Re: [RFC PATCH v3 00/13] ACPI IORT ARM SMMU v3 support

[Dennis Chen]

Hi
On Wed, Jul 20, 2016 at 12:23:22PM +0100, Lorenzo Pieralisi wrote:
> This RFC patch series is v3 of a previous posting:
> 
> https://lkml.org/lkml/2016/6/7/523
> 
> v2 -> v3
> 	- Rebased on top of dependencies series [1][2][3](v4.7-rc3)
> 	- Added back reliance on ACPI early probing infrastructure
> 	- Patch[1-3] merged through other dependent series
> 	- Added back IOMMU fwnode generalization
> 	- Move SMMU v3 static functions configuration to IORT code
> 	- Implemented generic IOMMU fwspec API
> 	- Added code to implement fwnode platform device look-up
> 
> v1 -> v2:
> 	- Rebased on top of dependencies series [1][2][3](v4.7-rc1)
> 	- Removed IOMMU fwnode generalization
> 	- Implemented ARM SMMU v3 ACPI probing instead of ARM SMMU v2
> 	  owing to patch series dependencies [1]
> 	- Moved platform device creation logic to IORT code to
> 	  generalize its usage for ARM SMMU v1-v2-v3 components
> 	- Removed reliance on ACPI early device probing
> 	- Created IORT specific iommu_xlate() translation hook leaving
> 	  OF code unchanged according to v1 reviews
> 
> The ACPI IORT table provides information that allows instantiating
> ARM SMMU devices and carrying out id mappings between components on
> ARM based systems (devices, IOMMUs, interrupt controllers).
> 
> http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf
> 
> Building on basic IORT support, available through [2]:
> 
> this patchset enables ARM SMMU v3 support on ACPI systems.
> 
> Most of the code is aimed at building the required generic ACPI
> infrastructure to create and enable IOMMU components and to bring
> the IOMMU infrastructure for ACPI on par with DT, which is going to
> make future ARM SMMU components easier to integrate.
> 
> PATCH (1) adds a FWNODE_IOMMU type to the struct fwnode_handle type.
>           It is required to attach a fwnode identifier to platform
>           devices allocated/detected through IORT tables entries;
>           IOMMU devices have to have an identifier to look them up
>           eg IOMMU core layer carrying out id translation. This can be
>           done through a fwnode_handle (ie IOMMU platform devices created
>           out of IORT tables are not ACPI devices hence they can't be
>           allocated as such, otherwise they would have a fwnode_handle of
>           type FWNODE_ACPI). This patch requires discussion and it is key
>           to the RFC.
> 
> PATCH (2) makes use of the ACPI early probing API to add a linker script
>           section for probing devices via IORT ACPI kernel code.
> 
> PATCH (3) provides IORT support for registering IOMMU IORT node through
>           their fwnode handle.
> 
> PATCH (4) implements core code fwnode based platform devices look-up.
> 
> PATCH (5) extends iommu_fwspec so that it can be used on ACPI based
>           system by creating a generic IOMMU fwspec kernel layer.
> 
> PATCH (6) implements the of_dma_configure() API in ACPI world -
>           acpi_dma_configure() - and patches PCI and ACPI core code to
>           start making use of it.
> 
> PATCH (7) provides an IORT function to detect existence of specific type
>           of IORT components.
> 
> PATCH (8) creates the kernel infrastructure required to create ARM SMMU
>           platform devices for IORT nodes.
> 
> PATCH (9) refactors the ARM SMMU v3 driver so that the init functions are
>           split in a way that groups together code that probes through DT
>           and code that carries out HW registers FW agnostic probing, in
>           preparation for adding the ACPI probing path.
> 
> PATCH (10) rework ARM SMMU v3 platform driver registration to make it work
>            on ACPI systems.
> 
> PATCH (11) Building on patch (8), it adds ARM SMMU v3 IORT IOMMU
>            operations to create and probe ARM SMMU v3 components.
> 
> PATCH (12) Extend the IORT iort_node_map_rid() to work on a type mask
>            instead of a single type so that the translation API can
>            be used on a range of components.
> 
> PATCH (13) provides IORT infrastructure to carry out IOMMU configuration
>            for devices and hook it up to the previously introduced ACPI
>            DMA configure API.
> 
> This patchset is built on top and depends on these three patch series:
> 
> [1] R.Murphy "Generic DT bindings for PCI and ARM SMMU v3" v4
>     https://marc.info/?l=devicetree&m=146739193215518&w=2
> 
> [2] T.Nowicki "Introduce ACPI world to ITS irqchip" v7
>     https://marc.info/?l=linux-arm-kernel&m=146642080022289&w=2
> 
> [3] T.Nowicki "Support for ARM64 ACPI based PCI host controller" v8
>     http://marc.info/?l=linux-acpi&m=146462129816292&w=2
> 
> and is provided for early review/testing purposes here:
> 
> git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git acpi/iort-smmu-v3i
>
I thought I can got all the 13 patches applied with the above git tree, but I can't find
any ACPI related stuff after I cloned the git repos to my local machine, am I missing
something here?

Thanks,
Dennis
> 
> Tested on FVP models for ARM SMMU v3 probing path.
> 
> Lorenzo Pieralisi (13):
>   drivers: iommu: add FWNODE_IOMMU fwnode type
>   drivers: acpi: iort: introduce linker section for IORT entries probing
>   drivers: acpi: iort: add support for IOMMU fwnode registration
>   drivers: platform: add fwnode base platform devices retrieval
>   drivers: iommu: make iommu_fwspec OF agnostic
>   drivers: acpi: implement acpi_dma_configure
>   drivers: acpi: iort: add node match function
>   drivers: acpi: iort: add support for ARM SMMU platform devices
>     creation
>   drivers: iommu: arm-smmu-v3: split probe functions into DT/generic
>     portions
>   drivers: iommu: arm-smmu-v3: enable ACPI driver initialization
>   drivers: iommu: arm-smmu-v3: add IORT platform device creation
>   drivers: acpi: iort: replace rid map type with type mask
>   drivers: acpi: iort: introduce iort_iommu_configure
> 
>  drivers/acpi/glue.c               |   4 +-
>  drivers/acpi/iort.c               | 360 +++++++++++++++++++++++++++++++++++++-
>  drivers/acpi/scan.c               |  29 +++
>  drivers/base/platform.c           |  23 +++
>  drivers/iommu/Kconfig             |   4 +
>  drivers/iommu/Makefile            |   1 +
>  drivers/iommu/arm-smmu-v3.c       | 147 ++++++++++++++--
>  drivers/iommu/iommu-fwspec.c      | 114 ++++++++++++
>  drivers/iommu/of_iommu.c          |  52 ------
>  drivers/pci/probe.c               |   3 +-
>  include/acpi/acpi_bus.h           |   2 +
>  include/asm-generic/vmlinux.lds.h |   1 +
>  include/linux/acpi.h              |   5 +
>  include/linux/fwnode.h            |   1 +
>  include/linux/iommu-fwspec.h      |  60 +++++++
>  include/linux/iommu.h             |  25 +++
>  include/linux/iort.h              |  19 ++
>  include/linux/of_iommu.h          |  24 +--
>  include/linux/platform_device.h   |   3 +
>  19 files changed, 782 insertions(+), 95 deletions(-)
>  create mode 100644 drivers/iommu/iommu-fwspec.c
>  create mode 100644 include/linux/iommu-fwspec.h
> 
> -- 
> 2.6.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>