Re: [PATCH v4 3/4] drm/bridge: analogix_dp: add the PSR function support

From: Sean Paul
Date: Thu Jul 14 2016 - 11:23:40 EST

Next message: David Howells: "[PATCH net-next] rxrpc: checking for IS_ERR() instead of NULL"
Previous message: Nicolai Stange: "[PATCH v4 2/2] arch, x86, tsc: inform TSC deadline clockevent device about recalibration"
In reply to: Yakir Yang: "[PATCH v4 3/4] drm/bridge: analogix_dp: add the PSR function support"
Next in thread: Yakir Yang: "[PATCH v4 2/4] drm/rockchip: add an common abstracted PSR driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Thu, Jul 14, 2016 at 12:15:53PM +0800, Yakir Yang wrote:
> The full name of PSR is Panel Self Refresh, panel device could refresh
> itself with the hardware framebuffer in panel, this would make lots of
> sense to save the power consumption.
>
> This patch have exported two symbols for platform driver to implement
> the PSR function in hardware side:
> - analogix_dp_active_psr()
> - analogix_dp_inactive_psr()
>
> Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
> ---
> Changes in v4:
> - Downgrade the PSR version print message to debug level. (Sean)
> - Return 'void' instead of 'int' in analogix_dp_enable_sink_psr(). (Sean)
> - Delete the unused read dpcd operations in analogix_dp_enable_sink_psr(). (Sean)
> - Delete the arbitrary usleep_range in analogix_dp_enable_psr_crc. (Sean).
> - Clean up the hardcoded values in analogix_dp_send_psr_spd(). (Sean)
> - Rename "active/inactive" to "enable/disable". (Sean, Dominik)
> - Keep set the PSR_VID_CRC_FLUSH gate in analogix_dp_enable_psr_crc().
>
> Changes in v3:
> - split analogix_dp_enable_psr(), make it more clearly
> analogix_dp_detect_sink_psr()
> analogix_dp_enable_sink_psr()
> - remove some nosie register setting comments
>
> Changes in v2:
> - introduce in v2, splite the common Analogix DP changes out
>
> drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 60 ++++++++++++++++++++++
> drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 4 ++
> drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 49 ++++++++++++++++++
> drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h | 28 ++++++++++
> include/drm/bridge/analogix_dp.h | 3 ++
> 5 files changed, 144 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> index 32715da..1fec91a 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
> @@ -97,6 +97,62 @@ static int analogix_dp_detect_hpd(struct analogix_dp_device *dp)
> return 0;
> }
>
> +int analogix_dp_enable_psr(struct device *dev)
> +{
> + struct analogix_dp_device *dp = dev_get_drvdata(dev);
> +
> + if (!dp->psr_support)
> + return -EINVAL;
> +
> + analogix_dp_send_psr_spd(dp, EDP_VSC_PSR_STATE_ACTIVE |
> + EDP_VSC_PSR_CRC_VALUES_VALID);
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(analogix_dp_enable_psr);
> +
> +int analogix_dp_disable_psr(struct device *dev)
> +{
> + struct analogix_dp_device *dp = dev_get_drvdata(dev);
> +
> + if (!dp->psr_support)
> + return -EINVAL;
> +
> + analogix_dp_send_psr_spd(dp, 0);
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(analogix_dp_disable_psr);
> +
> +static bool analogix_dp_detect_sink_psr(struct analogix_dp_device *dp)
> +{
> + unsigned char psr_version;
> +
> + analogix_dp_read_byte_from_dpcd(dp, DP_PSR_SUPPORT, &psr_version);
> + dev_dbg(dp->dev, "Panel PSR version : %x\n", psr_version);
> +
> + return (psr_version & DP_PSR_IS_SUPPORTED) ? true : false;
> +}
> +
> +static void analogix_dp_enable_sink_psr(struct analogix_dp_device *dp)
> +{
> + unsigned char psr_en;
> +
> + /* Disable psr function */
> + analogix_dp_read_byte_from_dpcd(dp, DP_PSR_EN_CFG, &psr_en);
> + psr_en &= ~DP_PSR_ENABLE;
> + analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en);
> +
> + /* Main-Link transmitter remains active during PSR active states */
> + psr_en = DP_PSR_MAIN_LINK_ACTIVE | DP_PSR_CRC_VERIFICATION;
> + analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en);
> +
> + /* Enable psr function */
> + psr_en = DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE |
> + DP_PSR_CRC_VERIFICATION;
> + analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en);
> +
> + analogix_dp_enable_psr_crc(dp);
> +}
> +
> static unsigned char analogix_dp_calc_edid_check_sum(unsigned char *edid_data)
> {
> int i;
> @@ -921,6 +977,10 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
>
> /* Enable video */
> analogix_dp_start_video(dp);
> +
> + dp->psr_support = analogix_dp_detect_sink_psr(dp);
> + if (dp->psr_support)
> + analogix_dp_enable_sink_psr(dp);
> }
>
> int analogix_dp_get_modes(struct drm_connector *connector)
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> index b456380..6ca5dde 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
> @@ -177,6 +177,7 @@ struct analogix_dp_device {
> int hpd_gpio;
> bool force_hpd;
> unsigned char edid[EDID_BLOCK_LENGTH * 2];
> + bool psr_support;
>
> struct analogix_dp_plat_data *plat_data;
> };
> @@ -278,4 +279,7 @@ int analogix_dp_is_video_stream_on(struct analogix_dp_device *dp);
> void analogix_dp_config_video_slave_mode(struct analogix_dp_device *dp);
> void analogix_dp_enable_scrambling(struct analogix_dp_device *dp);
> void analogix_dp_disable_scrambling(struct analogix_dp_device *dp);
> +void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp);
> +void analogix_dp_send_psr_spd(struct analogix_dp_device *dp, int db1);
> +
> #endif /* _ANALOGIX_DP_CORE_H */
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> index 48030f0..26446ae 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
> @@ -26,6 +26,9 @@
> #define COMMON_INT_MASK_4 (HOTPLUG_CHG | HPD_LOST | PLUG)
> #define INT_STA_MASK INT_HPD
>
> +static u32 psr_spd_hbx[] = { 0x00, 0x07, 0x02, 0x08 };
> +static u32 psr_spd_pbx[] = { 0x00, 0x16, 0xCE, 0x5D };

