[PATCH 3/6] spi: octeon: Put register offsets into a struct
From: Jan Glauber
Date: Sat Jul 23 2016 - 06:44:01 EST
Instead of hard-coding the register offsets put them into a struct
and set them in the probe function.
Signed-off-by: Jan Glauber <jglauber@xxxxxxxxxx>
Tested-by: Steven J. Hill <steven.hill@xxxxxxxxxx>
---
drivers/spi/spi-octeon.c | 41 +++++++++++++++++++++++++++--------------
1 file changed, 27 insertions(+), 14 deletions(-)
diff --git a/drivers/spi/spi-octeon.c b/drivers/spi/spi-octeon.c
index e722040..209eddc 100644
--- a/drivers/spi/spi-octeon.c
+++ b/drivers/spi/spi-octeon.c
@@ -17,22 +17,30 @@
#include <asm/octeon/octeon.h>
#include <asm/octeon/cvmx-mpi-defs.h>
-#define OCTEON_SPI_CFG 0
-#define OCTEON_SPI_STS 0x08
-#define OCTEON_SPI_TX 0x10
-#define OCTEON_SPI_DAT0 0x80
-
#define OCTEON_SPI_MAX_BYTES 9
#define OCTEON_SPI_MAX_CLOCK_HZ 16000000
+struct octeon_spi_regs {
+ int config;
+ int status;
+ int tx;
+ int data;
+};
+
struct octeon_spi {
void __iomem *register_base;
u64 last_cfg;
u64 cs_enax;
int sys_freq;
+ struct octeon_spi_regs regs;
};
+#define OCTEON_SPI_CFG(x) (x->regs.config)
+#define OCTEON_SPI_STS(x) (x->regs.status)
+#define OCTEON_SPI_TX(x) (x->regs.tx)
+#define OCTEON_SPI_DAT0(x) (x->regs.data)
+
static void octeon_spi_wait_ready(struct octeon_spi *p)
{
union cvmx_mpi_sts mpi_sts;
@@ -41,7 +49,7 @@ static void octeon_spi_wait_ready(struct octeon_spi *p)
do {
if (loops++)
__delay(500);
- mpi_sts.u64 = readq(p->register_base + OCTEON_SPI_STS);
+ mpi_sts.u64 = readq(p->register_base + OCTEON_SPI_STS(p));
} while (mpi_sts.s.busy);
}
@@ -83,7 +91,7 @@ static int octeon_spi_do_transfer(struct octeon_spi *p,
if (mpi_cfg.u64 != p->last_cfg) {
p->last_cfg = mpi_cfg.u64;
- writeq(mpi_cfg.u64, p->register_base + OCTEON_SPI_CFG);
+ writeq(mpi_cfg.u64, p->register_base + OCTEON_SPI_CFG(p));
}
tx_buf = xfer->tx_buf;
rx_buf = xfer->rx_buf;
@@ -95,19 +103,19 @@ static int octeon_spi_do_transfer(struct octeon_spi *p,
d = *tx_buf++;
else
d = 0;
- writeq(d, p->register_base + OCTEON_SPI_DAT0 + (8 * i));
+ writeq(d, p->register_base + OCTEON_SPI_DAT0(p) + (8 * i));
}
mpi_tx.u64 = 0;
mpi_tx.s.csid = spi->chip_select;
mpi_tx.s.leavecs = 1;
mpi_tx.s.txnum = tx_buf ? OCTEON_SPI_MAX_BYTES : 0;
mpi_tx.s.totnum = OCTEON_SPI_MAX_BYTES;
- writeq(mpi_tx.u64, p->register_base + OCTEON_SPI_TX);
+ writeq(mpi_tx.u64, p->register_base + OCTEON_SPI_TX(p));
octeon_spi_wait_ready(p);
if (rx_buf)
for (i = 0; i < OCTEON_SPI_MAX_BYTES; i++) {
- u64 v = readq(p->register_base + OCTEON_SPI_DAT0 + (8 * i));
+ u64 v = readq(p->register_base + OCTEON_SPI_DAT0(p) + (8 * i));
*rx_buf++ = (u8)v;
}
len -= OCTEON_SPI_MAX_BYTES;
@@ -119,7 +127,7 @@ static int octeon_spi_do_transfer(struct octeon_spi *p,
d = *tx_buf++;
else
d = 0;
- writeq(d, p->register_base + OCTEON_SPI_DAT0 + (8 * i));
+ writeq(d, p->register_base + OCTEON_SPI_DAT0(p) + (8 * i));
}
mpi_tx.u64 = 0;
@@ -130,12 +138,12 @@ static int octeon_spi_do_transfer(struct octeon_spi *p,
mpi_tx.s.leavecs = !xfer->cs_change;
mpi_tx.s.txnum = tx_buf ? len : 0;
mpi_tx.s.totnum = len;
- writeq(mpi_tx.u64, p->register_base + OCTEON_SPI_TX);
+ writeq(mpi_tx.u64, p->register_base + OCTEON_SPI_TX(p));
octeon_spi_wait_ready(p);
if (rx_buf)
for (i = 0; i < len; i++) {
- u64 v = readq(p->register_base + OCTEON_SPI_DAT0 + (8 * i));
+ u64 v = readq(p->register_base + OCTEON_SPI_DAT0(p) + (8 * i));
*rx_buf++ = (u8)v;
}
@@ -194,6 +202,11 @@ static int octeon_spi_probe(struct platform_device *pdev)
p->register_base = reg_base;
p->sys_freq = octeon_get_io_clock_rate();
+ p->regs.config = 0;
+ p->regs.status = 0x08;
+ p->regs.tx = 0x10;
+ p->regs.data = 0x80;
+
master->num_chipselect = 4;
master->mode_bits = SPI_CPHA |
SPI_CPOL |
@@ -226,7 +239,7 @@ static int octeon_spi_remove(struct platform_device *pdev)
struct octeon_spi *p = spi_master_get_devdata(master);
/* Clear the CSENA* and put everything in a known state. */
- writeq(0, p->register_base + OCTEON_SPI_CFG);
+ writeq(0, p->register_base + OCTEON_SPI_CFG(p));
return 0;
}
--
2.9.0.rc0.21.g7777322