[PATCH v4 0/2] mark spi clocks as critical and enable spi3 clocks

From: Andi Shyti
Date: Thu Jul 07 2016 - 08:14:18 EST


Hi,

I managed to bring some confusion on these two patches, but
finally I managed to find the right solution (which is similar to
the patch version 2).

The real issue was hidden in the spi bus as reported in the
following patch:

https://lkml.org/lkml/2016/7/7/81

This patch in principle replaces the clock_ignore_unused flags in
for the spi and enables the spi3 that in the tm2(e) board will be
connected to the IR remote controller.

Changelog:

V1 -> V2
- the "sclk_spi3" doesn't need to be enabled in boot time as it
is handled by the spi driver itself.

- use the CLK_IS_CRITICAL flag for the ioclk

V2 -> V3
- some more tests has confirmed taht "sclk_spi1,3" need to be
enabled as critical!

- added Chanwoo's review in the second commit.

V3 -> V4
- patch V3 was wrong, back to patch v2.

- reworded the commit of patch no. 1

Thanks,
Andi

Andi Shyti (2):
clk: exynos5433: do not use CLK_IGNORE_UNUSED for SPI clocks
clk: exynos5433: enable sclk_ioclk for SPI3

drivers/clk/samsung/clk-exynos5433.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

--
2.8.1