[PATCH] spi: imx: wait_for_completion_timeout(..) for PIO transfers

From: Christian Gmeiner
Date: Fri Jul 01 2016 - 08:33:12 EST


In some rare cases I see the following 'task blocked' information. It
looks like the PIO transfer has some problems and never succeeds. Make
use of wait_for_completion_timeout(..) to detect this case and
return -ETIMEDOUT.

v2: remove backtrace from commit message

Signed-off-by: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
---
drivers/spi/spi-imx.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 50769078..d2b96b1 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -1050,6 +1050,8 @@ static int spi_imx_pio_transfer(struct spi_device *spi,
struct spi_transfer *transfer)
{
struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+ unsigned long transfer_timeout;
+ unsigned long timeout;

spi_imx->tx_buf = transfer->tx_buf;
spi_imx->rx_buf = transfer->rx_buf;
@@ -1062,7 +1064,15 @@ static int spi_imx_pio_transfer(struct spi_device *spi,

spi_imx->devtype_data->intctrl(spi_imx, MXC_INT_TE);

- wait_for_completion(&spi_imx->xfer_done);
+ transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
+
+ timeout = wait_for_completion_timeout(&spi_imx->xfer_done,
+ transfer_timeout);
+ if (!timeout) {
+ dev_err(&spi->dev, "I/O Error in PIO\n");
+ spi_imx->devtype_data->reset(spi_imx);
+ return -ETIMEDOUT;
+ }

return transfer->len;
}
--
2.7.4