Re: [PATCH v5 3/5] usb: dwc3: add phyif_utmi_quirk

From: Rob Herring
Date: Thu Jun 30 2016 - 22:36:00 EST


On Thu, Jun 30, 2016 at 07:12:54PM +0800, William Wu wrote:
> Add a quirk to configure the core to support the
> UTMI+ PHY with an 8- or 16-bit interface. UTMI+ PHY
> interface is hardware property, and it's platform
> dependent. Normall, the PHYIf can be configured
> during coreconsultant. But for some specific usb
> cores(e.g. rk3399 soc dwc3), the default PHYIf
> configuration value is fault, so we need to
> reconfigure it by software.
>
> And refer to the dwc3 databook, the GUSB2PHYCFG.USBTRDTIM
> must be set to the corresponding value according to
> the UTMI+ PHY interface.
>
> Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx>
> ---
> Changes in v5:
> - None
>
> Changes in v4:
> - rebase on top of balbi testing/next, remove pdata (balbi)
>
> Changes in v3:
> - None
>
> Changes in v2:
> - add a quirk for phyif_utmi (balbi)
>
> Documentation/devicetree/bindings/usb/dwc3.txt | 4 ++++
> drivers/usb/dwc3/core.c | 19 +++++++++++++++++++
> drivers/usb/dwc3/core.h | 12 ++++++++++++
> 3 files changed, 35 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
> index 1ada121..34d13a5 100644
> --- a/Documentation/devicetree/bindings/usb/dwc3.txt
> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
> @@ -42,6 +42,10 @@ Optional properties:
> - snps,dis_u2_freeclk_exists_quirk: when set, clear the u2_freeclk_exists
> in GUSB2PHYCFG, specify that USB2 PHY doesn't provide
> a free-running PHY clock.
> + - snps,phyif_utmi_quirk: when set core will set phyif UTMI+ interface.

This isn't really what I'd call a quirk.

> + - snps,phyif_utmi: the value to configure the core to support a UTMI+ PHY
> + with an 8- or 16-bit interface. Value 0 select 8-bit
> + interface, value 1 select 16-bit interface.

These seem like they should be standard properties for setting the phy
type/mode. I think we already have something defined in fact.

Rob