[PATCH 05/10] iio: cros_ec_sensors: add ChromeOS EC Contiguous Sensors driver

[Enric Balletbo i Serra]

Handle 3d contiguous sensors like Accelerometers, Gyroscope and
Magnetometer that are presented by the ChromeOS EC Sensor hub.

Signed-off-by: Guenter Roeck <groeck@xxxxxxxxxxxx>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
---
 drivers/iio/common/cros_ec_sensors/Kconfig         |   8 +
 drivers/iio/common/cros_ec_sensors/Makefile        |   1 +
 .../iio/common/cros_ec_sensors/cros_ec_sensors.c   | 322 +++++++++++++++++++++
 3 files changed, 331 insertions(+)
 create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c

diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig b/drivers/iio/common/cros_ec_sensors/Kconfig
index a30f41e..18002d6 100644
--- a/drivers/iio/common/cros_ec_sensors/Kconfig
+++ b/drivers/iio/common/cros_ec_sensors/Kconfig
@@ -12,3 +12,11 @@ config IIO_CROS_EC_SENSORS_CORE
 	  driver.
 	  Define common attributes and sysfs interrupt handler.
 
+config IIO_CROS_EC_SENSORS
+	tristate "ChromeOS EC Contiguous Sensors"
+	select IIO_CROS_EC_SENSORS_CORE
+	help
+	  Module to handle 3d contiguous sensors like
+	  Accelerometers, Gyroscope and Magnetometer that are
+	  presented by the ChromeOS EC Sensor hub.
+	  Creates an IIO device for each functions.
diff --git a/drivers/iio/common/cros_ec_sensors/Makefile b/drivers/iio/common/cros_ec_sensors/Makefile
index 95b6901..ec716ff 100644
--- a/drivers/iio/common/cros_ec_sensors/Makefile
+++ b/drivers/iio/common/cros_ec_sensors/Makefile
@@ -3,3 +3,4 @@
 #
 
 obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o
+obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
new file mode 100644
index 0000000..4741118
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
@@ -0,0 +1,322 @@
+/*
+ * cros_ec_sensors - Driver for Chrome OS Embedded Controller sensors.
+ *
+ * Copyright (C) 2015 Google, Inc
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This driver uses the cros-ec interface to communicate with the Chrome OS
+ * EC about accelerometer data. Accelerometer access is presented through
+ * iio sysfs.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/kernel.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+
+#include "cros_ec_sensors_core.h"
+
+#define MAX_CHANNELS (MAX_AXIS + 1)
+
+/* State data for ec_sensors iio driver. */
+struct cros_ec_sensors_state {
+	/* Shared by all sensors */
+	struct cros_ec_sensors_core_state core;
+
+	struct iio_chan_spec channels[MAX_CHANNELS];
+};
+
+static int cros_ec_sensors_read(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	struct cros_ec_sensors_state *st = iio_priv(indio_dev);
+	s16 data = 0;
+	s64 val64;
+	int i;
+	int ret = IIO_VAL_INT;
+	int idx = chan->scan_index;
+
+	mutex_lock(&st->core.cmd_lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (st->core.read_ec_sensors_data(indio_dev,
+						  1 << idx, &data) < 0)
+			ret = -EIO;
+		*val = data;
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
+		st->core.param.sensor_offset.flags = 0;
+
+		if (cros_ec_motion_send_host_cmd(&st->core, 0)) {
+			ret = -EIO;
+			break;
+		}
+
+		/* Save values */
+		for (i = X; i < MAX_AXIS; i++)
+			st->core.calib[i].offset =
+				st->core.resp->sensor_offset.offset[i];
+
+		*val = st->core.calib[idx].offset;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
+		st->core.param.sensor_range.data =
+			EC_MOTION_SENSE_NO_VALUE;
+
+		if (cros_ec_motion_send_host_cmd(&st->core, 0)) {
+			ret = -EIO;
+			break;
+		}
+		val64 = st->core.resp->sensor_range.ret;
+		switch (st->core.type) {
+		case MOTIONSENSE_TYPE_ACCEL:
+			/*
+			 * EC returns data in g, iio exepects m/s^2.
+			 * Do not use IIO_G_TO_M_S_2 to avoid precision loss.
+			 */
+			*val = div_s64(val64 * 980665, 10);
+			*val2 = 10000 << (CROS_EC_SENSOR_BITS - 1);
+			ret = IIO_VAL_FRACTIONAL;
+			break;
+		case MOTIONSENSE_TYPE_GYRO:
+			/* EC returns date in dps, iio expects rad/s.
+			 * Do not use IIO_DEGREE_TO_RAD to avoid precision
+			 * loss. Round to the nearest integer.
+			 */
+			*val = div_s64(val64 * 314159 + 9000000ULL, 1000);
+			*val2 = 18000 << (CROS_EC_SENSOR_BITS - 1);
+			ret = IIO_VAL_FRACTIONAL;
+			break;
+		case MOTIONSENSE_TYPE_MAG:
+			/*
+			 * EC returns date in 16LSB / uT,
+			 * iio expects Gauss
+			 */
+			*val = val64;
+			*val2 = 100 << (CROS_EC_SENSOR_BITS - 1);
+			ret = IIO_VAL_FRACTIONAL;
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+	default:
+		ret = cros_ec_sensors_core_read(
+				&st->core, chan, val, val2, mask);
+		break;
+	}
+	mutex_unlock(&st->core.cmd_lock);
+	return ret;
+}
+
+static int cros_ec_sensors_write(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val, int val2, long mask)
+{
+	struct cros_ec_sensors_state *st = iio_priv(indio_dev);
+	int i;
+	int ret = 0;
+	int idx = chan->scan_index;
+
+	mutex_lock(&st->core.cmd_lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		st->core.calib[idx].offset = val;
+		/* Send to EC for each axis, even if not complete */
+
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_OFFSET;
+		st->core.param.sensor_offset.flags =
+			MOTION_SENSE_SET_OFFSET;
+		for (i = X; i < MAX_AXIS; i++)
+			st->core.param.sensor_offset.offset[i] =
+				st->core.calib[i].offset;
+		st->core.param.sensor_offset.temp =
+			EC_MOTION_SENSE_INVALID_CALIB_TEMP;
+
+		if (cros_ec_motion_send_host_cmd(&st->core, 0))
+			ret = -EIO;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		if (st->core.type == MOTIONSENSE_TYPE_MAG) {
+			ret = -EINVAL;
+			break;
+		}
+		st->core.param.cmd = MOTIONSENSE_CMD_SENSOR_RANGE;
+		st->core.param.sensor_range.data = val;
+
+		/* Always roundup, so caller gets at least what it asks for. */
+		st->core.param.sensor_range.roundup = 1;
+
+		if (cros_ec_motion_send_host_cmd(&st->core, 0))
+			ret = -EIO;
+		break;
+	default:
+		ret = cros_ec_sensors_core_write(
+				&st->core, chan, val, val2, mask);
+		break;
+	}
+
+	mutex_unlock(&st->core.cmd_lock);
+	return ret;
+}
+
+static const struct iio_info ec_sensors_info = {
+	.read_raw = &cros_ec_sensors_read,
+	.write_raw = &cros_ec_sensors_write,
+	.driver_module = THIS_MODULE,
+};
+
+static int cros_ec_sensors_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent);
+	struct cros_ec_device *ec_device;
+	struct iio_dev *indio_dev;
+	struct cros_ec_sensors_state *state;
+	struct iio_chan_spec *channel;
+	int ret, i;
+
+	if (!ec_dev || !ec_dev->ec_dev) {
+		dev_warn(&pdev->dev, "No CROS EC device found.\n");
+		return -EINVAL;
+	}
+	ec_device = ec_dev->ec_dev;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, true);
+	if (ret)
+		return ret;
+
+	indio_dev->info = &ec_sensors_info;
+	state = iio_priv(indio_dev);
+	for (channel = state->channels, i = X; i < MAX_AXIS; i++, channel++) {
+		/* common part */
+		channel->info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_CALIBBIAS);
+		channel->info_mask_shared_by_all =
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_FREQUENCY) |
+			BIT(IIO_CHAN_INFO_SAMP_FREQ);
+		channel->scan_type.realbits = CROS_EC_SENSOR_BITS;
+		channel->scan_type.storagebits = CROS_EC_SENSOR_BITS;
+		channel->scan_type.shift = 0;
+		channel->scan_index = i;
+		channel->ext_info = cros_ec_sensors_ext_info;
+		channel->modified = 1;
+		channel->channel2 = IIO_MOD_X + i;
+		channel->scan_type.sign = 's';
+
+		state->core.calib[i].offset = 0;
+
+		/* sensor specific */
+		switch (state->core.type) {
+		case MOTIONSENSE_TYPE_ACCEL:
+			channel->type = IIO_ACCEL;
+			break;
+		case MOTIONSENSE_TYPE_GYRO:
+			channel->type = IIO_ANGL_VEL;
+			break;
+		case MOTIONSENSE_TYPE_MAG:
+			channel->type = IIO_MAGN;
+			break;
+		default:
+			dev_warn(&pdev->dev, "unknown\n");
+		}
+	}
+
+	/* Timestamp */
+	channel->type = IIO_TIMESTAMP;
+	channel->channel = -1;
+	channel->scan_index = MAX_AXIS;
+	channel->scan_type.sign = 's';
+	channel->scan_type.realbits = 64;
+	channel->scan_type.storagebits = 64;
+
+	indio_dev->channels = state->channels;
+	indio_dev->num_channels = MAX_CHANNELS;
+
+	/* There is only enough room for accel and gyro in the io space */
+	if ((state->core.ec->cmd_readmem != NULL) &&
+	    (state->core.type != MOTIONSENSE_TYPE_MAG))
+		state->core.read_ec_sensors_data = cros_ec_sensors_read_lpc;
+	else
+		state->core.read_ec_sensors_data = cros_ec_sensors_read_cmd;
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+					 cros_ec_sensors_capture, NULL);
+	if (ret)
+		return ret;
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_uninit_buffer;
+	return 0;
+
+error_uninit_buffer:
+	iio_triggered_buffer_cleanup(indio_dev);
+	return ret;
+}
+
+static int cros_ec_sensors_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	return 0;
+}
+
+static const struct platform_device_id cros_ec_sensors_ids[] = {
+	{
+		.name = "cros-ec-accel",
+	},
+	{
+		.name = "cros-ec-gyro",
+	},
+	{
+		.name = "cros-ec-mag",
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, cros_ec_sensors_ids);
+
+static struct platform_driver cros_ec_sensors_platform_driver = {
+	.driver = {
+		.name	= "cros-ec-sensors",
+		.pm	= &cros_ec_sensors_pm_ops,
+	},
+	.probe		= cros_ec_sensors_probe,
+	.remove		= cros_ec_sensors_remove,
+	.id_table	= cros_ec_sensors_ids,
+};
+module_platform_driver(cros_ec_sensors_platform_driver);
+
+MODULE_DESCRIPTION("ChromeOS EC 3-axis sensors driver");
+MODULE_LICENSE("GPL v2");
-- 
2.1.0