Re: [PATCH 2/4] dt-bindings: Document the STM32 reset bindings

[Gabriel Fernandez]

Hi Rob,

Thanks for reviewing

On 07/05/2016 06:18 PM, Rob Herring wrote:
> On Mon, Jul 04, 2016 at 03:47:30PM +0200, gabriel.fernandez@xxxxxx wrote:
> > From: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
> >
> > This adds documentation of device tree bindings for the
> > STM32 reset controller.
> >
> > Signed-off-by: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
> > ---
> >   .../devicetree/bindings/reset/st,stm32-rcc.txt     | 50 ++++++++++++++++++++++
> >   1 file changed, 50 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
> >
> > diff --git a/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
> > new file mode 100644
> > index 0000000..333080c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
> > @@ -0,0 +1,50 @@
> > +STMicroelectronics STM32 Peripheral Reset Controller
> > +====================================================
> > +
> > +The RCC IP is both a reset and a clock controller. This documentation only
> > +documents the reset part.
> The clock part is already documented or will do later? Either way, you
> are describing an IP block, so please describe all of it now and in one
> place.
>
> Rob
The clock part is already documented.

Okay to put this in one place, but in which directory ?
what do you prefer ?
- create a rcc directory
- put the file on top, in Documentation/devicetree/bindings

Best regards

Gabriel