These need to be const. Can you also please add a comment explaining where you
got the values from?

> +
> void analogix_dp_enable_video_mute(struct analogix_dp_device *dp, bool enable)
> {
> u32 reg;
> @@ -1322,3 +1325,49 @@ void analogix_dp_disable_scrambling(struct analogix_dp_device *dp)
> reg |= SCRAMBLING_DISABLE;
> writel(reg, dp->reg_base + ANALOGIX_DP_TRAINING_PTN_SET);
> }
> +
> +void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp)
> +{
> + writel(PSR_VID_CRC_FLUSH | PSR_VID_CRC_ENABLE,
> + dp->reg_base + ANALOGIX_DP_CRC_CON);
> +}
> +
> +void analogix_dp_send_psr_spd(struct analogix_dp_device *dp, int db1)
> +{
> + unsigned int val;
> + unsigned int i;
> +
> + /* don't send info frame */
> + val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
> + val &= ~IF_EN;
> + writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
> +
> + /* configure single frame update mode */
> + writel(PSR_FRAME_UP_TYPE_BURST | PSR_CRC_SEL_HARDWARE,
> + dp->reg_base + ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL);
> +
> + /* configure VSC HB0~HB3 and PB0~PB3 */
> + for (i = 0; i < 4; i++)
> + writel(psr_spd_hbx[i], dp->reg_base + ANALOGIX_DP_SPD_HB + i*4);
> + for (i = 0; i < 4; i++)
> + writel(psr_spd_pbx[i], dp->reg_base + ANALOGIX_DP_SPD_PB + i*4);
> +
> + /* configure DB0 / DB1 values */
> + writel(0x0, dp->reg_base + ANALOGIX_DP_VSC_SHADOW_DB0);
> + writel(db1, dp->reg_base + ANALOGIX_DP_VSC_SHADOW_DB1);
> +
> + /* set reuse spd inforframe */
> + val = readl(dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
> + val |= REUSE_SPD_EN;
> + writel(val, dp->reg_base + ANALOGIX_DP_VIDEO_CTL_3);
> +
> + /* mark info frame update */
> + val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
> + val = (val | IF_UP) & ~IF_EN;
> + writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
> +
> + /* send info frame */
> + val = readl(dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
> + val |= IF_EN;
> + writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL);
> +}
> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> index cdcc6c5..fd232b2 100644
> --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.h
> @@ -22,6 +22,8 @@
> #define ANALOGIX_DP_VIDEO_CTL_8 0x3C
> #define ANALOGIX_DP_VIDEO_CTL_10 0x44
>
> +#define ANALOGIX_DP_SPDIF_AUDIO_CTL_0 0xD8
> +
> #define ANALOGIX_DP_PLL_REG_1 0xfc
> #define ANALOGIX_DP_PLL_REG_2 0x9e4
> #define ANALOGIX_DP_PLL_REG_3 0x9e8
> @@ -30,6 +32,15 @@
>
> #define ANALOGIX_DP_PD 0x12c
>
> +#define ANALOGIX_DP_IF_TYPE 0x244
> +#define ANALOGIX_DP_IF_PKT_DB1 0x254
