[PATCH v4 2/2] irqchip: add J-Core AIC driver

[Rich Felker]

There are two versions of the J-Core interrupt controller in use, aic1
which generates interrupts with programmable priorities, but only
supports 8 irq lines and maps them to cpu traps in the range 17 to 24,
and aic2 which uses traps in the range 64-127 and supports up to 128
irqs, with priorities dependent on the interrupt number. The Linux
driver does not make use of priorities anyway.

For simplicity, there is no aic1-specific logic in the driver beyond
setting the priority register, which is necessary for interrupts to
work at all. Eventually aic1 will likely be phased out, but it's
currently in use in deployments and all released bitstream binaries.

Signed-off-by: Rich Felker <dalias@xxxxxxxx>
---
 drivers/irqchip/Kconfig         |  6 ++++
 drivers/irqchip/Makefile        |  1 +
 drivers/irqchip/irq-jcore-aic.c | 79 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 86 insertions(+)
 create mode 100644 drivers/irqchip/irq-jcore-aic.c

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index fa33c50..fe58177 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -150,6 +150,12 @@ config PIC32_EVIC
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
 
+config JCORE_AIC
+	bool "J-Core integrated AIC"
+	select IRQ_DOMAIN
+	help
+	  Support for the J-Core integrated AIC.
+
 config RENESAS_INTC_IRQPIN
 	bool
 	select IRQ_DOMAIN
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 38853a1..5b1a2fa 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_I8259)			+= irq-i8259.o
 obj-$(CONFIG_IMGPDC_IRQ)		+= irq-imgpdc.o
 obj-$(CONFIG_IRQ_MIPS_CPU)		+= irq-mips-cpu.o
 obj-$(CONFIG_SIRF_IRQ)			+= irq-sirfsoc.o
+obj-$(CONFIG_JCORE_AIC)			+= irq-jcore-aic.o
 obj-$(CONFIG_RENESAS_INTC_IRQPIN)	+= irq-renesas-intc-irqpin.o
 obj-$(CONFIG_RENESAS_IRQC)		+= irq-renesas-irqc.o
 obj-$(CONFIG_VERSATILE_FPGA_IRQ)	+= irq-versatile-fpga.o
diff --git a/drivers/irqchip/irq-jcore-aic.c b/drivers/irqchip/irq-jcore-aic.c
new file mode 100644
index 0000000..7b3b30e
--- /dev/null
+++ b/drivers/irqchip/irq-jcore-aic.c
@@ -0,0 +1,79 @@
+/*
+ * J-Core SoC AIC driver
+ *
+ * Copyright (C) 2015-2016 Smart Energy Instruments, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/cpu.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define AIC1_INTPRI 8
+
+static struct aic_data {
+	struct irq_chip chip;
+	struct irq_domain *domain;
+	struct notifier_block nb;
+} aic_data;
+
+static int aic_irqdomain_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hwirq)
+{
+	struct aic_data *aic = d->host_data;
+
+	irq_set_chip_data(irq, aic);
+	irq_set_chip_and_handler(irq, &aic->chip, handle_simple_irq);
+	irq_set_probe(irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops aic_irqdomain_ops = {
+	.map = aic_irqdomain_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static void noop(struct irq_data *data)
+{
+}
+
+int __init aic_irq_of_init(struct device_node *node, struct device_node *parent)
+{
+	struct aic_data *aic = &aic_data;
+	unsigned min_irq = 64;
+
+	pr_info("Initializing J-Core AIC\n");
+
+	if (!of_device_is_compatible(node, "jcore,aic2")) {
+		unsigned cpu;
+		for_each_possible_cpu(cpu) {
+			void __iomem *base = of_iomap(node, cpu);
+			if (!base)
+				continue;
+			pr_info("Local AIC1 enable for cpu %u at %p\n",
+				cpu, base + AIC1_INTPRI);
+			__raw_writel(0xffffffff, base + AIC1_INTPRI);
+		}
+		min_irq = 16;
+	}
+
+	aic->chip.name = node->name;
+	aic->chip.irq_mask = noop;
+	aic->chip.irq_unmask = noop;
+
+	aic->domain = irq_domain_add_linear(node, 128, &aic_irqdomain_ops, aic);
+	irq_create_strict_mappings(aic->domain, min_irq, min_irq, 128-min_irq);
+
+	return 0;
+}
+
+IRQCHIP_DECLARE(jcore_aic2, "jcore,aic2", aic_irq_of_init);
+IRQCHIP_DECLARE(jcore_aic1, "jcore,aic1", aic_irq_of_init);
-- 
2.8.1