Re: [PATCH v3 13/14] clk: sunxi-ng: Add H3 clocks

From: Michael Turquette
Date: Wed Jul 06 2016 - 22:33:17 EST


Hi Maxime,

Quoting Maxime Ripard (2016-06-29 12:05:34)
> +static void __init sun8i_h3_ccu_setup(struct device_node *node)
> +{
> + void __iomem *reg;
> + u32 val;
> +
> + reg = of_io_request_and_map(node, 0, of_node_full_name(node));
> + if (IS_ERR(reg)) {
> + pr_err("%s: Could not map the clock registers\n",
> + of_node_full_name(node));
> + return;
> + }
> +
> + /* Force the PLL-Audio-1x divider to 4 */
> + val = readl(reg + SUN8I_H3_PLL_AUDIO_REG);
> + val &= ~GENMASK(4, 0);
> + writel(val | 3, reg + SUN8I_H3_PLL_AUDIO_REG);
> +
> + sunxi_ccu_probe(node, reg, &sun8i_h3_ccu_desc);
> +}
> +CLK_OF_DECLARE(sun8i_h3_ccu, "allwinner,sun8i-h3-ccu",
> + sun8i_h3_ccu_setup);

There are several examples of drivers that split the clocks between
"early" CLK_OF_DECLARE clocks and "late" module clocks. If you really
need early clocks (which is less likely on a 64-bit platform with
architected timers), it would be nice to pair that with a proper
platform_driver (using builtin_platform_driver most likely).

Otherwise that is my only nitpick with this series. Looks good!

Best regards,
Mike