RE: [PATCH] Input: /input/mouse/elan_i2c_core.c Fix some Asus touchapod which casue TP no funciton sometimes, the patch detect some specific touchpad and run a special initialize

[ååæ]

Hi Dmitry,

-----Original Message-----
From: Dmitry Torokhov [mailto:dmitry.torokhov@xxxxxxxxx] 
Sent: Saturday, July 09, 2016 8:25 AM
To: KT Liao
Cc: linux-kernel@xxxxxxxxxxxxxxx; linux-input@xxxxxxxxxxxxxxx; phoenix@xxxxxxxxxx; kt.liao@xxxxxxxxxx
Subject: Re: [PATCH] Input: /input/mouse/elan_i2c_core.c Fix some Asus touchapod which casue TP no funciton sometimes, the patch detect some specific touchpad and run a special initialize

Hi KT,

On Fri, Jul 08, 2016 at 08:12:09PM +0800, KT Liao wrote:
> Signed-off-by: KT Liao <kt.liao@xxxxxxxxxx>

Please make sure you add a blan line between change subject and the rest of description. Then git send-email will compose your email properly instead of lumping everything into one long line subject.
[KT] :Sorry, I will fix it in the later upstream
> ---
>  drivers/input/mouse/elan_i2c_core.c | 81 
> +++++++++++++++++++++++++++++--------
>  1 file changed, 65 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/input/mouse/elan_i2c_core.c 
> b/drivers/input/mouse/elan_i2c_core.c
> index 2f58985..1c200fb 100644
> --- a/drivers/input/mouse/elan_i2c_core.c
> +++ b/drivers/input/mouse/elan_i2c_core.c
> @@ -3,8 +3,8 @@
>   *
>   * Copyright (c) 2013 ELAN Microelectronics Corp.
>   *
> - * Author: ææç (Duson Lin) <dusonlin@xxxxxxxxxx>
> - * Version: 1.6.0
> + * Author: KT Liao <kt.liao@xxxxxxxxxx>
> + * Version: 1.6.2
>   *
>   * Based on cyapa driver:
>   * copyright (c) 2011-2012 Cypress Semiconductor, Inc.
> @@ -40,7 +40,7 @@
>  #include "elan_i2c.h"
>  
>  #define DRIVER_NAME		"elan_i2c"
> -#define ELAN_DRIVER_VERSION	"1.6.1"
> +#define ELAN_DRIVER_VERSION	"1.6.2"
>  #define ELAN_VENDOR_ID		0x04f3
>  #define ETP_MAX_PRESSURE	255
>  #define ETP_FWIDTH_REDUCE	90
> @@ -95,6 +95,8 @@ struct elan_tp_data {
>  	bool			baseline_ready;
>  };
>  
> +static int check_ASUS_special_fw(struct elan_tp_data *data);
> +
>  static int elan_get_fwinfo(u8 iap_version, u16 *validpage_count,
>  			   u16 *signature_address)
>  {
> @@ -210,21 +212,40 @@ static int __elan_initialize(struct elan_tp_data *data)
>  		return error;
>  	}
>  
> -	data->mode |= ETP_ENABLE_ABS;
> -	error = data->ops->set_mode(client, data->mode);
> -	if (error) {
> -		dev_err(&client->dev,
> -			"failed to switch to absolute mode: %d\n", error);
> -		return error;
> -	}
> +	/* If it's the special FW, it need a different flow for mode change.*/
> +	if (check_ASUS_special_fw(data)) {
> +		error = data->ops->sleep_control(client, false);
> +		if (error) {
> +			dev_err(&client->dev,
> +				"failed to wake device up: %d\n", error);
> +			return error;
> +		}
>  
> -	error = data->ops->sleep_control(client, false);
> -	if (error) {
> -		dev_err(&client->dev,
> -			"failed to wake device up: %d\n", error);
> -		return error;
> -	}
> +		msleep(200);
>  
> +		data->mode |= ETP_ENABLE_ABS;
> +		error = data->ops->set_mode(client, data->mode);
> +		if (error) {
> +			dev_err(&client->dev,
> +				"failed to switch to absolute mode: %d\n", error);
> +			return error;
> +		}
> +	} else {
> +		data->mode |= ETP_ENABLE_ABS;
> +		error = data->ops->set_mode(client, data->mode);
> +		if (error) {
> +			dev_err(&client->dev,
> +				"failed to switch to absolute mode: %d\n", error);
> +			return error;
> +		}
> +
> +		error = data->ops->sleep_control(client, false);
> +		if (error) {
> +			dev_err(&client->dev,
> +				"failed to wake device up: %d\n", error);
> +			return error;
> +		}
> +	}
>  	return 0;
>  }
>  
> @@ -757,6 +778,34 @@ out:
>  	return retval;
>  }
>  
> +static int check_ASUS_special_fw(struct elan_tp_data *data) {
> +	struct i2c_client *client = data->client;
> +	int error;
> +
> +	error = data->ops->get_product_id(client, &data->product_id);
> +	if (error)
> +		return false;
> +
> +	error = data->ops->get_sm_version(client, &data->ic_type,
> +					  &data->sm_version);
> +	if (error)
> +		return false;

That means we'd be fetching product ID and IC type twice when initializing the device. Can we come with a way to do it once?
[KT]:Because the elan_query_device_info() is behind the elan_initialize(). That's why I fetching product ID and IC type in the elan_initialize()
    I will discuss with FW team and then execute elan_query_device_info() first to get product_id and ic_type. 
> +
> +	if (data->ic_type == 0x0E) {

Maybe

	if (dat->ic_type != 0x0e)
		return false;

? Then you would not need to indent the switch statement.
[KT] : OK, fix in the next patch
> +		switch (data->product_id) {
> +		case 0x05:
> +		case 0x06:
> +		case 0x07:
> +		case 0x09:
> +		case 0x13:
> +			return true;
> +		default:
> +			return false;
> +		}
> +	}
> +	return false;
> +}
>  
>  static DEVICE_ATTR_WO(acquire);
>  static DEVICE_ATTR_RO(min);
> --
> 2.7.4
> 

Thanks.

-- 
Dmitry