Re: [RESEND PATCH 3/8] clk: core: support clocks which requires parents on (part 1)
From: Dong Aisheng
Date: Wed Jun 29 2016 - 10:04:34 EST
On Fri, Jun 24, 2016 at 04:52:42PM -0700, Michael Turquette wrote:
> Quoting Dong Aisheng (2016-04-20 02:34:35)
> > On Freescale i.MX7D platform, all clocks operations, including
> > enable/disable, rate change and re-parent, requires its parent
> > clock on. Current clock core can not support it well.
> > This patch introduce a new flag CLK_OPS_PARENT_ON to handle this
> > special case in clock core that enable its parent clock firstly for
> > each operation and disable it later after operation complete.
> >
> > The patch part 1 fixes the possible disabling clocks while its parent
> > is off during kernel booting phase in clk_disable_unused_subtree().
> >
> > Before the completion of kernel booting, clock tree is still not built
> > completely, there may be a case that the child clock is on but its
> > parent is off which could be caused by either HW initial reset state
> > or bootloader initialization.
> >
> > Taking bootloader as an example, we may enable all clocks in HW by default.
> > And during kernel booting time, the parent clock could be disabled in its
> > driver probe due to calling clk_prepare_enable and clk_disable_unprepare.
> > Because it's child clock is only enabled in HW while its SW usecount
> > in clock tree is still 0, so clk_disable of parent clock will gate
> > the parent clock in both HW and SW usecount ultimately. Then there will
> > be a child clock is still on in HW but its parent is already off.
> >
> > Later in clk_disable_unused(), this clock disable accessing while its
> > parent off will cause system hang due to the limitation of HW which
> > must require its parent on.
> >
> > This patch simply enables the parent clock first before disabling
> > if flag CLK_OPS_PARENT_ON is set in clk_disable_unused_subtree().
> > This is a simple solution and only affects booting time.
> >
> > After kernel booting up the clock tree is already created, there will
> > be no case that child is off but its parent is off.
> > So no need do this checking for normal clk_disable() later.
> >
> > Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
> > Cc: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
> > Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
> > Signed-off-by: Dong Aisheng <aisheng.dong@xxxxxxx>
> > ---
> > drivers/clk/clk.c | 5 +++++
> > include/linux/clk-provider.h | 2 ++
> > 2 files changed, 7 insertions(+)
> >
> > diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> > index 9f944d4..1f054d1a 100644
> > --- a/drivers/clk/clk.c
> > +++ b/drivers/clk/clk.c
> > @@ -765,6 +765,9 @@ static void clk_disable_unused_subtree(struct clk_core *core)
> > hlist_for_each_entry(child, &core->children, child_node)
> > clk_disable_unused_subtree(child);
> >
> > + if (core->flags & CLK_OPS_PARENT_ON)
> > + clk_core_prepare_enable(core->parent);
> > +
> > flags = clk_enable_lock();
> >
> > if (core->enable_count)
> > @@ -789,6 +792,8 @@ static void clk_disable_unused_subtree(struct clk_core *core)
> >
> > unlock_out:
> > clk_enable_unlock(flags);
> > + if (core->flags & CLK_OPS_PARENT_ON)
> > + clk_core_disable_unprepare(core->parent);
> > }
> >
> > static bool clk_ignore_unused;
> > diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> > index 15628644..c878f9c 100644
> > --- a/include/linux/clk-provider.h
> > +++ b/include/linux/clk-provider.h
> > @@ -33,6 +33,8 @@
> > #define CLK_RECALC_NEW_RATES BIT(9) /* recalc rates after notifications */
> > #define CLK_SET_RATE_UNGATE BIT(10) /* clock needs to run to set rate */
> > #define CLK_IS_CRITICAL BIT(11) /* do not gate, ever */
> > +/* parents need on during gate/ungate, set rate and re-parent */
> > +#define CLK_OPS_PARENT_ON BIT(12)
>
> Hi Dong,
>
> In the clk framework we use "enabled" instead of "on". How about
> changing the flag to CLK_OPS_PARENT_ENABLE?
>
Yes, of course i'm fine with it.
I could update the patch title too.
Thanks for the review.
Regards
Dong Aisheng
> Regards,
> Mike
>
> >
> > struct clk;
> > struct clk_hw;
> > --
> > 1.9.1
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-clk" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html