Re: [PATCH v6 3/5] usb: dwc3: add phyif_utmi_quirk

[William.wu]

Dear Rob,


On 2016/7/11 22:58, Rob Herring wrote:
> On Thu, Jul 07, 2016 at 10:54:24AM +0800, William Wu wrote:
> > Add a quirk to configure the core to support the
> > UTMI+ PHY with an 8- or 16-bit interface. UTMI+ PHY
> > interface is hardware property, and it's platform
> > dependent. Normall, the PHYIf can be configured
> s/Normall/Normally/
YeahïI'll fix it.:-)
> s/PHYIf/PHYIF/
Refer to DWC3 controller databook, "PHY Interface" called "PHYIf",
so I describe "PHYIf" here. Howeverï "PHYIFâseems more the norm,
I'll fix it.:-)
> > during coreconsultant. But for some specific usb
> s/usb/USB/

Thanks, I'll fix it.:-)

> > cores(e.g. rk3399 soc dwc3), the default PHYIf
> > configuration value is fault, so we need to
> > reconfigure it by software.
> >
> > And refer to the dwc3 databook, the GUSB2PHYCFG.USBTRDTIM
> s/dwc3/DWC3/
Thanks, I'll fix it too.
> > must be set to the corresponding value according to
> > the UTMI+ PHY interface.
> And wrap your lines at 70-74 characters.

Thanks for your suggestion, I'll pay attention to this problem next 
patch.:-)

Best Regardsï
        William Wu
> Rob