Re: [PATCH] ata: hpt366: fix incorrect mask when checking at cmd_high_time

[Colin Ian King]

On 12/07/16 12:27, Bartlomiej Zolnierkiewicz wrote:
> 
> Hi,
> 
> On Tuesday, July 12, 2016 12:16:19 PM Colin King wrote:
>> From: Colin Ian King <colin.king@xxxxxxxxxxxxx>
>>
>> According to the HPT366 data sheet, PCI config space dword 0x40-0x43
>> bits 11:8 specify the primary drive cmd_high_time, however,
>> currently just 3 bits of the 4 are being used because the mask
>> is 0x700 and not 0x0f00.  Fix the mask, allowing for the 40MHz clock
>> to be detected.
>>
>> Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
> 
> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
> 
> Thanks for the patch, could you also fix also the old driver
> (drivers/ide/hpt366.c)?

Yep, patch already sent.

https://lkml.org/lkml/2016/7/12/199

> 
> Best regards,
> --
> Bartlomiej Zolnierkiewicz
> Samsung R&D Institute Poland
> Samsung Electronics
> 
>> ---
>>  drivers/ata/pata_hpt366.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
>> index e5fb752..a219a50 100644
>> --- a/drivers/ata/pata_hpt366.c
>> +++ b/drivers/ata/pata_hpt366.c
>> @@ -368,7 +368,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
>>  
>>  	/* PCI clocking determines the ATA timing values to use */
>>  	/* info_hpt366 is safe against re-entry so we can scribble on it */
>> -	switch ((reg1 & 0x700) >> 8) {
>> +	switch ((reg1 & 0xf00) >> 8) {
>>  	case 9:
>>  		hpriv = &hpt366_40;
>>  		break;
>