The HT capab info field inside the HT capab IE of the mesh beacon
is incorrect (in the case of 20MHz channel width).
To fix this driver will check configuration from cfg and
will build it accordingly.
Signed-off-by: Meirav Kama <meiravk@xxxxxx>
Signed-off-by: Yaniv Machani <yanivma@xxxxxx>
---
V3 - Updated comment
- Removed CFG changes, as they are not correct.
net/mac80211/mesh.c | 33 ++++++++++++++++++++++++++++++++-
net/mac80211/util.c | 3 ---
2 files changed, 32 insertions(+), 4 deletions(-)
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 9214bc1..275131d 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -422,6 +422,8 @@ int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata,
enum nl80211_band band = ieee80211_get_sdata_band(sdata);
struct ieee80211_supported_band *sband;
u8 *pos;
+ u16 cap;
+
sband = local->hw.wiphy->bands[band];
if (!sband->ht_cap.ht_supported ||
@@ -430,11 +432,40 @@ int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata,
sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
return 0;
+ /* determine capability flags */
+ cap = sband->ht_cap.cap;
+
+ /* if channel width is 20MHz - configure HT capab accordingly*/
+ if (sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20) {
+ cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+ cap &= ~IEEE80211_HT_CAP_DSSSCCK40;
+ }
+
+ /* set SM PS mode properly */
+ cap &= ~IEEE80211_HT_CAP_SM_PS;
+ switch (sdata->smps_mode) {
+ case IEEE80211_SMPS_AUTOMATIC:
+ case IEEE80211_SMPS_NUM_MODES:
+ WARN_ON(1);
+ case IEEE80211_SMPS_OFF:[...]
+ cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
+ IEEE80211_HT_CAP_SM_PS_SHIFT;
+ break;
+ case IEEE80211_SMPS_STATIC:
+ cap |= WLAN_HT_CAP_SM_PS_STATIC <<
+ IEEE80211_HT_CAP_SM_PS_SHIFT;
+ break;
+ case IEEE80211_SMPS_DYNAMIC:
+ cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
+ IEEE80211_HT_CAP_SM_PS_SHIFT;
+ break;
+ }
+
if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap))
return -ENOMEM;
pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_cap));
- ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, sband->ht_cap.cap);
+ ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, cap);
return 0;
}