[PATCH 0440/1285] Replace numeric parameter like 0444 with macro

[Baole Ni]

I find that the developers often just specified the numeric value
when calling a macro which is defined with a parameter for access permission.
As we know, these numeric value for access permission have had the corresponding macro,
and that using macro can improve the robustness and readability of the code,
thus, I suggest replacing the numeric parameter with the macro.

Signed-off-by: Chuansheng Liu <chuansheng.liu@xxxxxxxxx>
Signed-off-by: Baole Ni <baolex.ni@xxxxxxxxx>
---
 drivers/media/pci/b2c2/flexcop-pci.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/pci/b2c2/flexcop-pci.c b/drivers/media/pci/b2c2/flexcop-pci.c
index 4cac1fc..2084b53 100644
--- a/drivers/media/pci/b2c2/flexcop-pci.c
+++ b/drivers/media/pci/b2c2/flexcop-pci.c
@@ -8,12 +8,12 @@
 #include "flexcop-common.h"
 
 static int enable_pid_filtering = 1;
-module_param(enable_pid_filtering, int, 0444);
+module_param(enable_pid_filtering, int, S_IRUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(enable_pid_filtering,
 	"enable hardware pid filtering: supported values: 0 (fullts), 1");
 
 static int irq_chk_intv = 100;
-module_param(irq_chk_intv, int, 0644);
+module_param(irq_chk_intv, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ streaming watchdog.");
 
 #ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG
@@ -32,7 +32,7 @@ MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ streaming watchdog.");
 #define deb_chk(args...) dprintk(0x10, args)
 
 static int debug;
-module_param(debug, int, 0644);
+module_param(debug, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(debug,
 	"set debug level (1=info,2=regs,4=TS,8=irqdma,16=check (|-able))."
 	DEBSTATUS);
-- 
2.9.2