[PATCH v3] arm64: dts: rockchip: add the power domain node for rk3399

From: Caesar Wang
Date: Mon Jul 04 2016 - 08:34:24 EST


From: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx>

In order to meet low power requirements, a power management unit (PMU) is
designed for controlling power resources in RK3399. The RK3399 PMU is
dedicated for managing the power of the whole chip.

1. add pd node for RK3399 Soc
2. create power domain tree
3. add qos node for domain

>From the DT/binds and driver can get more detail information:
The driver:
drivers/soc/rockchip/pm_domains.c
The document:
Documentation/devicetree/bindings/soc/rockchip/power_domain.txt

Note:
As the TRM lists many voltage domains and power domains, then this patch
adds some domains for driver. Due to some domains
(e.g. emmc, usb, core)...We can't turned off it on
bootup, or says some device driver can't handle the power domain enough.
Maybe We will add more other domains in the future or later.

Signed-off-by: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx>
Signed-off-by: Caesar Wang <wxt@xxxxxxxxxxxxxx>
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-rockchip@xxxxxxxxxxxxxxxxxxx
Cc: Heiko Stuebner <heiko@xxxxxxxxx>

---

Changes in v3:
- As some commnets on https://patchwork.kernel.org/patch/9209205/
- according to the alphabetically sort
- %s/RK3399_PD_VOP/RK3399_PD_VOPL, %s/RK3399_PD_IE/RK3399_PD_IEP

Changes in v2:
- As Doug/Heiko commnets on https://patchwork.kernel.org/patch/9206415/.
drop the debugfs-dump and Add the comments for alphabetical order.

arch/arm64/boot/dts/rockchip/rk3399.dtsi | 179 +++++++++++++++++++++++++++++++
1 file changed, 179 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index a6dd623..4559c04 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -45,6 +45,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/rk3399-power.h>
#include <dt-bindings/thermal/thermal.h>

/ {
@@ -594,6 +595,184 @@
status = "disabled";
};

