Hi Randy,sata bridge is just a SATA to usb bridge and the "reload" bring back the DVP camera interface and
Am Donnerstag, 7. Juli 2016, 02:22:57 schrieb Randy Li:
The rk3288 firefly reload is a Rockchip RK3288 based board be found byI've now had a chance to look at that reload board on the firefly site.
core board and main board. The regulators are connected in a different
way to the previous version of firefly boards, it is necessary to
move some common code to uncommon place.
I only tested the ethernet and confirmed that works.
The usb in this board won't caused by the bugs in the driver.
This version follow the suggests from Heiko Stuebner,
except the duplicated supply name problem, I don't think
it could be fixed in that way.
Firefly also is the company name, so a board named that way is not
necessarily a "variant" :-) .
And looking at the "reload" board this definitly seems to be a very
different product with it being a system-on-module+baseboard design with
additional peripherals like that sata bridge, camera interfaces and probably
more.Yes, from the evb. But the even the main board of evb in rockchip company have at lease 3 versions
As you might've seen, most Rockchip boards are based on some reference-
design, so are similar in a big part of their core layout.
So, looking at the vastly different product the reload is, I'd really likeThe main problem is that power connections are different. That is why I decide to make a
to have a separate dts for the reload, to not run into more confusing
differences later on.
Also, when adding a new board, please also add an entry toI would send a patch set in a few days.
Documentation/devicetree/bindingd/arm/rockchip.txt
ThanksThank you for you review and you patient again
Heiko