Re: [PATCH 6/7] dt-bindings: net: bgmac: add bindings documentation for bgmac
From: Jon Mason
Date: Fri Jul 01 2016 - 10:29:43 EST
On Thu, Jun 30, 2016 at 10:56 PM, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Thu, Jun 30, 2016 at 06:59:13PM -0400, Jon Mason wrote:
>> Signed-off-by: Jon Mason <jon.mason@xxxxxxxxxxxx>
>> ---
>> .../devicetree/bindings/net/brcm,bgmac-nsp.txt | 24 ++++++++++++++++++++++
>> 1 file changed, 24 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt
>>
>> diff --git a/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt b/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt
>> new file mode 100644
>> index 0000000..022946c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt
>> @@ -0,0 +1,24 @@
>> +Broadcom GMAC Ethernet Controller Device Tree Bindings
>> +-------------------------------------------------------------
>> +
>> +Required properties:
>> + - compatible: "brcm,bgmac-nsp"
>
> Usually we do <soc>-<block> order.
Thanks, I'll make the necessary changes and push out a v2.
>
>> + - reg: Address and length of the GMAC registers,
>> + Address and length of the GMAC IDM registers
>> + - reg-names: Names of the registers. Must have both "gmac_base" and
>> + "idm_base"
>> + - interrupts: Interrupt number
>> +
>> +Optional properties:
>> +- mac-address: See ethernet.txt file in the same directory
>> +
>> +Examples:
>> +
>> +gmac0: ethernet@18022000 {
>> + compatible = "brcm,bgmac-nsp";
>> + reg = <0x18022000 0x1000>,
>> + <0x18110000 0x1000>;
>> + reg-names = "gmac_base", "idm_base";
>> + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
>> + status = "disabled";
>> +};
>> --
>> 1.9.1
>>