+ qos_hdcp: qos_hdcp@ffa90000 {
+ compatible = "syscon";
+ reg = <0x0 0xffa90000 0x0 0x20>;
+ };
+
+ qos_iep: qos_iep@ffa98000 {
+ compatible = "syscon";
+ reg = <0x0 0xffa98000 0x0 0x20>;
+ };
+
+ qos_isp0_m0: qos_isp0_m0@ffaa0000 {
+ compatible = "syscon";
+ reg = <0x0 0xffaa0000 0x0 0x20>;
+ };
+
+ qos_isp0_m1: qos_isp0_m1@ffaa0080 {
+ compatible = "syscon";
+ reg = <0x0 0xffaa0080 0x0 0x20>;
+ };
+
+ qos_isp1_m0: qos_isp1_m0@ffaa8000 {
+ compatible = "syscon";
+ reg = <0x0 0xffaa8000 0x0 0x20>;
+ };
+
+ qos_isp1_m1: qos_isp1_m1@ffaa8080 {
+ compatible = "syscon";
+ reg = <0x0 0xffaa8080 0x0 0x20>;
+ };
+
+ qos_rga_r: qos_rga_r@ffab0000 {
+ compatible = "syscon";
+ reg = <0x0 0xffab0000 0x0 0x20>;
+ };
+
+ qos_rga_w: qos_rga_w@ffab0080 {
+ compatible = "syscon";
+ reg = <0x0 0xffab0080 0x0 0x20>;
+ };
+
+ qos_video_m0: qos_video_m0@ffab8000 {
+ compatible = "syscon";
+ reg = <0x0 0xffab8000 0x0 0x20>;
+ };
+
+ qos_video_m1_r: qos_video_m1_r@ffac0000 {
+ compatible = "syscon";
+ reg = <0x0 0xffac0000 0x0 0x20>;
+ };
+
+ qos_video_m1_w: qos_video_m1_w@ffac0080 {
+ compatible = "syscon";
+ reg = <0x0 0xffac0080 0x0 0x20>;
+ };
+
+ qos_vop_big_r: qos_vop_big_r@ffac8000 {
+ compatible = "syscon";
+ reg = <0x0 0xffac8000 0x0 0x20>;
+ };
+
+ qos_vop_big_w: qos_vop_big_w@ffac8080 {
+ compatible = "syscon";
+ reg = <0x0 0xffac8080 0x0 0x20>;
+ };
+
+ qos_vop_little: qos_vop_little@ffad0000 {
+ compatible = "syscon";
+ reg = <0x0 0xffad0000 0x0 0x20>;
+ };
+
+ qos_gpu: qos_gpu@ffae0000 {
+ compatible = "syscon";
+ reg = <0x0 0xffae0000 0x0 0x20>;
+ };
+
+ pmu: power-management@ff310000 {
+ compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
+ reg = <0x0 0xff310000 0x0 0x1000>;
+
+ /*
+ * Note: RK3399 supports 6 voltage domains including VD_CORE_L,
+ * VD_CORE_B, VD_CENTER, VD_GPU, VD_LOGIC and VD_PMU.
+ * Some of the power domains are grouped together for every
+ * voltage domain.
+ * The detail contents as below.
+ */
+ power: power-controller {
+ status = "okay";
+ compatible = "rockchip,rk3399-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* These power domains are grouped by VD_CENTER */
+ pd_iep@RK3399_PD_IEP {
+ reg = <RK3399_PD_IEP>;
+ clocks = <&cru ACLK_IEP>,
+ <&cru HCLK_IEP>;
+ pm_qos = <&qos_iep>;
+ };
+ pd_vcodec@RK3399_PD_VCODEC {
+ reg = <RK3399_PD_VCODEC>;
+ clocks = <&cru ACLK_VCODEC>,
+ <&cru HCLK_VCODEC>;
+ pm_qos = <&qos_video_m0>;
+ };
+ pd_vdu@RK3399_PD_VDU {
+ reg = <RK3399_PD_VDU>;
+ clocks = <&cru ACLK_VDU>,
+ <&cru HCLK_VDU>;
+ pm_qos = <&qos_video_m1_r>,
+ <&qos_video_m1_w>;
+ };
+ pd_rga@RK3399_PD_RGA {
+ reg = <RK3399_PD_RGA>;
+ clocks = <&cru ACLK_RGA>,
+ <&cru HCLK_RGA>;
+ pm_qos = <&qos_rga_r>,
+ <&qos_rga_w>;
+ };
+
+ /* These power domains are grouped by VD_GPU */
+ pd_gpu@RK3399_PD_GPU {
+ reg = <RK3399_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ pm_qos = <&qos_gpu>;
+ };
+
+ /* These power domains are grouped by VD_LOGIC */
+ pd_vio@RK3399_PD_VIO {
+ reg = <RK3399_PD_VIO>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_hdcp@RK3399_PD_HDCP {
+ reg = <RK3399_PD_HDCP>;
+ clocks = <&cru ACLK_HDCP>,
+ <&cru HCLK_HDCP>,
+ <&cru PCLK_HDCP>;
+ pm_qos = <&qos_hdcp>;
+ };
+ pd_isp0@RK3399_PD_ISP0 {
+ reg = <RK3399_PD_ISP0>;
+ clocks = <&cru ACLK_ISP0>,
+ <&cru HCLK_ISP0>;
+ pm_qos = <&qos_isp0_m0>,
+ <&qos_isp0_m1>;
+ };
+ pd_isp1@RK3399_PD_ISP1 {
+ reg = <RK3399_PD_ISP1>;
+ clocks = <&cru ACLK_ISP1>,
+ <&cru HCLK_ISP1>;
+ pm_qos = <&qos_isp1_m0>,
+ <&qos_isp1_m1>;
+ };
+ pd_vo@RK3399_PD_VO {
+ reg = <RK3399_PD_VO>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_vopb@RK3399_PD_VOPB {
+ reg = <RK3399_PD_VOPB>;
+ clocks = <&cru ACLK_VOP0>,
+ <&cru HCLK_VOP0>;
+ pm_qos = <&qos_vop_big_r>,
+ <&qos_vop_big_w>;
+ };
+ pd_vopl@RK3399_PD_VOPL {
+ reg = <RK3399_PD_VOPL>;
+ clocks = <&cru ACLK_VOP1>,
+ <&cru HCLK_VOP1>;
+ pm_qos = <&qos_vop_little>;
+ };
+ };
+ };
+ };
+ };
+
pmugrf: syscon@ff320000 {
compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
reg = <0x0 0xff320000 0x0 0x1000>;
--
1.9.1