Re: [PATCH 3/4] ARM: dts: at91: sama5d4_ma5d4: fix regulator names

[Marek Vasut]

On 07/13/2016 12:45 AM, Alexandre Belloni wrote:
> vcc_3v3_reg and vcc_mmc1_reg are fixed regulators and don't need a
> reg property. Remove their unit-address.
>
> Solves:
> Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name, but no reg property
> Warning (unit_address_vs_reg): Node /fixedregulator@1 has a unit name, but no reg property
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>

Reviewed-by: Marek Vasut <marex@xxxxxxx>

> ---
> Cc: Marek Vasut <marex@xxxxxxx>
>  arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
> index e7b2109fc85a..d9ca7f214677 100644
> --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
> +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
> @@ -106,7 +106,7 @@
>  		};
>  	};
>
> -	vcc_3v3_reg: fixedregulator@0 {
> +	vcc_3v3_reg: fixedregulator_3v3 {
>  		compatible = "regulator-fixed";
>  		regulator-name = "VCC 3V3";
>  		regulator-min-microvolt = <3300000>;
> @@ -115,7 +115,7 @@
>  		regulator-always-on;
>  	};
>
> -	vcc_mmc0_reg: fixedregulator@1 {
> +	vcc_mmc0_reg: fixedregulator_mmc0 {
>  		compatible = "regulator-fixed";
>  		gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
>  		regulator-name = "RST_n MCI0";


--
Best regards,
Marek Vasut