Re: [RFC PATCH v2 2/4] net: ethernet: xilinx: Add gmii2rgmii converter support
From: Nicolas Ferre
Date: Mon Jul 04 2016 - 05:54:28 EST
Le 04/07/2016 11:04, Kedareswara rao Appana a écrit :
> This patch adds support for gmii2rgmii converter.
>
> The GMII to RGMII IP core provides the Reduced Gigabit Media
> Independent Interface (RGMII) between Ethernet physical media
> Devices and the Gigabit Ethernet controller. This core can
> Switch dynamically between the three different speed modes of
> Operation by configuring the converter register through mdio write.
>
> MDIO interface is used to set operating speed of Ethernet MAC.
>
> Signed-off-by: Kedareswara rao Appana <appanad@xxxxxxxxxx>
> ---
> Changes for v2:
> --> Passed struct xphy pointer directly to the fix_mac_speed
> API as suggested by the Florian.
> --> Added checks for the phy-node fail case as suggested
> by the Florian.
>
> drivers/net/ethernet/xilinx/Kconfig | 8 +++
> drivers/net/ethernet/xilinx/Makefile | 1 +
> drivers/net/ethernet/xilinx/xilinx_gmii2rgmii.c | 79 +++++++++++++++++++++++++
> include/linux/xilinx_gmii2rgmii.h | 24 ++++++++
> 4 files changed, 112 insertions(+)
> create mode 100644 drivers/net/ethernet/xilinx/xilinx_gmii2rgmii.c
> create mode 100644 include/linux/xilinx_gmii2rgmii.h
>
> diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
> index 4f5c024..4b65174 100644
> --- a/drivers/net/ethernet/xilinx/Kconfig
> +++ b/drivers/net/ethernet/xilinx/Kconfig
> @@ -39,4 +39,12 @@ config XILINX_LL_TEMAC
> This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
> core used in Xilinx Spartan and Virtex FPGAs
>
> +config XILINX_GMII2RGMII
> + tristate "Xilinx GMII2RGMII converter driver"
> + default y
> + ---help---
> + This driver support xilinx GMII to RGMII IP core it provides
> + the Reduced Gigabit Media Independent Interface(RGMII) between
> + Ethernet physical media devices and the Gigabit Ethernet controller.
> +
> endif # NET_VENDOR_XILINX
> diff --git a/drivers/net/ethernet/xilinx/Makefile b/drivers/net/ethernet/xilinx/Makefile
> index 214205e..bca0da0 100644
> --- a/drivers/net/ethernet/xilinx/Makefile
> +++ b/drivers/net/ethernet/xilinx/Makefile
> @@ -7,3 +7,4 @@ obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
> obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
> xilinx_emac-objs := xilinx_axienet_main.o xilinx_axienet_mdio.o
> obj-$(CONFIG_XILINX_AXI_EMAC) += xilinx_emac.o
> +obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o
> diff --git a/drivers/net/ethernet/xilinx/xilinx_gmii2rgmii.c b/drivers/net/ethernet/xilinx/xilinx_gmii2rgmii.c
> new file mode 100644
> index 0000000..de3bd89
> --- /dev/null
> +++ b/drivers/net/ethernet/xilinx/xilinx_gmii2rgmii.c
> @@ -0,0 +1,79 @@
> +/* Xilinx GMII2RGMII Converter driver
> + *
> + * Copyright (C) 2016 Xilinx, Inc.
> + *
> + * Author: Kedareswara rao Appana <appanad@xxxxxxxxxx>
> + *
> + * Description:
> + * This driver is developed for Xilinx GMII2RGMII Converter
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/types.h>
> +#include <linux/netdevice.h>
> +#include <linux/mii.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_address.h>
> +#include <linux/of_mdio.h>
> +#include <linux/xilinx_gmii2rgmii.h>
> +
> +static void xgmii2rgmii_fix_mac_speed(struct gmii2rgmii *xphy,
> + unsigned int speed)
> +{
> + struct phy_device *gmii2rgmii_phydev = xphy->gmii2rgmii_phy_dev;
> + u16 gmii2rgmii_reg = 0;
> +
> + switch (speed) {
> + case 1000:
> + gmii2rgmii_reg |= XILINX_GMII2RGMII_SPEED1000;
> + break;
> + case 100:
> + gmii2rgmii_reg |= XILINX_GMII2RGMII_SPEED100;
> + break;
> + default:
> + return;
> + }
> +
> + xphy->mdio_write(xphy->mii_bus, gmii2rgmii_phydev->mdio.addr,
> + XILINX_GMII2RGMII_REG_NUM,
> + gmii2rgmii_reg);
> +}
> +
> +int gmii2rgmii_phyprobe(struct gmii2rgmii *xphy)
> +{
> + struct device_node *phy_node;
> + struct phy_device *phydev;
> + struct device_node *np = (struct device_node *)xphy->platform_data;
> +
> + phy_node = of_parse_phandle(np, "gmii2rgmii-phy-handle", 0);
> + if (phy_node) {
> + phydev = of_phy_attach(xphy->dev, phy_node, 0, 0);
> + if (!phydev) {
> + netdev_err(xphy->dev,
> + "%s: no gmii to rgmii converter found\n",
> + xphy->dev->name);
> + return -1;
> + }
> + xphy->gmii2rgmii_phy_dev = phydev;
> + xphy->fix_mac_speed = xgmii2rgmii_fix_mac_speed;
> + } else {
> + xphy->gmii2rgmii_phy_dev = 0;
> + xphy->fix_mac_speed = 0;
> + }
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(gmii2rgmii_phyprobe);
> +
> +MODULE_DESCRIPTION("Xilinx GMII2RGMII converter driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/xilinx_gmii2rgmii.h b/include/linux/xilinx_gmii2rgmii.h
> new file mode 100644
> index 0000000..b328ee7
> --- /dev/null
> +++ b/include/linux/xilinx_gmii2rgmii.h
> @@ -0,0 +1,24 @@
Here, header of the file seems needed.
> +#ifndef _GMII2RGMII_H
> +#define _GMII2RGMII_H
> +
> +#include <linux/of.h>
> +#include <linux/phy.h>
> +#include <linux/mii.h>
> +
> +#define XILINX_GMII2RGMII_FULLDPLX BMCR_FULLDPLX
> +#define XILINX_GMII2RGMII_SPEED1000 BMCR_SPEED1000
> +#define XILINX_GMII2RGMII_SPEED100 BMCR_SPEED100
> +#define XILINX_GMII2RGMII_REG_NUM 0x10
> +
> +struct gmii2rgmii {
> + struct net_device *dev;
> + struct mii_bus *mii_bus;
> + struct phy_device *gmii2rgmii_phy_dev;
> + void *platform_data;
> + int (*mdio_write)(struct mii_bus *bus, int mii_id, int reg,
> + u16 val);
> + void (*fix_mac_speed)(struct gmii2rgmii *xphy, unsigned int speed);
> +};
> +
> +extern int gmii2rgmii_phyprobe(struct gmii2rgmii *xphy);
> +#endif
I see a compilation issue here:
You should provide a way to have this function even if the
NET_VENDOR_XILINX config option is not selected (test to compile with
the sama5_defconfig and you'll see).
What about making this function void in case of !XILINX?
(so, NACK for the series as it is).
Bye,
--
Nicolas Ferre