[PATCH 0592/1285] Replace numeric parameter like 0444 with macro

[Baole Ni]

I find that the developers often just specified the numeric value
when calling a macro which is defined with a parameter for access permission.
As we know, these numeric value for access permission have had the corresponding macro,
and that using macro can improve the robustness and readability of the code,
thus, I suggest replacing the numeric parameter with the macro.

Signed-off-by: Chuansheng Liu <chuansheng.liu@xxxxxxxxx>
Signed-off-by: Baole Ni <baolex.ni@xxxxxxxxx>
---
 drivers/media/usb/dvb-usb-v2/mxl111sf.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
index 5d676b5..bf24e56 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
@@ -28,16 +28,16 @@
 #define MAX_XFER_SIZE  64
 
 int dvb_usb_mxl111sf_debug;
-module_param_named(debug, dvb_usb_mxl111sf_debug, int, 0644);
+module_param_named(debug, dvb_usb_mxl111sf_debug, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(debug, "set debugging level "
 		 "(1=info, 2=xfer, 4=i2c, 8=reg, 16=adv (or-able)).");
 
 static int dvb_usb_mxl111sf_isoc;
-module_param_named(isoc, dvb_usb_mxl111sf_isoc, int, 0644);
+module_param_named(isoc, dvb_usb_mxl111sf_isoc, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(isoc, "enable usb isoc xfer (0=bulk, 1=isoc).");
 
 static int dvb_usb_mxl111sf_spi;
-module_param_named(spi, dvb_usb_mxl111sf_spi, int, 0644);
+module_param_named(spi, dvb_usb_mxl111sf_spi, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(spi, "use spi rather than tp for data xfer (0=tp, 1=spi).");
 
 #define ANT_PATH_AUTO 0
@@ -51,7 +51,7 @@ static int dvb_usb_mxl111sf_rfswitch =
 		ANT_PATH_EXTERNAL;
 #endif
 
-module_param_named(rfswitch, dvb_usb_mxl111sf_rfswitch, int, 0644);
+module_param_named(rfswitch, dvb_usb_mxl111sf_rfswitch, int, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(rfswitch, "force rf switch position (0=auto, 1=ext, 2=int).");
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-- 
2.9.2