> +#define ANALOGIX_DP_IF_PKT_DB2 0x258
> +#define ANALOGIX_DP_SPD_HB 0x2F8
> +#define ANALOGIX_DP_SPD_PB 0x308
> +#define ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL 0x318
> +#define ANALOGIX_DP_VSC_SHADOW_DB0 0x31C
> +#define ANALOGIX_DP_VSC_SHADOW_DB1 0x320
> +
> #define ANALOGIX_DP_LANE_MAP 0x35C
>
> #define ANALOGIX_DP_ANALOG_CTL_1 0x370
> @@ -103,6 +114,8 @@
>
> #define ANALOGIX_DP_SOC_GENERAL_CTL 0x800
>
> +#define ANALOGIX_DP_CRC_CON 0x890
> +
> /* ANALOGIX_DP_TX_SW_RESET */
> #define RESET_DP_TX (0x1 << 0)
>
> @@ -151,6 +164,7 @@
> #define VID_CHK_UPDATE_TYPE_SHIFT (4)
> #define VID_CHK_UPDATE_TYPE_1 (0x1 << 4)
> #define VID_CHK_UPDATE_TYPE_0 (0x0 << 4)
> +#define REUSE_SPD_EN (0x1 << 3)
>
> /* ANALOGIX_DP_VIDEO_CTL_8 */
> #define VID_HRES_TH(x) (((x) & 0xf) << 4)
> @@ -167,6 +181,12 @@
> #define REF_CLK_27M (0x0 << 0)
> #define REF_CLK_MASK (0x1 << 0)
>
> +/* ANALOGIX_DP_PSR_FRAME_UPDATE_CTRL */
> +#define PSR_FRAME_UP_TYPE_BURST (0x1 << 0)
> +#define PSR_FRAME_UP_TYPE_SINGLE (0x0 << 0)
> +#define PSR_CRC_SEL_HARDWARE (0x1 << 1)
> +#define PSR_CRC_SEL_MANUALLY (0x0 << 1)
> +
> /* ANALOGIX_DP_LANE_MAP */
> #define LANE3_MAP_LOGIC_LANE_0 (0x0 << 6)
> #define LANE3_MAP_LOGIC_LANE_1 (0x1 << 6)
> @@ -376,4 +396,12 @@
> #define VIDEO_MODE_SLAVE_MODE (0x1 << 0)
> #define VIDEO_MODE_MASTER_MODE (0x0 << 0)
>
> +/* ANALOGIX_DP_PKT_SEND_CTL */
> +#define IF_UP (0x1 << 4)
> +#define IF_EN (0x1 << 0)
> +
> +/* ANALOGIX_DP_CRC_CON */
> +#define PSR_VID_CRC_FLUSH (0x1 << 2)
> +#define PSR_VID_CRC_ENABLE (0x1 << 0)
> +
> #endif /* _ANALOGIX_DP_REG_H */
> diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
> index 261b86d..9cd8838 100644
> --- a/include/drm/bridge/analogix_dp.h
> +++ b/include/drm/bridge/analogix_dp.h
> @@ -38,6 +38,9 @@ struct analogix_dp_plat_data {
> struct drm_connector *);
> };
>
> +int analogix_dp_enable_psr(struct device *dev);
> +int analogix_dp_disable_psr(struct device *dev);
> +
> int analogix_dp_resume(struct device *dev);
> int analogix_dp_suspend(struct device *dev);
>
> --
> 1.9.1
>
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

Next message: David Howells: "[PATCH net-next] rxrpc: checking for IS_ERR() instead of NULL"
Previous message: Nicolai Stange: "[PATCH v4 2/2] arch, x86, tsc: inform TSC deadline clockevent device about recalibration"
In reply to: Yakir Yang: "[PATCH v4 3/4] drm/bridge: analogix_dp: add the PSR function support"
Next in thread: Yakir Yang: "[PATCH v4 2/4] drm/rockchip: add an common abstracted PSR driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]