[PATCH 4/4] drm/mediatek: adjust VENCPLL clock for 4K HDMI output

[Bibby Hsieh]

if MT8173 display module can support 4K HDMI output,
we have to adjust VENCPLL clock from default 660MHz
to 800MHz.

Signed-off-by: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
---
 drivers/gpu/drm/mediatek/mtk_drm_drv.c |    9 +++++++++
 drivers/gpu/drm/mediatek/mtk_drm_drv.h |    1 +
 2 files changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index b1223d5..f159189 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -23,6 +23,7 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
+#include <linux/clk.h>
 
 #include "mtk_drm_crtc.h"
 #include "mtk_drm_ddp.h"
@@ -363,6 +364,14 @@ static int mtk_drm_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	private->vencpll_clk = devm_clk_get(dev, "vencpll");
+	if (IS_ERR(private->vencpll_clk)) {
+		ret = PTR_ERR(private->vencpll_clk);
+		dev_err(dev, "Failed to get vencpll clock: %d\n", ret);
+		return ret;
+	}
+	clk_set_rate(private->vencpll_clk, 800000000);
+
 	/* Iterate over sibling DISP function blocks */
 	for_each_child_of_node(dev->of_node->parent, node) {
 		const struct of_device_id *of_id;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
index aa93894..273ad02 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
@@ -40,6 +40,7 @@ struct mtk_drm_private {
 	void __iomem *config_regs;
 	struct device_node *comp_node[DDP_COMPONENT_ID_MAX];
 	struct mtk_ddp_comp *ddp_comp[DDP_COMPONENT_ID_MAX];
+	struct clk *vencpll_clk;
 
 	struct {
 		struct drm_atomic_state *state;
-- 
1.7.9.5