Re: [PATCH v5 0/5] regulator: add Ricoh RN5T567 PMIC support

[Lee Jones]

On Tue, 28 Jun 2016, Stefan Agner wrote:

> This patchset adds RN5T567 PMIC support which is used on the 
> Toradex Colibri iMX7S/iMX7D modules. The existing RN5T618 is from
> the same family, hence this patchset uses the same driver and adds
> variant support.
> 
> The Colibris currently do not use the PMIC's power off capabilities,
> as do the current users of that PMIC driver. Therefore this patchset
> also makes the use of the system-power-controller property mandatory
> if the power off capabilties are required.
> 
> Changes since v4:
> - Spell check in patch 5 and added Acks
> 
> Changes since v3:
> - Use RN5T618_REPCNT_REPWRON macro when writing RN5T618_REPCNT register
> 
> Changes since v2:
> - Elevate restart priority to 192 to make sure PMIC takes presedence
>   over SoC level restart capabilities (e.g. watchdog)
> - Print a warning if poweroff callback is already assigned
> - Reorder of_id and variant assignment
> - Lower delay to 1ms and justify why it is required
> - Fix DCDC count and a typos in device tree bindings
> 
> Changes since v1:
> - Removed obsolete include <asm/system_misc.h>
> 
> Stefan Agner (5):
>   ARM: dts: meson: minix-neo-x8: define PMIC as power controller
>   mfd: add Ricoh RN5T567 PMIC support
>   regulator: rn5t618: add RN5T567 PMIC support
>   mfd: rn5t618: register power off callback optionally
>   mfd: rn5t618: register restart handler
> 
>  Documentation/devicetree/bindings/mfd/rn5t618.txt | 19 +++---
>  arch/arm/boot/dts/meson8-minix-neo-x8.dts         |  1 +
>  drivers/mfd/Kconfig                               |  7 ++-
>  drivers/mfd/rn5t618.c                             | 70 +++++++++++++++++++----
>  drivers/regulator/Kconfig                         |  5 +-
>  drivers/regulator/rn5t618-regulator.c             | 40 +++++++++++--
>  include/linux/mfd/rn5t618.h                       | 13 +++++
>  7 files changed, 126 insertions(+), 29 deletions(-)

Looks like you have all your Acks now.  How do you want to play this?
Would you like me to take the set through MFD and provide the other
Maintainers with a branch to pull from, or did you have other ideas?

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog