[PATCH 4.6 090/203] iommu/vt-d: Enable QI on all IOMMUs before setting root entry

[Greg Kroah-Hartman]

4.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joerg Roedel <jroedel@xxxxxxx>

commit a4c34ff1c029e90e7d5f8dd8d29b0a93b31c3cb2 upstream.

This seems to be required on some X58 chipsets on systems
with more than one IOMMU. QI does not work until it is
enabled on all IOMMUs in the system.

Reported-by: Dheeraj CVR <cvr.dheeraj@xxxxxxxxx>
Tested-by: Dheeraj CVR <cvr.dheeraj@xxxxxxxxx>
Fixes: 5f0a7f7614a9 ('iommu/vt-d: Make root entry visible for hardware right after allocation')
Signed-off-by: Joerg Roedel <jroedel@xxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/iommu/intel-iommu.c |   17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -3169,11 +3169,6 @@ static int __init init_dmars(void)
 			}
 		}
 
-		iommu_flush_write_buffer(iommu);
-		iommu_set_root_entry(iommu);
-		iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL);
-		iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
-
 		if (!ecap_pass_through(iommu->ecap))
 			hw_pass_through = 0;
 #ifdef CONFIG_INTEL_IOMMU_SVM
@@ -3182,6 +3177,18 @@ static int __init init_dmars(void)
 #endif
 	}
 
+	/*
+	 * Now that qi is enabled on all iommus, set the root entry and flush
+	 * caches. This is required on some Intel X58 chipsets, otherwise the
+	 * flush_context function will loop forever and the boot hangs.
+	 */
+	for_each_active_iommu(iommu, drhd) {
+		iommu_flush_write_buffer(iommu);
+		iommu_set_root_entry(iommu);
+		iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL);
+		iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH);
+	}
+
 	if (iommu_pass_through)
 		iommu_identity_mapping |= IDENTMAP_ALL;