[PATCH v5 0/2] Add ACPI support and SMBus block read
From: Austin Christ
Date: Fri Jul 15 2016 - 16:09:09 EST
Add ACPI support to I2C QUP driver and get properties from ACPI table.
Add support to the I2C QUP driver to correctly handle SMBus block reads by
checking I2C_M_RECV_LEN flag and reading the first byte received as the
message length.
Documentation for the two properites used from ACPI will be submitted through
dsd@xxxxxxxxxx to https://github.com/ahs3/dsd. The documentation submitted will
be the following:
property-set: I2C Device Properties
set-type: definition
vendor: Qualcomm Technologies, Inc.
bus: acpi
device-id: QCOM8010
revision: 0
derived-from: /Qualcomm/acpi/QCOM8010/0
property: clock-frequency
type: integer
description:
Defines the target clock frequency of the I2C bus.
values:
integer: 0..20000000
description: integer value in hertz
example:
Package (2) { "clock-frequency", 100000 }
property: src-clock-hz
type: integer
description:
If present, defines the source clock frequency input
into the I2C QUP controller
values:
integer: 100000..1000000000
description: integer value in hertz
example:
Package (2) { "src-clock-hz", 20000000}
[V5]
- remove warning and use correct ACPI function
[V4]
- correct error code
- remove warning for fall back to default clock frequency
[V3]
- clean up unused variables
- use constant instead of variable for smbus length field
[V2]
- rework the smbus block read and break into separate function
- clean up redundant checks and variables
Naveen Kaje (2):
i2c: qup: add ACPI support
i2c: qup: support SMBus block read
drivers/i2c/busses/i2c-qup.c | 126 ++++++++++++++++++++++++++++++++++++-------
1 file changed, 107 insertions(+), 19 deletions(-)
--
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.