Re: [PATCH v3] Input: synaptics-rmi4: Support regulator supplies

[Dmitry Torokhov]

On Fri, Jun 24, 2016 at 05:40:00PM -0700, Andrew Duggan wrote:
> On 06/10/2016 10:25 PM, Bjorn Andersson wrote:
> >From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
> >
> >Support the two supplies - vdd and vio - to make it possible to control
> >power to the Synaptics chip.
> >
> >Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
> >Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> 
> Reviewed-by: Andrew Duggan <aduggan@xxxxxxxxxxxxx>

Applied, thank you.

> 
> >---
> >  .../devicetree/bindings/input/rmi4/rmi_i2c.txt     |  9 +++++
> >  drivers/input/rmi4/rmi_i2c.c                       | 41 ++++++++++++++++++++++
> >  2 files changed, 50 insertions(+)
> >
> >diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
> >index 95fa715c6046..ec908b91fd90 100644
> >--- a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
> >+++ b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
> >@@ -22,6 +22,15 @@ See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> >  - syna,reset-delay-ms: The number of milliseconds to wait after resetting the
> >  			device.
> >+- syna,startup-delay-ms: The number of milliseconds to wait after powering on
> >+			 the device.
> >+
> >+- vdd-supply: VDD power supply.
> >+See ../regulator/regulator.txt
> >+
> >+- vio-supply: VIO power supply
> >+See ../regulator/regulator.txt
> >+
> >  Function Parameters:
> >  Parameters specific to RMI functions are contained in child nodes of the rmi device
> >   node. Documentation for the parameters of each function can be found in:
> >diff --git a/drivers/input/rmi4/rmi_i2c.c b/drivers/input/rmi4/rmi_i2c.c
> >index a96a326b53bd..71dc6cdde8ac 100644
> >--- a/drivers/input/rmi4/rmi_i2c.c
> >+++ b/drivers/input/rmi4/rmi_i2c.c
> >@@ -11,6 +11,8 @@
> >  #include <linux/rmi.h>
> >  #include <linux/irq.h>
> >  #include <linux/of.h>
> >+#include <linux/delay.h>
> >+#include <linux/regulator/consumer.h>
> >  #include "rmi_driver.h"
> >  #define BUFFER_SIZE_INCREMENT 32
> >@@ -37,6 +39,9 @@ struct rmi_i2c_xport {
> >  	u8 *tx_buf;
> >  	size_t tx_buf_size;
> >+
> >+	struct regulator_bulk_data supplies[2];
> >+	u32 startup_delay;
> >  };
> >  #define RMI_PAGE_SELECT_REGISTER 0xff
> >@@ -246,6 +251,24 @@ static int rmi_i2c_probe(struct i2c_client *client,
> >  		return -ENODEV;
> >  	}
> >+	rmi_i2c->supplies[0].supply = "vdd";
> >+	rmi_i2c->supplies[1].supply = "vio";
> >+	retval = devm_regulator_bulk_get(&client->dev,
> >+					 ARRAY_SIZE(rmi_i2c->supplies),
> >+					 rmi_i2c->supplies);
> >+	if (retval < 0)
> >+		return retval;
> >+
> >+	retval = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies),
> >+				       rmi_i2c->supplies);
> >+	if (retval < 0)
> >+		return retval;
> >+
> >+	of_property_read_u32(client->dev.of_node, "syna,startup-delay-ms",
> >+			     &rmi_i2c->startup_delay);
> >+
> >+	msleep(rmi_i2c->startup_delay);
> >+
> >  	rmi_i2c->client = client;
> >  	mutex_init(&rmi_i2c->page_mutex);
> >@@ -286,6 +309,7 @@ static int rmi_i2c_remove(struct i2c_client *client)
> >  	struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
> >  	rmi_unregister_transport_device(&rmi_i2c->xport);
> >+	regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies), rmi_i2c->supplies);
> >  	return 0;
> >  }
> >@@ -308,6 +332,9 @@ static int rmi_i2c_suspend(struct device *dev)
> >  			dev_warn(dev, "Failed to enable irq for wake: %d\n",
> >  				ret);
> >  	}
> >+
> >+	regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies), rmi_i2c->supplies);
> >+
> >  	return ret;
> >  }
> >@@ -317,6 +344,12 @@ static int rmi_i2c_resume(struct device *dev)
> >  	struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
> >  	int ret;
> >+	ret = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies), rmi_i2c->supplies);
> >+	if (ret)
> >+		return ret;
> >+
> >+	msleep(rmi_i2c->startup_delay);
> >+
> >  	enable_irq(rmi_i2c->irq);
> >  	if (device_may_wakeup(&client->dev)) {
> >  		ret = disable_irq_wake(rmi_i2c->irq);
> >@@ -346,6 +379,8 @@ static int rmi_i2c_runtime_suspend(struct device *dev)
> >  	disable_irq(rmi_i2c->irq);
> >+	regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies), rmi_i2c->supplies);
> >+
> >  	return 0;
> >  }
> >@@ -355,6 +390,12 @@ static int rmi_i2c_runtime_resume(struct device *dev)
> >  	struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
> >  	int ret;
> >+	ret = regulator_bulk_enable(ARRAY_SIZE(rmi_i2c->supplies), rmi_i2c->supplies);
> >+	if (ret)
> >+		return ret;
> >+
> >+	msleep(rmi_i2c->startup_delay);
> >+
> >  	enable_irq(rmi_i2c->irq);
> >  	ret = rmi_driver_resume(rmi_i2c->xport.rmi_dev);
> 

-- 
Dmitry