[PATCH net] r8152: remove the setting of LAN_WAKE_EN

From: Hayes Wang
Date: Wed Jul 06 2016 - 05:04:46 EST


The LAN_WAKE_EN is not used to determine if the device could support
WOL. It is used to sigal a GPIO pin when a WOL event occurs. The WOL
still works even though it is disabled.

Signed-off-by: Hayes Wang <hayeswang@xxxxxxxxxxx>
---
drivers/net/usb/r8152.c | 8 +-------
1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 0da72d3..419f4ce 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2296,10 +2296,6 @@ static u32 __rtl_get_wol(struct r8152 *tp)
u32 ocp_data;
u32 wolopts = 0;

- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG5);
- if (!(ocp_data & LAN_WAKE_EN))
- return 0;
-
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
if (ocp_data & LINK_ON_WAKE_EN)
wolopts |= WAKE_PHY;
@@ -2332,15 +2328,13 @@ static void __rtl_set_wol(struct r8152 *tp, u32 wolopts)
ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);

ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
- ocp_data &= ~(UWF_EN | BWF_EN | MWF_EN | LAN_WAKE_EN);
+ ocp_data &= ~(UWF_EN | BWF_EN | MWF_EN);
if (wolopts & WAKE_UCAST)
ocp_data |= UWF_EN;
if (wolopts & WAKE_BCAST)
ocp_data |= BWF_EN;
if (wolopts & WAKE_MCAST)
ocp_data |= MWF_EN;
- if (wolopts & WAKE_ANY)
- ocp_data |= LAN_WAKE_EN;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data);

ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
--
2.7.4