iio/adc/sunxi-gpadc-iio.c
> create mode 100644 drivers/mfd/sunxi-gpadc-mfd.c
> create mode 100644 include/linux/mfd/sunxi-gpadc-mfd.h
>
> --
> 2.5.0
>